Page 2 - MISUSE OF DOCUMENTATION; • The information presented in this product sheet (or; WARNING; PERSONAL INJURY; DO NOT USE these products
2 www.honeywell.com/sensing Inside front cover ! WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE thisdocument as product installation information. • Complete installation, operation and maintenance information is prov...
Page 3 - CONTENTS; Page
1 www.honeywell.com/sensing CONTENTS Introduction - How to use this catalogue Page 2 EVN2000 Series Page Fast Install Limit Switches A recent addition to our range. Saves over 50 % in installationtime with a design that eliminates the need to gain access to theinside of the housing in order to conne...
Page 5 - INTRODUCTION; How to use this catalogue
3 www.honeywell.com/sensing INTRODUCTION How to use this catalogue For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These illustrate our capabilities while the specifications include allow easy differentiation between similar pro...
Page 6 - Blank page
Page 7 - MICRO SWITCH Brand products; LIMIT SWITCHES
5 www.honeywell.com/sensing Industrial ElectromechanicalLimit Switches Honeywell offers an advanced line of heavy duty limit switches and a wide selection of application-proven enclosed switches (precision snap-acting switches sealed in rugged metal housing). Sealed versions keep out moisture and ot...
Page 8 - Proper application of limit switches; Actuators
6 www.honeywell.com/sensing LIMIT SWITCHES Proper application of limit switches The following are guidelines for the correct application of Limit Switches. Never use the Limit Switch as a physical end stop. Mechanical damage or incorrect operation may occur if this is done. Always ensure that the me...
Page 9 - A Note on Degrees of Protection
7 www.honeywell.com/sensing LIMIT SWITCHES A Note on Degrees of Protection IP Classification The IEC 529 standard describes a system for classifying the degree of protection provided by the enclosures of electrical equipment. The level of protection given by the enclosure is indicated by the IP code...
Page 10 - GLOBAL LIMIT SWITCHES; OPTIONS
8 www.honeywell.com/sensing GLOBAL LIMIT SWITCHES EVN2000 SeriesEN 50047Global LimitSwitches The EVN2000 series limit switch is an innovative product which has been developed to address a needhighlighted by Original Equipment Manufacturers (OEM), where “Ease of Wiring” is required. With thenew desig...
Page 11 - Side rotary actuated switches; Roller lever; Roller lever, adjustable
9 www.honeywell.com/sensing VL SeriesGeneral Purpose CompactLimit Switches The new economical SZL-VL Series miniature type limit switches are speciallydesigned for applications of small mounting space. These miniature switchesare ideal for OEM machinery which requires a rugged and reliable limit swi...
Page 12 - Adjustable rod; Plunger actuated switches; Top pin plunger; Top roller plunger
10 www.honeywell.com/sensing VL SeriesSide rotary actuated switches (continued) Adjustable rod 7 .276 in depth mounting holes hexagonal holes .217 36.3±0.8 44.9 (Roller can be rotated and locked in any position through 360˚) M4 rod fastening plate screw with hexagonal holes Rod fastening plate 12.5 ...
Page 13 - Cross roller plunger; Wobble actuated switches; Plastic rod, coil spring; Coil spring
11 www.honeywell.com/sensing Plunger actuated switches (continued) Cross roller plunger .402 M3x6 cover screw 12.5 dia.x3.8stainless steel roller 2-M3x23 cover screw 21±0.2 28 56±0.3 38 14.8 7.5±0.2 15.1 25 20.4±0.3 .157 64 14 mounting holes 2-M5 (P=0.8) tapped7 .276 in depth mounting holes 2-M5 (P=...
Page 14 - Operating characteristics; Electrical ratings
12 www.honeywell.com/sensing GLS SeriesGlobal LimitSwitches GLOBAL LIMIT SWITCHES SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT EN50041 (GLA) EN50047 (GLC, GLD, GLE) 0,120 N m (1.10 lb in) 0,165 N m (1.50 lb in) GLE only 11.5˚ 8˚ EN50041 (GLA) EN50047 (GLC, GLD, GLE) 16,0 N (...
