Honeywell TE821W- Manual

6 • The remote thermo-hygrometer sensor should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions. • Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a grassy lawn). • Avoid placing the thermo-hygr...

9 H. BATTERY COVER Secures battery compartment on the anemometer base Assembly • Slide the wind cups on to the anemometer rotating shaft. Do not use force. • Insert the longer arm of the Allen Wrench (provided) into the wind cup set screw opening. Feel the head of the set screw inside the wind cups ...

10 Main Unit The main unit measures pressure, indoor temperature, humidity, and receives atomic time data from the US Atomic Clock and outdoor measurements from remote sensors. It should be placed indoors. FEATURES Time • Precise time and date set via RF signals from US Atomic clock • 12 or 24 hour ...

11 Placement tips • Make sure that the main unit is locating within the operating range of all remote sensors. • Ideally the remote sensors should be mounted within the line of sight of the main unit. • Transmission range may be affected by trees, metal structures and electronic appliances. • Test r...

14 Initial Set up 1. Power up each of the remotes as instructed in previous sections.( Remove clear protective plastic slips from the battery compartments) 2. Then power up the main display. 3. Once the main unit is powered, the display will briefly show all available LCD segments for a moment. 4. I...

16 • Press SET to confirm selection. • Press UP or DOWN to select the correct minute. • Press SET to confirm selection and to complete the initial programming for your weather station. After programming is completed, the display will return to the default Clock and Alarm Window. Note: If you do not ...

21 With Temperature and Humidity icon flashing, press the SET button to alternate between “temperature and relative humidity” or “dew point and relative humidity.” Temperature in Celsius or Fahrenheit With Temperature and Humidity icon flashing, press and hold the SET button to alternate between tem...

24 Resetting the Wind Statistics Memory With the wind icon flashing, press and hold MEMORY button to reset all wind statistics. Enabling or Disabling the Wind Alerts With the wind icon flashing, press the ALARM/CHART button to recall a current wind speed, a wind speed alert with the “ALARM HI” displ...

26 clock is programmed to search for the atomic time signal daily each hour between 1:00 am and 4:30 am. Once the time signal has been successfully received, the time and date will be updated automatically. To manually enable or disable the atomic time receiver: • Press and hold UP arrow button - if...

27 Maintenance Changing Batteries The battery status of each weather sensor is checked every hour. If the low battery indicator lights up, replace the batteries in the corresponding unit. Changing Batteries in the Main Unit • First connect the AC/DC adaptor provided to the main unit to avoid losing ...

28 Thermo-Hygrometer 15 minutes Anemometer (Wind Sensor): 15 minutes Rain Gauge (Rain Sensor) 30 minutes Check or replace the batteries for the corresponding sensor. Then press and hold DOWN arrow button on the main unit to search for all remote signals. If this does not work, check the wireless tra...

30 Specifications Radio Frequency: 433 MHz RF Reception range: 100-328 feet (30 -100 m) Barometric Pressure Measuring Range: 14.75 inHg to 32.44 inHg (500 Hpa to 1100Hpa); (374.5 mmHg to 823.8 mmHg) Resolution: 0.003 inHg (0.1 Hpa, 0.08 mmHg) Accuracy: 0.015 inHg (0.5 Hpa; 0.38 mmHg) Sampling interv...

32 Anemometer: 2 years Rain Gauge: 2 years Weight (without batteries) Main unit: 8.15oz (231g) Remote Thermo-Hygrometer: 2.29oz (65g) Remote Anemometer: 11.12oz (315g) Remote Rain gauge: 10.24oz (290g) Dimensions Main unit: 7.31 (L) x 5.39 (H) x 1.26 (D) inches / 185.8 (L) x 136.9 (H) x 32 (D) mm Re...

33 DECLARATION OF CONFORMITY Name: Meade Instruments Corp. Address: 27 Hubble, Irvine, CA 92618 Telephone No.: 1-949-451-1450 declare that the product Product No.: TE821W Product Name: Semi-Professional Weather Station Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88...