Honeywell V4297S - Manual
Honeywell V4297S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ORDERING INFORMATION
- Page 5 – INSTALLATION; When Installing this product...; Mounting; WIRING; OPERATION AND CHECKOUT; Operation; WARNING
- Page 6 – Valve Leak Test; TROUBLESHOOTING; Troubleshooting Procedure; SERVICE INFORMATION; Scheduled Inspection and Maintenance
PRODUCT DATA
® U.S. Registered Trademark
Copyright © 1999 Honeywell Inc. • All Rights Reserved
V4297S
Normally Open Vent Valve
APPLICATION
The V4297S provides the vent function in a double block and
bleed configuration. The valve is part of the Honeywell
Integrated Valve Train System, which allows gas train
components to be directly bolted together.
FEATURES
•
Used with natural, manufactured, mixed or liquefied
petroleum (LP) gases.
•
V4297S valves are normally open valves to be used as
vent valves in double block and bleed
configurations. The gas flows through the vent
connection when the valve is not energized.
•
V4297S are used with 110/120Vac 50/60Hz
controllers.
•
Two valve body types (small and large)
applicable to seven pipe sizes:
Small body type for 3/4 in. (19 mm), 1 in. (25 mm),
1-1/4 in. (32 mm), 1-1/2 in. (38 mm) and
2 in. (51 mm) pipes.
Large body type for 2 in. (51 mm),
2-1/2 in. (64 mm) and 3 in. (76 mm) pipes.
•
Small body has a 1 in. NPT threaded vent connection.
Large body has a 1-1/4 in. NPT threaded vent
connection.
•
Two 1/4 in. NPT threaded pressure taps available for
the small body valve, three for the large body valve.
•
NEMA 1 enclosure standard.
•
V4297S is not gas flow direction dependent. It can be
connected either way in the valve train.
•
Unpainted die-cast aluminum body.
65-0244
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
V4297S NORMALLY OPEN VENT VALVE 65-0244 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to theTRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further informatio...
V4297S NORMALLY OPEN VENT VALVE 65-0244 5 INSTALLATION When Installing this product… 1. Read these instructions carefully. Be sure to follow Warning information carefully. 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for yourapplication. 3. I...
V4297S NORMALLY OPEN VENT VALVE 65-0244 6 Valve Leak Test This is a test for checking the closure tightness of the gasvalve. It should be performed only by trained, experienced,flame safeguard control technicians during the initial startupof the burner system, or whenever the valve is replaced. 1. E...
