Honeywell TFE731-5-5AR- User Manual

Honeywell TFE731-5-5AR

Honeywell TFE731-5-5AR– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
Page: / 7
Loading the manual

LIGHT MAINTENANCE MANUAL

TFE731-5/-5AR/-5R (ATA NUMBER 72-02-75)

Page 303

Nov 11/05

72-00-00

E

Honeywell International Inc. Do not copy without express permission of Honeywell.

2.

Preservation

Table 302. Equipment and Materials

Equipment or Material

Manufacturer

NOTE:

Equivalent substitutes may be used for listed items.

Barrier material (MIL-PRF-121)

Commercially available

Barrier material (MIL-PRF-131, Type I, Class III)

Commercially available

Desiccant (MIL-D-3464, Type I)

Commercially available

Humidity indicator card (MX-56789)

AGM Container Controls Inc, P.O. Box 40020,
3526 E Fort Lowell, Tucson, AZ 85717-0020

Humidity indicator plug (Type II)

(SAE AS26860) or (HUM 2156)

Commercially available

Mineral base oil (Grade 1010) (MIL-PRF-6081)

(Alternate for Oil (Univolt 60 Preservative))

Commercially available

Oil (Univolt 60 Preservative)

Exxon Co, USA, P.O. Box 4803, 600 Jefferson St,
Houston, TX 77210-4803

Sealer (Metric Model HS-B)

Doboy Inc, 869 S Knowles Ave, New Richmond,
WI 54017-1745

A.

Installed Engine Preservation Instructions (Six Months or Less)

WARNING:

MOST PRESERVATIVE SOLUTIONS ARE FLAMMABLE AND
SHOULD NOT BE USED EXCESSIVELY NOR APPLIED TO A
HOT ENGINE. ALLOW ENGINE TO COOL FOR A MINIMUM OF
10 MINUTES BEFORE USING PRESERVATIVE MATERIAL ON
ANY PART OF THE ENGINE.

(1)

Allow engine to cool.

(2)

Inspect engine to assure that inlet area is clean and dry.

CAUTION:

AIRCRAFT INLET AND TAILPIPE PLUGS FOR ENGINE SHALL
BE INSTALLED PRIOR TO WASHING THE AIRCRAFT OR IF
AIRCRAFT IS TO BE PARKED UNSHELTERED WHEN NOT IN
SERVICE. TO MINIMIZE OR PREVENT CORROSION, WATER
OR CLEANING SOLUTION SHALL NOT BE PERMITTED TO
ENTER THE ENGINE INLET AREA.

(3)

Install inlet and tailpipe plugs.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Honeywell Models