Page 15 - HEAD OPTIONS
13 www.honeywell.com/sensing GLA EN 50041Standard metal body Mechanical life: up to 15 million Sealing: IP 67, NEMA 1, 4, 12, 13 Operating temperature: -25 °C to 85 °C (-13 °F to 185 °F) Approvals: IEC/EN 60947-5-1 AC15 A300/A600 DC13 Q300 UL, CSA, CE Switching options: SPDT Single Pole, Double Thro...
Page 16 - Wobble, coil actuator; Side rotary
14 www.honeywell.com/sensing GLA EN 50041Standard metal body(continued) Wobble, coil actuator CONTACT CONDUIT REFERENCE SPDT ½ in NPT GLAA01E7B SPDT PG 13,5 GLAB01E7B DPDT PG 13,5 GLAB20E7B SPDT 20 mm GLAC01E7B DPDT 20 mm GLAC20E7B Coil wobble head, stainless steelspring actuator CONTACT CONDUIT REF...
Page 20 - COMPACT LIMIT SWITCHES
18 www.honeywell.com/sensing OPTIONS Top pin plunger 25,4(OP) CONTACT REFERENCE Silver SL1-H Gold clad cross point SL1-HK Top roller plunger, parallel 31,4 (OP) CONTACT REFERENCE Silver SL1-A Gold clad cross point SL1-AK SL1 SeriesCompact LimitSwitches The SL1 Series compact limit switches are seale...
Page 24 - Top roller plunger, perpendicular; Rotary motion
22 www.honeywell.com/sensing COMPACT LIMIT SWITCHES 14CE/914CE SeriesPlunger actuated switches(continued) Top roller plunger, perpendicular Ø 12,4 (0.49) OP 28,5 (1.12) 5,1 (0.20) NORTH AMERICA/GLOBAL REFERENCE 3 ft cable, bottom exit 914CE3-3 6 ft cable, bottom exit 914CE3-6 6 ft cable, side exit 9...
Page 27 - Europe; Europe
25 www.honeywell.com/sensing Top roller plunger, parallel,boot sealed 36,1 max. ø12,4 North America/Global CABLE LENGTH CONTACT OPTION REFERENCE 3 ft 1NC, BBM 924CE31-S6 20 ft 1NC 924CE31- Y203 ft 1NC low temperature 924CE31- Y3L1 Europe CABLE LENGTH CONTACT OPTION REFERENCE 1 m 1NC/1NO, BBM 24CE31-...
Page 30 - Fixed length lever
28 www.honeywell.com/sensing COMPACT LIMIT SWITCHES LS SeriesSide rotary actuated switches OPTIONS Fixed length lever Operating force max. (OF): Standard 13,3 N (3.0 lb) Low 5,0 N (18 oz) Pretravel max. (PT): Standard 20° Low 5° Overtravel min. (OT) 30° Differential travel max. (DT): Standard 12° Lo...
Page 31 - Maintained contact; Side rotary, yoke lever, maintained contact
29 www.honeywell.com/sensing No lever Note: Levers are ordered separately (see pages 69-71for details) Operating force max. (OF): Standard 0,51 N m (4.5 in lb) Low with standard PT 0,21 N m (30 in oz) Low with low PT 0,11 N m (1 in lb) Pretravel max. (PT): Standard 20° Low 5° Maintained contact 55° ...
Page 33 - Flexible cable
31 www.honeywell.com/sensing Wobble actuated switches These switches will operate by moving actuator in anydirection except direct pull. Operating force max. (OF): 1,39 N (5 oz) Pretravel max. (PT): 28,6 mm (1,125 in) Switching options: SPDT OPTIONS Flexible cable 141,0 ±2,54(5,550 ±0.10) Ø 4,80 ±0....
Page 34 - PRECISION LIMIT SWITCHES; Top roller arm, adjustable
32 www.honeywell.com/sensing BF SeriesPlasticEnclosed BasicSwitches PRECISION LIMIT SWITCHES BF Series Plastic Enclosed Basic Switches are available with a wide variety of actuators, and are designed for easymounting and wiring. BF switches are designed to allow mounting with the cover either toward...
