Impex IVT-50 - Manual - manualsarea.com

Page 2 - INC. For your safety and benefit, read this manual carefully before; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE IDENTIFIER.....….............................................................

Page 3 - IMPORTANT SAFETY NOTICE; children unattended in the same room with the machine.; Make sure the Foot Lock securely locks both feet.

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE IDENTIFIER

HARDWARE IDENTIFIER NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 4

Page 6 - ASSEMBLY INSTRUCTION; Do not tighten the Nuts and Bolts until instructed to do so.

ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten the Nuts and Bolts until instructed to do so....

Page 7 - DIAGRAM 1

Page 8 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the two Pivot Brackets (#12) to the Backrest Frame (#7) from each side. B.) Secure each Pivot Bracket to the Backrest Frame with two M8 x ¾” Allen Bolts (#38) and two Ø ¾” Washers (#45). C.) Lift the Backrest Frame and insert the two Pivot Brackets into the open slo...

Page 9 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Left Handle (#8) to Front Support Frame (#1). Secure it with one M8 x ¾” Allen Bolt (#35), one Ø 5/8” Washer (#46), and one M8 Aircraft Nut (#43). B.) Attach the Left Handle to the Rear Support Frame (#2). Secure it with one M8 x 1 ¾” Allen Bolt (#36), one Ø 5/8...

Page 10 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Pull up the Foot Adjustment Lock Pin (#23). Insert the Foot Lock Frame (#13) into the Adjustment Fame (#11). Push down the Pin to securely lock the Foot Lock Frame in position. B.) Insert the Foot Support (#6) into the bottom of Adjustment Frame. Secure it with one M8 x 1 ...

Page 11 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Pull out the Backrest Adjustment Lock Pin (#22). Insert the Adjustment Frame (#11) into the opening on the vertical frame on the back of Backrest Frame (#7). Push back the Pin into the selected hole on Adjustment Frame. B.) Insert the Ring Lock Pin (#21) through the hole o...

Page 13 - PARTS LIST; DESCRIPTION

PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Front Support Frame 1 2 Rear Support Frame 1 3 Short Horizontal Support 2 4 Right Long Horizontal Support 1 5 Left Long Horizontal Support 1 6 Foot Support 1 7 Backrest Frame 1 8 Left Handle 1 9 Right Handle 1 10 Foam Tube 1 11 Adjustment Frame 1 12 Pivot Br...

Page 14 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...

Impex IVT-50 - Manual

Table of Contents:

Summary

Other Impex Models