Page 2 - Product description
Contents Introduction..................................................................... 2 Safety..............................................................................4 Assembly...................................................................... 12 Operation.................................
Page 4 - Safety; Safety definitions; Work area safety
Use and keep the battery charger indoors only. Double insulation. Safety Safety definitions The definitions below give the level of severity for each signal word. WARNING: Injury to persons. CAUTION: Damage to the product. Note: This information makes the product easier to use. General power tool sa...
Page 6 - Causes and operator prevention of kickback; General safety instructions
• Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain saw for cutting plastic, masonry or nonwood building materials. Use of the chain saw for operations different than intended could result in a hazardous situation. • We strongly recommend that first time us...
Page 10 - Battery safety
brake. If a kickback occur when you use the product, hold tight around the handles and do not let go. The front hand guard also decreases the risk to hit the saw chain if your hand lets go of the front handle. In the felling position you can not engage the chain brake manually. The chain brake can i...
Page 11 - Safety instructions for the cutting equipment
you get battery acid in your eyes, do not rub but flush with water for minimum 15 minutes. If battery acid has touched your skin, you must clean the skin with a large quantity of water and soap. Get medical aid. • Use the battery in temperatures between -10 °C (14 °F) and 40 °C (104 °F). • Do not cl...
Page 12 - Assembly; To assemble the guide bar and saw
• Keep the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback. • Make sure that the saw chain has the correct tension! If the saw chain is not tight against the guide bar, the risk for it to come lo...
Page 13 - To assemble a spiked bumper; Operation; Introduction
3. Put the guide bar on top of the bar bolt. Steer the guide bar to its most rear position. Lift the saw chain above the drive sprocket and engage it in the groove on the guide bar. Start on the top edge of the guide bar. 4. Make sure that the edges of the cutting links are turned forward on the top...
Page 17 - Common questions about kickback; To prepare the product for operation in
that you understand the causes of kickback and that you can prevent them with correct working technique. If you are prepared you decrease the risk. A kickback occur when the kickback zone touches an object with a rotating saw chain. A kickback can occur suddenly and with large force, which throws th...
Page 19 - Maintenance; To do a check of the front hand guard
3. Lift the branch and remove the product from the cut at the same time. Use a lever to open up the cut. WARNING: Do not try to pull the product free. Risk of serious injury. 4. Use a handsaw or a second chainsaw to release the product if necessary. Cut the branch at a minimum of 30 cm/12 in from th...
Page 20 - To do a check of the battery and the
2. Press down the power trigger lockout and make sure that it goes back to its initial position when you release it. 3. Make sure that the power trigger is locked at the idle position when the power trigger lockout is released. 4. Start the product and apply full power.5. Release the power trigger a...
Page 21 - Information about the guide bar and saw chain
To do a check of the battery charger 1. Make sure that the battery charger and the power supply cord is not damaged. Look for cracks and other defects. To clean the cooling system The product has a cooling system that keeps the temperature of the product as low as possible.The cooling system include...
Page 23 - To tighten the saw chain
2. Make sure that the saw chain has the correct tension. A saw chain without the correct tension moves from side to side. This does not make it easy to sharpen the saw chain. See To tighten the saw chain on page 23 for instructions. 3. Move the file from the inner side of the cutting teeth and out. ...
Page 26 - Troubleshooting; Troubleshooting schedule
Maintenance Before use Weekly Monthly Clean the external parts of the product. X Make sure that the power trigger and the power trigger lockout function correctly from a safety point of view. X Clean the chain brake and make sure that it operates safely. Make sure that the chain catcher is not damag...
Page 27 - Transportation, storage and disposal; Transportation and storage
LED display Possible faults Possible action Warning indicator flashing. Chain brake engaged. Pull back the front hand guard to re- lease the chain brake. Temperature deviation. Allow the product to cool down. Overload. Cutting attachment jam- med. The cutting attachment is jammed. Release the cuttin...
Page 28 - Technical data
• Obey the special requirement on package and labels for commercial transportations, including by third parties and forwarding agents. • Speak to a person with special training in dangerous material before you send the product. Obey all applicable national regulations. • Use tape on open contacts wh...
Page 29 - Accessories; Guide bar and saw chain combinations
T536LiXP Sound levels 2 Equivalent sound pressure level at the operator's ear, dB(A) 93 Vibration levels 3 Front handle m/s 2 3,3 Rear handle m/s 2 3,7 Equivalent vibration levels 4 Front handle m/s 2 2,0 Rear handle m/s 2 2,4 Saw chain/guide bar Recommended bar lengths, inch/cm 10-14/25-35 Usable c...
Page 30 - Approved batteries for the product; Approved battery chargers for the product
38 11/64 in/4,5 mm 90° 30° 0° 0.025 in/ 0,65 mm 5056981-03 5795588-01 Approved batteries for the product Battery BLi110 BLi150 Type Lithium-ion Lithium-ion Battery capacity, Ah 3,0 4,2 Nominal voltage, V 36 36 Weight, kg/lb 1,2/2.6 1,3/2.9 Battery runtime, min, with SavE acti- vated (free run). 35 3...
Page 31 - EC Declaration of Conformity; EC Declaration of conformity
EC Declaration of Conformity EC Declaration of conformity Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the cordless battery chainsaw Husqvarna T536LiXP from 2016’s serial numbers and onwards (the year is clearly stated in plain text on the ty...