Page 35 - Low force rod
33 www.honeywell.com/sensing PRECISION LIMIT SWITCHES Plunger actuated switches(continued) Top roller arm, adjustable, oneway 14,73 0.58 32,26 1.27 19,05 0.75 180˚ 58,72.31 73,52.89 35,11.38 Ø 15,5 0.61 44,51.75 73,62.90 9,5 0.38 4,90.19 17,50.69 39,6 1.56 18,30.72 Operating force max. (OF): Left 3,...
Page 37 - Momentary contact
35 www.honeywell.com/sensing E6/V6 E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/ seal cemented inside thebottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. All side mount swit...
Page 41 - E7 Metal standard enclosed switch
39 www.honeywell.com/sensing E7 Metal standard enclosed switch Mechanical life: 10 million Sealing: Without boot seal IP50 Standard With boot seal IP65 Sealed Operating temperature: -30 °C to 70 °C (-22 °F to 158 °F) Approvals: IEC 60947-5-1 EN 60947-5-1 Switching options: SPDT Single Pole, Double T...
Page 42 - With boot seal
40 www.honeywell.com/sensing PRECISION LIMIT SWITCHES BAF/DTFSeriesHigh CapacityEnclosedSwitches The BAF/DTF Series is available with or without boot seals. The elastomerboot on sealed actuator versions protects the actuating mechanism and theinternal basic switch from contamination. They are theref...
Page 45 - With boot seals on wobble stick and plunger
43 www.honeywell.com/sensing Wobble, coil spring 82,6 (3.25) 41,4 (1.63) 27,4 (1.08) 27,4 (1.08) 158,5 (6.24) 32,5 (1.28) 20,6 (0.81) 101,6 (4.00) Ø 7,1 (0.28) Ø 6,9 (0.27) (3) 1/2-14 NPT Threads With boot seals on wobble stick and plunger Pretravel max. (PT): 15° ACTUATOR POSITION CONTACT ELECTRICA...
Page 46 - HEAVY DUTY LIMIT SWITCHES
44 www.honeywell.com/sensing HEAVY DUTY LIMIT SWITCHES HDLS SeriesHeavy Duty LimitSwitches The HDLS Series Heavy Duty Limit Switches offer a wide choice of mounting and actuator options.Housed in a rugged, die-cast zinc body which is epoxy coated for protection, they are perfectly suited tospecial a...
Page 47 - Operating temperatures
45 www.honeywell.com/sensing HEAVY DUTY LIMIT SWITCHES Operating temperatures Environmental seal performance
Page 48 - HDLS Series Side rotary actuated switches; Side rotary, momentary action
46 www.honeywell.com/sensing HDLS Series Side rotary actuated switches Levers: Levers for side rotary types are ordered separately (see pages69-71 for details) Approvals: NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE Operating force (Newton meters, N m/in lb): LSA, LSL, LSM, LSM, LSP, LSU 0,45 N m max...
Page 50 - Maintained contact, 2 position; Top plungers, momentary action
48 www.honeywell.com/sensing HDLS SeriesSide rotary actuatedswitches (continued) Maintained contact, 2 position Operation is maintained on counterclockwiserotation, reset on clockwise rotation and viceversa. Pretravel: 65° max. Differential travel: 40° max. Overtravel: 20° min. Switching options: SP...
Page 51 - Side plungers, momentary action; Side pin plunger
49 www.honeywell.com/sensing Side plungers, momentary action Pretravel: 2,54 mm (0.100 in) max. Differential travel: SPDT 0,64 mm (0.025 in) max. DPDT 0,89 mm (0.035 in) max. Overtravel: 4,83 mm (0.19 in) min. Operating force: 26,7 N m (6 lb) max. OPTIONS Side pin plunger Operating point: 33 mm ± 0,...
Page 52 - Plastic rod
50 www.honeywell.com/sensing HDLS SeriesWobble actuated switches Momentary action wobble actuated switches haveflexible levers which may be operated with anymovement, except direct pull. Approvals: NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE Conduit: ½ in - 14 NPT Contacts: Electrical ratings A, B S...
