Hunter 59009 - Manuals - manualsarea.com

Page 2 - Welc om e; Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Table Of Contents

2 42221-01 • 06/04/12 • Hunter Fan Company © 2012 Hunter Fan Company Welc om e Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and opera...

Page 3 - Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site; Suitable Existing Fan Site; Pre parin g th e Fan Sit e

3 42221-01 • 06/04/12 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 42221-01 • 06/04/12 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 5 - Mountin g and O ptional Ac ce ss orie s; Understanding Mounting; Low Profile Mounting; To reduce the risk of

5 42221-01 • 06/04/12 • Hunter Fan Company Mountin g and O ptional Ac ce ss orie s Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and cannot be used on ceilings less than 8 feet high...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 42221-01 • 06/04/12 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - To avoid possible electrical shock, before installing your fan,; -2 Your fan comes with four preinstalled noise isolators. Check to

7 42221-01 • 06/04/12 • Hunter Fan Company 2 • Inst al lin g th e C ei lin g Pl at e 7 2 • Inst al lin g th e C ei lin g Pl at e CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall swi...

Page 8 - • A ssemblin g and Han g in g th e Fan; Installing the Top Housing:; To hang the fan, you must tilt the canopy to an

8 42221-01 • 06/04/12 • Hunter Fan Company 3 • A ssemblin g and Han g in g th e Fan Installing the Top Housing: 3-1. Place the top housing onto the motor housing so that the holes in the top housing lineup with the holes in the motor housing. 3-2. Rest the trim ring on the top housing. 3-4. Place th...

Page 9 - Dual Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black wire; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; Be sure no bare wire or wire strands are visible after; ceiling plate into the outlet box.; • Wirin g th e Fan

9 42221-01 • 06/04/12 • Hunter Fan Company 9 Dual Switch Wiring Single Switch Wiring Wire Connector All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an ac...

Page 10 - • Inst al lin g th e C anopy; Failure to complete the following steps could cause the; It is recommended you use a magnetic tip screwdriver for the; The slots in the canopy must remain engaged while; the canopy. The canopy trim ring will snap and lock into place.

10 42221-01 • 06/04/12 • Hunter Fan Company 5 • Inst al lin g th e C anopy Canopy Screw Canopy Canopy Step 5-1 Step 5-3 Step 5-4 WARNING: Failure to complete the following steps could cause the fan to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. 5-1. Swin...

Page 11 - • A ssemblin g th e Bl ade s; Attaching Blade to Blade Iron:; -1. With a Phillips head screwdriver, attach each blade to a; Attaching Blade Assembly to Motor Assembly:; -2. For each blade, insert one blade armature screw through the

11 42221-01 • 06/04/12 • Hunter Fan Company 11 6 • A ssemblin g th e Bl ade s Attaching Blade to Blade Iron: 6-1. With a Phillips head screwdriver, attach each blade to a blade iron using three blade assembly screws and three barrel nuts. Be sure that the blade iron is oriented as shown. Attaching B...

Page 12 - • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture

12 42221-01 • 06/04/12 • Hunter Fan Company Steps 7-1 – 7-4 Step 7-5 Switch Housing Screw Switch Housing Screw Upper Switch Housing Mounting Plate WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two switch housing screws in...

Page 13 - Attaching the pull chain pendants:; up with the tabs on the inside surface of the light fixture rim.

13 42221-01 • 06/04/12 • Hunter Fan Company Step 7-9 Step 7-9 Steps 7-12 – 7-14 7 • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture (c ontinu ed) Connector Step 7-10 Step 7-11 7-9. Install E-26 60 watt light bulb. When necessary, replace with bulb of the same wattage. Note: The revers...

Page 14 - In warm weather; In cold weather; • The chain uses a breakaway connector that separates if the; • O p eratin g and Cleanin g Your C ei lin g Fan; To Change Airflow Direction

14 42221-01 • 06/04/12 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1. Turn on electrical power to the fan.8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Of...

Page 15 - instructions provided.; • Trouble sho otin g

15 42221-01 • 06/04/12 • Hunter Fan Company Problem: Nothing happens; fan does not move 1. Turn power on, replace fuse, or reset breaker.2. Pull the pull chain to ensure it is on. 3. Loosen canopy, check all connections according to the wiring the fan section.4. Check the plug connection in the swit...