Hunter 42775-01 - Manuals

Hunter 42775-01 – Manual in PDF format online.

Manuals:

Manual

Manual Hunter 42775-01

Summary

Page 2 - ceiling fan is an addition to your home or office that; Cautions and Warnings; qualified electrician.; Welc om e; Table Of Contents

2 42775-01 • 04/29/08 • Hunter Fan Company © 2007 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; of three ways, depending on ceiling height and your preference: Low; Considering Optional Accessories; performance of your Hunter fan, use only Hunter speed controls.; Standard Mounting; Low Profile Mounting; To

3 42775-01 • 04/29/08 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 4 - Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

4 42775-01 • 04/29/08 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 5 - To avoid possible electrical shock, before installing your fan,; outermost holes in the outlet box. The pilot holes should be 9/64”; Note: The isolators must be flush against the ceiling. A loose; -5. Place a flat washer on each of the two 3” wood screws and pass; • Inst al lin g th e C ei lin g Pl at e

5 42775-01 • 04/29/08 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 6 - Note: Your Hunter fan comes with an optional downrod extension; Fan may fall if not assembled as directed in these; For Standard or Angled mounting:; The adapter has a special coating on the threads. Do; -4. Raise the fan and place the hook on the ceiling plate through the; • A ssemblin g and Han g in g th e Fan

6 42775-01 • 04/29/08 • Hunter Fan Company Steps 3-2 – 3-3 Downrod Canopy Trim Ring Set Screw 3-1. Unbundle the wires from the fan. Note: Your Hunter fan comes with an optional downrod extension pipe. If you are hanging the fan on a ceiling higher than 10 feet tall and you would like to use the encl...

Page 7 - For low profile mounting, the downrod is replaced with; system is designed for downrods

7 42775-01 • 04/29/08 • Hunter Fan Company 3 • A ssemblin g and Han g in g th e Fan U-shaped Hole Step 3-7 Steps 3-5 – 3-6 Low Profile Washer For Low Profile mounting:Note: For low profile mounting, the downrod is replaced with the low profile washer. 3-5. Remove the set screw from the adapter. 3-6....

Page 8 - fsdfsdf; Dual Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black wire; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; Be sure no bare wires or wire strands are visible after; ceiling plate into the outlet box.; Single Switch Wiring; • Wirin g th e Fan

8 42775-01 • 04/29/08 • Hunter Fan Company fsdfsdf All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with na...

Page 9 - • Inst al lin g th e C anopy and C anopy Trim Rin g

9 42775-01 • 04/29/08 • Hunter Fan Company 5-1. Holding the canopy, raise the fan off the hook.5-2. Align the slots in the canopy with the tabs on the ceiling plate.5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the s...

Page 10 - • A ssemblin g th e Bl ade s

10 42775-01 • 04/29/08 • Hunter Fan Company Blade Assembly Screw Step 6-1 Grommet 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the ...

Page 11 - If you are using one of the enclosed downrods; for you to activate the Perfect Balance; system by removing the; If you are using a downrod longer than 6 inches; • Activatin g Per fe ct Bal ance

11 42775-01 • 04/29/08 • Hunter Fan Company Steps 7-1 – 7-2 7-1. If you are using one of the enclosed downrods , it is now time for you to activate the Perfect Balance TM system by removing the five red retaining screws. Rotate the blades slowly until one of the red retaining screws is visible throu...

Page 12 - an optional switch housing cap and plug button. This feature gives; WARNING: Use only the light fixture supplied with this fan model.; assembly screws into the switch housing mounting plate.; Make sure the upper switch housing is securely; If you do not want to install the light fixture

12 42775-01 • 04/29/08 • Hunter Fan Company Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or no...

Page 13 - -6. To attach the lower switch housing, connect the upper plug

13 42775-01 • 04/29/08 • Hunter Fan Company Lower Switch Housing Housing Assembly Screw Plug Connector Detail 8-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are pola...

Page 14 - Installing the Glass Bowl; -14. Place the cover plate up against the

14 42775-01 • 04/29/08 • Hunter Fan Company 8 • Completin g Your Inst al l ation With or Without a Bow l Li g ht Fi xture (Continu ed) Installing the Glass Bowl 8-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 8-9. If the fandangle is attached to the extra pull chain, remo...

Page 15 - Uninstalling the Light Fixture; between the black wire and the black/white wire.

15 42775-01 • 04/29/08 • Hunter Fan Company 8 • Completin g Your Inst al l ation With or Without a Bow l Li g ht Fi xture (Continu ed) Uninstalling the Light Fixture 8-17. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 8-18. Disc...

Page 16 - In warm weather; In cold weather; scratching. A vacuum cleaner brush nozzle can remove heavier dust.; To Change Airflow Direction; • O p eratin g and Cleanin g Your C ei lin g Fan

16 42775-01 • 04/29/08 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 9-1. Turn on electrical power to the fan.9-2. The first time the fan is turned on, let it run continuously and undisturbed for 10-15 minutes. The fan may wobble a...

Page 17 - 0 • Trouble sho otin g

17 42775-01 • 04/29/08 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...

Page 18 - See the Installation and Operation Manual

ATTENTION!NEW FEATURE! Your new Hunter fan features an innovative, new breakthrough in ceiling fan technology known as the Perfect Balance TM system. Perfect Balance TM is a mechanism designed by Hunter Fan Company to ensure your fan remains balanced and wobble-free. The blades will feel loose on th...