Page 53 - Fully potted HDLS; Standard; ° Pretravel
51 www.honeywell.com/sensing Fully potted HDLS Fully potted HDLS are designed to meet thedemanding requirements of NEMA 1, 3, 4, 6, 6Pand 13 for wet applications where the integrity ofthe conduit seal must be assured. These switchesare the same as the standard HDLS non plug inlimit switch except tha...
Page 57 - Explosion proof switches; EXPLOSION PROOF SWITCHES
55 www.honeywell.com/sensing Explosion proof switches Honeywell explosion proof switches are designed specifically for use inhazardous locations. To comply with explosion proof requirements, the flamepath within the housing is designed to contain and cool the escaping hotgases that otherwise could c...
Page 58 - Boot sealed; Top roller plunger, parallel
56 www.honeywell.com/sensing Top pin plunger M4 ground screw 40,0 Max. 1,57 16,0 Max.0.63 25,01.00 59,02.32 31,41.24 15,7 OP0.62 1,8 PT0.07 49,0 Max.1.93 7,6 0.30 (2) Ø 5,1 (0.20)Mounting holes Ø 10,0 (0.39) Stainless steel plunger "L" CABLE LENGTH REFERENCE 1 m (3.3 ft) 14CE101-1 2 m (6.6 f...
Page 59 - Side rotary roller lever; GXE Series
57 www.honeywell.com/sensing GXE SeriesExplosion ProofLimit Switches The GXE Series explosion proof limit switches are designed specifically for use in hazardous applications.The GXE enclosure is fully potted and has sealing protection of IP66/67 as per IEC/EN 60529. The entireGXE Series complies wi...
Page 60 - No lever
58 www.honeywell.com/sensing EX SeriesStandardExplosionProofSwitches The EX Series features the smallest UL listed housings available for use inhazardous locations. Flame paths within the housing cool exploding gasesbelow the kindling temperature before they reach the explosive gasessurrounding the ...
Page 62 - Overtravel plunger actuated switches
60 www.honeywell.com/sensing EX SeriesSide rotary actuated switches (continued) Cross roller lever, rotated 90° Operating force max. (OF): 2,22 N to 5,56 N (0.5 lb to 1.25 lb) Pretravel max. (PT): 5,56 mm (0.219 in) 8° Overtravel max. (OT 90° Differential travel max. (DT): 0,18 mm (0.007 in) 0.25° C...
Page 63 - Manually actuated
61 www.honeywell.com/sensing Boot sealed Operating force max. (OF): Electrical rating D 13,34 N (3.0 lb) Electrical rating B 15,57 N (3.5 lb) Pretravel max. (PT): Electrical rating D 1,98 mm (0.078 in) Electrical rating B 2,77 mm (0.109 in) Overtravel min. (OT): Electrical rating D 4,78 mm (0.188 in...
Page 64 - Analog position sensing specifications (Electrical rating “G”)
62 www.honeywell.com/sensing CX SeriesWeather SealedExplosion ProofSwitches CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous atmospheres.These enclosures are constructed to withstand the pressure of an internal explosion. O-ring seals make the enclosure weathe...
Page 65 - Analog output, 4 mA to 20 mA
63 www.honeywell.com/sensing Short housing Standard housing OPTIONS HOUSING BASIC CONTACT ELECTRICAL SHAFT RESTORING REFERENCE SIZE SWITCHES RATING FORCE TO CENTRE Short BZ (2) SPDT A With 11CX2 Short BZ (2) SPDT A Without 11CX12 Short BZ (2) SPDT A With 11CX2E Short BZ (2) SPDT A Without 11CX12E Sh...
Page 66 - Rotary actuated switches
64 www.honeywell.com/sensing LSX/BX SeriesWeather sealedexplosion proofswitches LSX/BX Series weather sealed, explosion proof limit switches are for use eitherindoor or outdoors in hazardous atmospheres. They are completely sealedand designed for use in explosive gas/dust environments. LSX/BX produc...
Page 71 - Levers; LEVERS
69 www.honeywell.com/sensing Levers Separate levers must be ordered with side rotarytypes. The table provides a cross referencebetween product families and the lever order/reference numbers. The following pages describethe levers. Illustrations are for reference only.Exact mounting drawings and dime...
