Impex IGS-705 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; INC. For your safety and benefit, read this manual carefully; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDWARE PACK ……….....…............................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - Hardware Pack

Hardware Pack NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4

Page 7 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach the Main Seat Support (#1) to Cross Brace (#2). Secure it with two M10 x 3 1/8” Carriage Bolt (#26), one Bracket (#14), two Ø ¾” Washer (#35), and two M10 Aircraft Nut (#33). C.) Attach the Leg Develop...

Page 8 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#5) to the Leg Developer Holder (#4). Secure it with one M8 x 2 ¾” Allen Bolt (#29), two Ø 5/8” Washers (#36), and one M8 Aircraft Nut (#34). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able to swivel. B.) Insert two Foam ...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Sliding Block (#7) to the Main Seat Support (#3). Secure it with one M10 x 4” Hex Bolt (#30), one Ø ¾” Washer (#35), and one M10 Aircraft Nut (#33). B.) Attach the pivot on the Backrest Support (#9) to the bracket on Main Seat Support. Secure it with one M10 x 3...

Page 10 - DIAGRAM 5

Step-5 (See Diagram 5) A.) Attach the Backrest Board (#18) to Backrest Support (#9). Secure it with four M6 x ¾” Hex Bolts (#38) and four Ø ½” Washers (#37). B.) Attach the Seat Pad (#39) onto the Main Seat Support (#3). Secure it with four M6 x 1 ¼” Hex Bolts (#32) and four Ø ½” Washers (#37). C.) ...

Page 12 - PARTS LIST

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Upright Beam 2 2 Cross Brace 1 3 Main Seat Support 1 4 Leg Developer Holder 1 5 Leg Developer 1 6 Bar Catch 2 7 Sliding Block 1 8 Incline Adjustment Frame 1 9 Backrest Support 1 10 Weight Post 2 11 Diagonal Support 1 12 Foam Tube 2 13 Foam Roll 4 14 Bracket 1 15...

Page 13 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...

Impex IGS-705 - Manual

Table of Contents:

Summary

Other Impex Models