Human Touch iJoy-2400 - Manual
Human Touch iJoy-2400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
REMOVING THE MAIN POWER PANEL
1. Power off the chair then unplug it.
2. Using a utility blade, peel the label off the main power panel, located on the left-hand side of the chair (Fig.1).
Note: Be sure to record the serial number that is printed on the power panel label before discarding it.
The serial number is required for warranty service.
3. Using a Phillips-head screwdriver, remove the two screws that secure the power panel to the chair (Fig.1).
4. Using a flat-head screwdriver, pry the panel out of the chair enough to expose the connectors, then disconnect
the connectors (Fig.2).
5. Remove the power panel from the chair (Fig.3).
Tools Required:
Phillips-head screwdriver, utility blade, flat-head screwdriver.
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
1
To ensure that Human Touch
®
products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
SERVICE LEVEL: 2
(Fig.2)
X1103
REPLACING THE MAIN POWER PANEL
Jan 04, 2010
iJoy-2400
Peel the label off
(Fig.1)
Power panel
Power panel
flat-head screwdriver
Connectors
(Fig.3)
Power panel removed
Power panel
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