Page 73 - NOTICE; Stainless steel levers
71 www.honeywell.com/sensing NOTICE ** Large rubber rollers and conveyor roller arm Because of the lever’s mass, the limit switch should bemounted with the lever facing down. This will enablegravity to help restore the switch to the free position. Flexible loop RADIUS/LENGTH REFERENCE Flexible loop ...
Page 74 - MY2 Series
72 www.honeywell.com/sensing MY2 Series OPTIONS Standard, PCB Terminal, DPDT 3,5 [0.14] 1,0 [0 .04] 3,3 [0 .1 3 ] 0, 5 [0 .02] 0,5 [0.02] Max. 36,0 [1.42] 6,0 [0.24] Max. 21,5 [0.85] 6, 3 [0. 25] M a x. 28, 0 [1 .1 0 ] COIL INPUT VOLTAGE MAX. CONTACT RATING REFERENCE 110/120 Vac 250 Vac/5 amp SZR-MY...
Page 75 - POWER RELAYS; MY4 Series
73 www.honeywell.com/sensing POWER RELAYS Solder/Plug-In Terminal, 4PDT 14 - O 1.2 [0.05] x 3 Holes 0,5 [0.02] Max. 36,0 [1.42] 6,0 [0.24] Max. 21,5 [0.85] M ax . 28, 0 [1. 10 ] 6, 3 [0 .2 5] 0, 5 [0. 02] 2, 6 [0. 10 ] Standard COIL INPUT VOLTAGE MAX. CONTACT RATING REFERENCE 110/120 Vac 250 Vac/3 a...
Page 76 - SZR-LY Series Power Relay; LY2 Series
74 www.honeywell.com/sensing POWER RELAYS SZR-LY Series Power Relay SZR-LY Series general-purpose power relays are designed for a wide range ofapplications including power, as well as logic control, for factory machinesand control panels. SZR-LY Series relays break 10 A loads are ideal for control p...
Page 77 - LY4 Series
75 www.honeywell.com/sensing POWER RELAYS Solder/Plug-In Terminal, 4PDT 14 - O 3.0 Holes Max. 36,0 [1.42] 6,4 [0.25] 3,0 [0.12] 5,0 [0. 2 0] 0,5 [0.02 ] Max. 41,5 [1.63] M ax. 28 ,0 [1.1 0] Standard COIL INPUT VOLTAGE MAX. CONTACT RATING REFERENCE 110/120 Vac 250 Vac/10 amp SZR-LY4-1-AC110-120V 220 ...
Page 78 - MY2 Series Socket; MY4 Series Socket; LY2 Series Socket; LY4 Series Socket
76 www.honeywell.com/sensing 25,0 [0.99] 18,0 [0.70] 15,6 [0.61] 45 ,0 [1 .7 7 ] 35,2 [1.39] 3,9 [0.15] 6,0 [0.24] 4, 2 [0 .17] 62,0 [2.44 ] 30,0 [1.18] 26,0 [1.02] 3,0 [0.12] 62 ,0 ± 0,1 [2 .4 4 ± .004] 2 - O 4,5 [0.18] Holes 2-M3 or 2-M4 Max . 61,0 [2.40] 26,0 [1.02] MY2 Series Socket TYPE POLES R...
Page 79 - SAFETY SWITCHES; Protective Guarding; Cable Pull Switches
77 www.honeywell.com/sensing SAFETY SWITCHES Electromechanical SafetySwitches Honeywell is a worldwide leader in advanced switching and sensing technology - especially in the area of industrial safety. We offer both electromechanical safety switches and electronic safety sensors as well as safety co...
Page 81 - KEY STYLE; Straight key
79 www.honeywell.com/sensing SAFETY SWITCHES OPTIONS Side exit cable CABLE LENGTH CONTACT REFERENCE 1 m 2NC, low energy GKMA17 1 m 1NC/1NO, BBM, low energy GKMA19 2 m 1NC/1NO, BBM GKMA23 2 m 2NC GKMA26 2 m 2NC, low energy GKMA27 2 m 1NC/1NO, BBM, low energy GKMA29 3 m 1NC/1NO, BBM GKMA33 3 m 2NC GKM...
