Human Touch HT-7450 - Manual
Human Touch HT-7450 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
REPLACING THE SEAT PAD MOUNTING CLIPS
HT-7450
Tools Required:
Phillips-head screwdrive
NOTE:
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 2
April 10, 2012
1. Standing next to the chair, insert a flat-head screwdriver between the seat cushion and the chair frame, then pull up on the
screwdriver to pry the seat clip away from the chair frame (Fig.1).
2. Repeat step 1 on the opposite side of the chair.
(Fig.1)
Back seat clips (2)
Front seat clips (2)
Seat pad
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
