Human Touch HT-275 - Manual
Human Touch HT-275 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
REMOVING THE SEAT CUSHION
1. Raise the footrest deployment handle to deploy the footrest (Fig.1).
2. Power off the chair, then unplug it.
3. Use your fingers to pop off the right-hand side panel (Fig.2).
4. Using a Phillips-head screwdriver, remove the screw from the underside of the right-hand armrest screw (Fig.3).
5. From underneath the chair, use a 16mm open wrench or socket wrench to remove the armrest bolt (Fig.4).
Tools Required:
Phillips-head screwdriver, small flat-head screwdriver, 16mm open wrench or socket wrench, two people.
NOTE:
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
REPLACING THE SEAT CUSHION
April 25, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 3
HT-270 / HT-275
1
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
Right-hand side panel
Seat cushion
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