Page 83 - ACTUATED SWITCHES
81 www.honeywell.com/sensing GSC Metal bodyGSD Plastic bodyEN 50047Safety Standard 24,75 / 0.97 14,5 / 0.57 30 / 1.18 conduitthread ø 23 / ø 0.9 19,8 / 0.78 22 / 0.87 20 / 0.78 3 / 0.12 2,15 / 0.08 R 55 / 2.16 30,5 / 1.20 3,5 / 0.138 Mechanical life: up to 1 million Sealing: IP 66, NEMA 1, 4 (GSC), ...
Page 86 - Head orientation
84 www.honeywell.com/sensing Head orientation OPTIONS Opening to front and top 9 /0.35 Standard CONDUIT CONTACT KEY REFERENCE 1/2 NPT 1NC/1NO 90° GKBA1L7 1/2 NPT 1NC/1NO Up-down GKBA1L8-F11* 1/2 NPT 1NC/1NO None GKBA1LX 1/2 NPT 4NC 90° GKBA10L7 1/2 NPT 2NC/2NO, BBM Straight GKBA14L6 1/2 NPT 2NC/2NO,...
Page 88 - Opening to front and top
86 www.honeywell.com/sensing GKL/GKR Series (continued) Key: Type 6 Straight Type 9 Side - side, spring loaded Type X No key Latching mechanism: Type A Mechanical (solenoid unlock with screwdriver) Type B Mechanical (without override) Type S Electrical (solenoid unlock with screwdriver) Solenoid vol...
Page 89 - Opening to right and top
87 www.honeywell.com/sensing SAFETY SWITCHES Opening to right and top 12 / 0.47 Right 1/2 in - NPT buna-n seals CONTACT KEY LATCHING SOLENOID REFERENCE TYPE TYPE VOLTAGE 3 (1NC/1NO, BBM) None A 24 Vdc GKRE3MXA2 3 (1NC/1NO, BBM) None A 120 Vac GKRE3MXA4 3 (1NC/1NO, BBM) None S 24 Vdc GKRE3MXS2 3 (1NC...
Page 92 - Cable maintained
90 www.honeywell.com/sensing CPS Series (continued) OPTIONS Cable maintained 1/2 in NPT CONTACT INDICATOR REFERENCE 1NC/1NO None 1CPSA1 1NC/1NO 24 V 1CPSA1A 1NC/1NO 120 V 1CPSA1B 2NC/2NO None 1CPSA2 2NC/2NO 24 V 1CPSA2A 2NC/2NO 120 V 1CPSA2B 3NC/1NO None 1CPSA3 3NC/1NO 24 V 1CPSA3A 3NC/1NO 120 V 1CP...
Page 93 - Cable maintained both sides; No actuation right side, cable maintained left side
91 www.honeywell.com/sensing SAFETY SWITCHES Cable maintained both sides 1/2 in NPT CONTACT CONTACT BLOCK INDICATOR REFERENCE MOUNTING 2NC/2NO 1 None 2CPSA1A1 2NC/2NO 1 24 Vdc 2CPSA1A1A 2NC/2NO 1 120 Vac 2CPSA1A1B 3NC/1NO 1 None 2CPSA1B1 3NC/1NO 1 24 Vdc 2CPSA1B1A 3NC/1NO 1 120 Vac 2CPSA1B1B 2NC/2NO...
Page 95 - LINEAR AND ROTARY POSITION; Linear and Rotary Position
93 www.honeywell.com/sensing LINEAR AND ROTARY POSITION Linear and Rotary Position Position sensors respond to the movement or location of a target, such as a molding press slide or a pulley shaft, by producing either a digital or an analogue output correlated to its location. Honeywell position sen...
Page 96 - Water resistant
94 www.honeywell.com/sensing LINEAR AND ROTARY POSITION LFII SeriesLongfellow II linear position transducer The new Longfellow II incorporates design innovations to increase transducerlife and provide greater resistance to vibration, while providing a smooth high-quality signal for demanding factory...
