Page 2 - Symbols on the mac
KEY T O SYMBOLS 2 – English Symbols on the mac hine: T ranslation of the original Swedish operating instruction. WARNING! Trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the c...
Page 3 - Symbols in the operator’
KEY T O SYMBOLS English – 3 Symbols in the operator’ s manual: The machine is tur ned on and off by pressing the on and stop button. Always remove the battery to prevent the machine being started by accident. Always wear approved protective gloves. Regular cleaning is required. Visual check. Remove ...
Page 4 - CONTENTS; Contents
CONTENTS 4 – English Contents Note the f ollowing before starting: Please read the oper ator's manual carefully. KEY TO SYMBOLS Symbols on the machine: ...................................... 2 Symbols on the battery and/or on the battery charger: ........................................................
Page 5 - Dear Customer
English – 5 INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The loc...
Page 7 - General po
GENERAL SAFETY PRECA UTIONS English – 7 General po wer tool safety warnings Please read the oper ator’s manual carefully and make sure you understand the instructions before using the machine. Chec k before starting • Always remove the battery to prevent the machine being started by accident. Always...
Page 8 - Impor; ersonal protective equipment
GENERAL SAFETY PRECA UTIONS 8 – English Impor tant P ersonal protective equipment W ARNING! There is a risk of burns as the gear housing can become very hot. Use gloves when working with the trimmer head. HEARING PROTECTION Wear hearing protection that provides adequate noise reduction. EYE PROTECTI...
Page 9 - GENERAL SAFETY PRECAUTIONS; Battery safety; Battery charger safety
GENERAL SAFETY PRECAUTIONS English – 9 Battery safety The rechargeable Husqvarna batteries, BLi, are exclusively used as a power supply for the relevant Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices. • Use the battery in surroundings...
Page 10 - Machine; Control panel
GENERAL SAFETY PRECAUTIONS 10 – English Do not charge: • non-rechargeable batteries in the battery charger or use them in the machine. • the battery in the battery charge outdoors. • the battery in the rain or in wet conditions. • the battery in direct sunlight. Use the battery charger only when the...
Page 11 - Cutting attachment guard; Cutting equipment
GENERAL SAFETY PRECAUTIONS English – 11 Make sure the power trigger is locked when the power trigger lock is in its original position. Press the power trigger and make sure it returns to its original position when you release it. Check that the power trigger and the power trigger lockout move freely...
Page 12 - Trimmer head
GENERAL SAFETY PRECAUTIONS 12 – English Trimmer head • Only use the recommended trimmer heads and trimmer lines. These have been tested by the manufacturer to suit a particular motor size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting atta...
Page 13 - ASSEMBLY; Fitting the loop handle; Fitting the handlebar
ASSEMBLY English – 13 Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a co...
Page 14 - Standard harness; Quick release; Transport position, handlebar
ASSEMBLY 14 – English Standard harness Quick release At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free yourself from the machine and harness. Spreading the load on your shoulders A well-adjusted harn...
Page 15 - BATTERY HANDLING; Battery; Connect the battery charger
BATTERY HANDLING English – 15 Battery The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an ...
Page 16 - Transport and storage
BATTERY HANDLING 16 – English Transport and storage • Secure the machine during transport. • Always remove the battery for storage or transport. • Store the battery and the battery charger in a dry, moisture-free and frost-free space. • To prevent accidents, ensure that your battery is not connected...
Page 17 - STARTING AND STOPPING; Check before starting; Starting; Stopping
STARTING AND STOPPING English – 17 Check before starting • Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary. • Check that the trimmer head is completely attached to the trimmer. • Check that the machine is in perfect ...
Page 18 - WORKING TECHNIQUES; General working instructions; Basic safety rules
WORKING TECHNIQUES 18 – English General working instructions Basic safety rules Wear personal protective equipment. See instructions under the ”Personal protective equipment” heading. 1 Look around you: • To ensure that people, animals or other things cannot affect your control of the machine. • To ...
Page 19 - Safety instructions after completing work
WORKING TECHNIQUES English – 19 Safety instructions after completing work • Make sure the cutting attachment has stopped before cleaning, carrying out repairs or an inspection. Remove the battery from the machine. SavE mode The machine is equipped with a battery saving function (SavE). Activate the ...
Page 21 - MAINTENANCE; Inspection and maintenance; Cleaning
MAINTENANCE English – 21 Inspection and maintenance All servicing and repair work on the machine requires special training. This is especially true of the machine ′ s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of ou...
Page 22 - Troubleshooting schedule; Keypad
22 – English MAINTENANCE Troubleshooting schedule Troubleshooting takes place from the keypad. Keypad Troubleshooting the battery and/or the battery charger during charging. Battery Battery charger Control panel Possible faults Possible action Green activate LED flashing. Low battery voltage. Chargi...
Page 23 - Maintenance schedule
English – 23 MAINTENANCE Maintenance schedule The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More ex...
Page 24 - TECHNICAL DATA; Technical data
24 – English TECHNICAL DATA Technical data Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EC directive 2000/14/ EC. The difference between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement...
