Human Touch PC-075/085/086/095 - Manual
Human Touch PC-075/085/086/095 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Air compressor
1
REPLACING THE RECLINE ACTUATOR
PC-075/085/086/095
1. Unplug the chair.
2. Gently place the chair on its left-hand side (Fig.1).
3. If you are working on a PC-086, use a Phillips-head screwdriver to remove the six screws that
attach the air compressor assembly to the chair base (Fig. 1) then detach the air compressor
assembly and set it aside (Fig.2).
4. Using a Phillips-head screwdriver, remove the four screws that secure the fabric flap located on
the underside of the chair (Fig.3).
REMOVE THE RECLINE ACTUATOR
March 13, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 3
Tools Required:
Phillips-head screwdriver, needle-nosed pliers, 3/16” (5mm) Allen wrench, nail clipper or other instrument suitable for cutting zip ties, new zip ties at least 6” long.
NOTE:
SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
(Fig.1)
Air compressor
(Fig.2)
(Fig.3)
1
PC-085/086
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