Page 97 - Water resistant - Binder
95 www.honeywell.com/sensing LINEAR AND ROTARY POSITION LFII Metric SeriesLongfellow II linear position transducer 2 1 3 34,5 (1.36) 19,00 (0.25) Dimensions in mm (inches) 11,11 (0.48) Across flats 47,8 (1.88) 50,8 (2.0) 42,7 (1.68) 21,3 (0.84) 12,7 (0.50) 6,4 (0.25) 4,1 (0.16) 3,962 x 7,925 Slot(0....
Page 103 - AQLT Series; AQMLT Series
101 www.honeywell.com/sensing LINEAR AND ROTARY POSITION AQLT/AQMLT SeriesShaftless, waterproof linear positiontransducer The AQLT and AQMLT are shaftless waterproof linear potentiometers designedto operate in wet/washdown and in-tank environments. The AQ series features an external actuator magneti...
Page 104 - Threaded bushing mount; Servo mount
102 www.honeywell.com/sensing LINEAR AND ROTARY POSITION M22 SeriesRotary position transducer The M22 rotary potentiometer, available in servo and bushing mount, utilizeswear-resistant MystR ® conductive plastic film combined with precious metal wipers to produce a quiet operating, low-noise, stable...
Page 107 - Clarostat Rotary Position Transducers
105 www.honeywell.com/sensing LINEAR AND ROTARY POSITION INDEX TH100 Series The TH-100 Series puts Honeywell’s proven variable-resistor technology towork in angle-management applications such as control-lever sensing andequipment position feedback. High performance and low cost make itattractive for...
Page 108 - 78 Series, Precision potentiometer; kOhm Resistance; 74 Series, Commercial potentiometer; Flatted Shaft; Clarostat Rotary Potentiometers and Position Transducers
106 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 578 Series, Precision potentiometer The 578 Series conductive plastic precision potentiometer puts Honeywell’sproven variable resistor technology to work in a high performance, cost-effective device. With its compact size, rugged construction ...
Page 109 - 90 Series, Commercial potentiometer; Slotted Shaft; 75 Series, Commercial potentiometer
107 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 590 Series, Commercial potentiometer The 590 Series conductive plastic modular potentiometer features lowelectrical noise, smooth feel, robust construction, and brass bushing andshaft. Terminals are PC style. Hardware included. Multiple sectio...
Page 110 - 80 Series, Industrial potentiometer
108 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 380 Series, Industrial potentiometer The 380 Series “Quiet One” is a 2-watt conductive plastic potentiometeroffering superior dynamic noise and a long rotational life. It meets MIL-R-94specifications where applicable. Approvals: MIL-R-94 Power...
Page 111 - RV4 MIL Series potentiometer; Locking Bushing
109 www.honeywell.com/sensing LINEAR AND ROTARY POSITION RV4 MIL Series potentiometer The RV4 is a dual-marked potentiometer with all the fine features of the380 Series in a more economical package. It is built in strict accordance withMIL-R-94. Approvals: MIL-R-94 Power rating: 2.0 W max. Element t...
Page 112 - RV6/392M MIL Series potentiometer
110 www.honeywell.com/sensing LINEAR AND ROTARY POSITION RV6/392M MIL Series potentiometer RV6/392M Series are economical potentiometers designed to meet wavesoldering applications for mounting PC boards. They meet flow solderabilityand washability test requirements, and MIL-R-94 standard apply. App...
Page 113 - 3 Series potentiometer; 85 Series, Commercial potentiometer; Linear taper
111 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 53 Series potentiometer The 53 Series has all the fine features of the Series 380 in a more economicalpackage. It is available with a 50,8 mm [2.0 in] long shaft. Power rating: 2.0 W max. Element type: Conductive plastic Terminal type: Solder ...
Page 114 - 10 Series , Mechanical; Brackets; Encoders
112 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 510 Series , Mechanical The 510 Series controls are manually operated, rotary, mechanical encodersthat provide a two-bit gray code for relative reference applications and a four-bit gray code for absolute electrical reference applications. The...
