Honeywell Thermostat TH8000- User Manual

Honeywell Thermostat TH8000

Honeywell Thermostat TH8000– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 2 – Installation Guide; Wallplate installation; MERCURY NOTICE; Must be installed by a trained, experienced technician; can damage the product or cause a hazardous condition.
  • Page 3 – VisionPRO; Power options; Rc; Terminal Designations
  • Page 4 – Wiring guide—conventional systems; Wiring; Heat Only System
  • Page 5 – Wiring guide—heat pump systems
  • Page 6 – Remove tab and mount thermostat; Installer setup; DONE
  • Page 7 – Setup functions
  • Page 10 – TEST; Installer system test
  • Page 11 – Special functions; Please contact your distributor to order replacement parts.; Accessories & replacement parts
  • Page 12 – Automation and Control Solutions; Specifications; For assistance with this product please visit
  • Page 13 – Guía de; Tipos de sistemas
  • Page 14 – Guía de instalación; Instalación de la placa de montaje; AVISO DE MERCURIO; Debe instalarlo un técnico capacitado y con experiencia; producto o generarse condiciones de peligro.
  • Page 15 – Designaciones de terminales
  • Page 16 – Guía para el cableado—sistemas convencionales; Cableado; Sistema sólo calefacción
  • Page 17 – Guía para el cableado—sistemas de bombeo de calefacción
  • Page 18 – Retire la lengüeta y arme el termostato; Ajuste de fecha y hora
  • Page 19 – Función; Configuración del instalador
  • Page 22 – Prueba del sistema del instalador
  • Page 23 – Accesorios y piezas de recambio; Funciones especiales
  • Page 24 – Soluciones para automatización y control; Especificaciones
Loading the manual

VisionPRO

®

TH8000 Series

Touch-screen Programmable Thermostat

® U.S. Registered Trademark.

US Patent No. 6595430, D509151 and other patents pending.

Copyright © 2007 Honeywell International Inc.

All rights reserved.

Installation

Guide

69-1896ES-1

System Types

• Gas, oil, or electric heat with air

conditioning

• Warm air, hot water,

highefficiency furnaces, heat
pumps, steam, gravity

• Heat only — two-wire systems,

power to open and close
zone valves (Series 20), and
normallyopen zone valves

• Heat only with fan
• Cool only
• 750 mV heating systems

This manual covers the following models

• TH8110U: For 1 Heat/1 Cool systems
• TH8320U: For up to 3 Heat/2 Cool systems
• TH8321U: For up to 3 Heat/2 Cool systems with dehumidification
(Pull thermostat from wallplate and turn over to find model number)

Need Help?

For assistance with this product please visit

http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at

1-800-468-1502

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Installation Guide; Wallplate installation; MERCURY NOTICE; Must be installed by a trained, experienced technician; can damage the product or cause a hazardous condition.

Installation Guide Wallplate installation 1. Separate wallplate from thermostat.2. Mount wallplate as shown below. MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash. Contact your local waste management authority fo...

Page 3 - VisionPRO; Power options; Rc; Terminal Designations

VisionPRO TM TH8000 Series For 24VAC primary power, connect common side of transformer to “C” terminal. Insert supplied batteries for primary or backup power. Power options Push excess wire back into the wall opening. Plug wall opening with non-flammable insulation. Remove factory-installed jumper o...

Page 4 - Wiring guide—conventional systems; Wiring; Heat Only System

Installation Guide Wiring guide—conventional systems Wiring 1H/1C System (1 transformer) Rc Power [1] R [R+Rc joined by jumper] W Heat relay Y Compressor contactor G Fan relay C 24VAC common [3] S1 Optional outdoor/remote sensor S2 Optional outdoor/remote sensor Heat Only System Rc Power [1] R [R+Rc...

Other Honeywell Models