Human Touch HT-2580/iJoy-2580 - Manual
Human Touch HT-2580/iJoy-2580 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
replacing THe BacKreST acTUaTOr
REMOVING THE RECLINE ACTUATOR
1. Power off the chair then unplug it.
2. Gently tip the chair forward to rest the headrest on the floor (Fig.1).
3. Using an instrument suitable for cutting zip ties, cut the zip tie that secures the two zippers on the bottom of the chair,
then open both zippers (Fig.2).
4. Using an instrument suitable for cutting zip ties, cut the zip ties that secure the cable bundle.
5. Follow the cable harness from the actuator to the cable bundle, then disconnect the two backrest actuator connectors (Fig.3).
Tools Required:
needle-nosed pliers, Phillips-head screwdriver, 4-mm Allen Key, instrument suitable for cutting zip ties, new zip ties.
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
1
X1103
Aug 20, 2009
To ensure that Human Touch
®
products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
SERVICE LEVEL: 3
(Fig.1)
(Fig.2)
(Fig.3)
Seat
Actuator
Connectors
HT-2580/iJoy-2580
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
