Hunter 42656-01 - Manual

Table of Contents:

• Page 2 – Welcome; ceiling fan is an addition to your home or office that; Cautions and Warnings; qualified electrician.; Table of Contents
• Page 3 – Inst al ler’s Choice and O ptional Ac ce ss orie s; Standard Mounting; Understanding Mounting and Installer’s Choice; of three ways, depending on ceiling height and your preference: Low; Considering Optional Accessories; performance of your Hunter fan, use only Hunter speed controls.
• Page 4 – • Gettin g R eady; To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?
• Page 5 – • Inst al lin g th e C ei lin g Pl at e; To avoid possible electrical shock, before installing your fan,; outermost holes in the outlet box. The pilot holes should be 9/64”; For Angled Ceilings:
• Page 6 – • A ssemblin g th e Fan; Fan may fall if not assembled as directed in these; -2. Insert the downrod through the canopy and canopy trim ring.; • Hanging and Wiring the Fan; The adapter has a special coating on the threads. Do; Standard or Angled Mounting
• Page 7 – • Han g in g and Wirin g th e Fan; Note: To hang the fan, you must tilt the canopy to an almost vertical; position so that the canopy slots sit on the ceiling plate hooks.; location is still OFF.; Be sure no bare wire or wire strands are visible after; Single Switch Wiring:; If you want to, you can control both fan and light with one switch. To; Dual Switch Wiring:; • The bare or green ground wire from the ceiling to the green; Single Switch Wiring
• Page 8 – • Inst al lin g th e C anopy and C anopy Trim Rin g; Failure to complete the following steps could cause the fan; -1. Rotate the hanger ball so the tab in the canopy is secure in the; The slots in the canopy must remain engaged while; -3. Holding the canopy up with the screw holes aligned, partially
• Page 9 – • A ssemblin g th e Bl ade s; blade screws to attach the medallion to the blade iron. Repeat for
• Page 10 – Both plug connectors are polarized and will only fit together; • Inst al lin g th e Li g ht Fi xture; Note: In compliance with US federal energy regulations, this; ceiling fan contains a device that restricts the light kit to a
• Page 11 – cover plate and glass bowl.; • Inst al lin g th e Li g ht Fi xture (c ontinu ed)
• Page 12 – • O p eratin g and Cleanin g Your C ei lin g Fan; In warm weather; In cold weather; • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; Turn the fan off and let it come to a complete
• Page 13 – • Trouble sho otin g; Problem: Lights dim when turned on or do not turn on; Turn the power to the fan off at the wall switch. Wait 30