Page 2 - Symbols on the mac; Symbols in the operator’
KEY T O SYMBOLS 2 – English Symbols on the mac hine: T ranslation of the original Swedish operating instruction. WARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand...
Page 4 - CONTENTS; Contents
CONTENTS 4 – English Contents Note the f ollowing before starting: Please read the oper ator's manual carefully. KEY TO SYMBOLS Symbols on the machine: ...................................... 2 Symbols on the battery and/or on the battery charger: ........................................................
Page 5 - Dear Customer
English – 5 INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The loc...
Page 7 - General po; ork area safety; Electrical saf; ower tool use and care
GENERAL SAFETY PRECA UTIONS English – 7 General po wer tool safety warnings Please read the oper ator’s manual carefully and make sure you understand the instructions before using the machine. The machine is only designed for cutting branches and twigs. Always remove the battery to prevent the machi...
Page 8 - Battery tool use and care; Service
GENERAL SAFETY PRECA UTIONS 8 – English • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. • Stor...
Page 9 - GENERAL SAFETY PRECAUTIONS; Personal protective equipment
GENERAL SAFETY PRECAUTIONS English – 9 Personal protective equipment HEARING PROTECTION Wear hearing protection that provides adequate noise reduction. EYE PROTECTION Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective gogg...
Page 10 - Battery safety; Battery charger safety
GENERAL SAFETY PRECAUTIONS 10 – English Battery safety The rechargeable Husqvarna batteries, BLi, are exclusively used as a power supply for the relevant Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices. • Use the battery in surrounding...
Page 11 - Machine; Control panel; Power trigger lockout
GENERAL SAFETY PRECAUTIONS English – 11 Do not charge: • non-rechargeable batteries in the battery charger or use them in the machine. • the battery in the battery charger outdoors. • the battery in the rain or in wet conditions. • the battery in direct sunlight. Use the battery charger only when th...
Page 12 - Hand guard; Blade and blade guard
GENERAL SAFETY PRECAUTIONS 12 – English • Then press the power trigger up to apply full power. Release the power trigger and check thereby the free back movement of the power trigger. The cutting unit must stop within 1 second. Restart the machine and release the power trigger lockout on the front h...
Page 13 - BATTERY HANDLING; Battery status; Connect the battery charger
BATTERY HANDLING English – 13 Battery status The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit w...
Page 14 - Transport and storage
BATTERY HANDLING 14 – English Transport and storage • The contained lithium-ion-batteries are subject to the Dangerous Goods Legislation requirements. • For commercial transports e.g. by third parties, forwarding agents, special requirement on packing and labeling must be observed. • For preparation...
Page 15 - STARTING AND STOPPING; Check before starting; Starting
STARTING AND STOPPING English – 15 Check before starting • Inspect the working area. Remove any objects that could be thrown out. • Check the cutting attachment. Never use blades that are dull, cracked or damaged. • Check that the machine is in perfect working order. Check that all nuts and screws a...
Page 16 - WORKING TECHNIQUES; General working instructions; Basic safety rules
WORKING TECHNIQUES 16 – English General working instructions Basic safety rules • Never allow children to use or be in the vicinity of the machine. • Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. • Never allow anyon...
Page 17 - Safety instructions after completing work
WORKING TECHNIQUES English – 17 • Always use both hands to hold the machine. Hold the machine at the side of your body. • Make sure that no clothes or parts of the body come in contact with the cutting equipment when it is activated. • When the motor is switched off, keep your hands and feet away fr...
Page 19 - MAINTENANCE; Inspection and maintenance; Cleaning; Cleaning and lubrication
MAINTENANCE English – 19 Inspection and maintenance All servicing and repair work on the machine requires special training. This is especially true of the machine ′ s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of ou...
Page 20 - Troubleshooting schedule
20 – English MAINTENANCE Troubleshooting schedule Control panel Troubleshooting takes place from the keypad. Troubleshooting the battery and/or the battery charger during charging. Battery Battery charger LED display Possible faults Possible action Green activate LED fl ashing. Low battery voltage. ...
Page 21 - Maintenance schedule
English – 21 MAINTENANCE Maintenance schedule The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More ex...
Page 22 - TECHNICAL DATA; Technical data
22 – English TECHNICAL DATA Technical data Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EC directive 2000/14/ EC. The differnce between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement ...
Page 23 - EC Declaration of Conformity (Applies to Europe only)
English – 23 TECHNICAL DATA EC Declaration of Conformity (Applies to Europe only) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 536LiHD60X, 536LiHD70X from 2013’s serial numbers and onwards (the year is clearly sta...
