Hunter 42775-01 - Manual

Table of Contents:

• Page 2 – ceiling fan is an addition to your home or office that; Cautions and Warnings; qualified electrician.; Welc om e; Table Of Contents
• Page 3 – Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; of three ways, depending on ceiling height and your preference: Low; Considering Optional Accessories; performance of your Hunter fan, use only Hunter speed controls.; Standard Mounting; Low Profile Mounting; To
• Page 4 – Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady
• Page 5 – To avoid possible electrical shock, before installing your fan,; outermost holes in the outlet box. The pilot holes should be 9/64”; Note: The isolators must be flush against the ceiling. A loose; -5. Place a flat washer on each of the two 3” wood screws and pass; • Inst al lin g th e C ei lin g Pl at e
• Page 6 – Note: Your Hunter fan comes with an optional downrod extension; Fan may fall if not assembled as directed in these; For Standard or Angled mounting:; The adapter has a special coating on the threads. Do; -4. Raise the fan and place the hook on the ceiling plate through the; • A ssemblin g and Han g in g th e Fan
• Page 7 – For low profile mounting, the downrod is replaced with; system is designed for downrods
• Page 8 – fsdfsdf; Dual Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black wire; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; Be sure no bare wires or wire strands are visible after; ceiling plate into the outlet box.; Single Switch Wiring; • Wirin g th e Fan
• Page 9 – • Inst al lin g th e C anopy and C anopy Trim Rin g
• Page 10 – • A ssemblin g th e Bl ade s
• Page 11 – If you are using one of the enclosed downrods; for you to activate the Perfect Balance; system by removing the; If you are using a downrod longer than 6 inches; • Activatin g Per fe ct Bal ance
• Page 12 – an optional switch housing cap and plug button. This feature gives; WARNING: Use only the light fixture supplied with this fan model.; assembly screws into the switch housing mounting plate.; Make sure the upper switch housing is securely; If you do not want to install the light fixture
• Page 13 – -6. To attach the lower switch housing, connect the upper plug
• Page 14 – Installing the Glass Bowl; -14. Place the cover plate up against the
• Page 15 – Uninstalling the Light Fixture; between the black wire and the black/white wire.
• Page 16 – In warm weather; In cold weather; scratching. A vacuum cleaner brush nozzle can remove heavier dust.; To Change Airflow Direction; • O p eratin g and Cleanin g Your C ei lin g Fan
• Page 17 – 0 • Trouble sho otin g
• Page 18 – See the Installation and Operation Manual