Honeywell TS13C- User Manual
Honeywell TS13C– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FEATURES
- Page 3 – B. BATTERY COMPARTMENT; Holds two AA-size batteries; BEFORE YOU BEGIN; ALWAYS; before; RESET; before the; When the temperature falls below freezing, the batteries in
- Page 4 – BATTERY INSTALLATION; NOTE: Install the batteries select the channel and temperature in; LOW BATTERY WARNING
- Page 5 – SPECIFICATIONS; Dimensions
- Page 6 – The information above is not to be used as a contact for support or
- Page 7 – STANDARD WARRANTY INFORMATION
Honeywell
Temperature Sensor with LCD
(TS13C)
USER MANUAL
2
TABLE OF CONTENTS
INTRODUCTION
3
PRODUCT OVERVIEW
4
BEFORE YOU BEGIN
5
BATTERY INSTALLATION
7
LOW BATTERY WARNING
7
PLACEMENT OF THE REMOTE SENSOR
7
GETTING STARTED
8
TRANSMISSION COLLISION
9
PRECAUTIONS
9
SPECIFICATIONS
10
FCC STATEMENT
11
DECLARATION OF CONFORMITY
12
STANDARD WARRANTY INFORMATION
13
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell TS13C
Summary
3 3 INTRODUCTION Thank you for selecting the Honeywell Temperature Sensor with LCD. This device registers, display and transmits the temperature data from the remote location to the designated main unit (receiver). In this package you will find: • One remote sensor (transmitter) TS13C • One User Man...
5 5 B. BATTERY COMPARTMENT • Holds two AA-size batteries C. RESET • Resets all readings D. CHANNEL SWITCH • Selects the desired channel E. WALL-MOUNT RECESSED HOLE • Keeps the remote sensor on the wall F. °C/ °F SWITCH • Selects the temperature display in Celsius or Fahrenheit TS13C SENSOR IS COMPAT...
7 7 BATTERY INSTALLATION NOTE: Install the batteries; select the channel and temperature in C° or F° before mounting the remote sensor. • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel. The switch is located in the battery compartment. Channel 1 i...