Page 115 - IR-transparent housing; PCB Mount; Slotted Optical Switches; OPTO SENSORS
113 www.honeywell.com/sensing LINEAR AND ROTARY POSITION S-510 Series The S-510 Series consists of a gallum arsenide IRED and siliconphototransitor mounted in a small injection-molded housing. An IR-opaquehousing is offered for applications where high levels of ambient infraredradiation may be prese...
Page 119 - ULTRASONIC DISTANCE SENSORS; Ultrasonic Distance Sensors
117 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS Ultrasonic Distance Sensors Ultrasonic sensing systems offer no-touch distance measurements to an accuracy of 1 mm through dust, smoke and vapour, in areas of high noise level, and with all types of target materials, shapes and colours, with ...
Page 121 - Retroreflective, PNP NO
119 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS The new 940/947 Series is microprocessor controlled, can be set up quickly and are fitted with epoxytransducers. All the housings are sealed to IP67. The retroreflective versions allow detection of any kindof target without any dead zone. The...
Page 126 - Accessories; Power supply
124 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS Accessories Due to regional agency approval requirements, some products may not be available in your area. Pleasecontact your regional Honeywell office regarding your choice of product. Power supply 24 Vdc regulated power supplywith output re...
Page 127 - M12 Connectors; Mounting Clamps
125 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS M12 Connectors OPTIONS WITHOUT CABLES M12 female, 5 pin, 5 screw terminals The 66195044-001 is used for the 940, 941, 944,947 series but may be used for any industrialsensor with standard M12 4 pin or 5 pinconnector. The 66195044-001 connecto...
Page 128 - Software
126 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS Accessories (continued)Programming OPTIONS Software The software package 55195101-101 containssoftware for programming 942 series separateand 55195101-102 for the 942 series compact .The software runs under Microsoft Windows™versions 95™ and ...
Page 129 - PRESSURE SENSORS; Pressure Sensors; Stainless Steel versions; High Purity versions
127 www.honeywell.com/sensing PRESSURE SENSORS Pressure Sensors Honeywell has over 40 years of experience in the pressure transducer industry. We offer three pressure sensor measurement types - absolute, differential and gage - including vacuum gage and bidirectional types. A wide variety of pressur...
Page 130 - BL Series
128 www.honeywell.com/sensing PRESSURE SENSORS AB/HP Series The AB-High Performance pressure transducer is extremely accurate down to0.25% span over a wide compensated temperature range. Both zero and full-scale temperature compensation are held to extremely narrow limits. The transducer’s body is m...
Page 131 - BX Series; Datamate Series
129 www.honeywell.com/sensing PRESSURE SENSORS BX Series The BX pressure sensor is intended for OEMs who need a small, highperformance pressure sensor. The unique sensor module design eliminatesthe need for oil-filled capsules and corrugated diaphragms providing a true,robust sensing surface for lon...
Page 132 - EA Series; Eclipse Series
130 www.honeywell.com/sensing PRESSURE SENSORS 25,0 (1.0) 25,0 (1.0) PSI: 1/8-27 NPT, 15,9 (0.625) Hex BAR: G 16,0 (0.25) Hex 76,0 (3.0) max. 38,0 (1.5) max. max. 2 4 3 1 2 3 Ground 4 Excitation Output EA Series The EA Series is designed for OEM users requiring high output and corrosion-resistance. ...
Page 133 - Model Cable
131 www.honeywell.com/sensing PRESSURE SENSORS 10,0 in. (0.375) max . PSI: 1/8-27 NPT, 16,0 (0.625) Hex 7/16 UNF, 14,0 (05625) Hex BAR: G1/4, 19,0 (0.75) Hex 3 Conductor, 24 AWG,Color Coded, ShieldedCable, 0,91 m (3 ft.) (1.875) 48,0 max. (1.0) max. 25,0 10,0 (0.375) max. (1.0) max 25,0 C Ground B O...
Page 134 - MediaMate Series
132 www.honeywell.com/sensing PRESSURE SENSORS MediaMate Series The MEDIAMATE pressure transducer provides the user with the corrosionresistance of stainless steel at low OEM pricing. It is fully compensated andcompletely interchangeable without further calibration. The MEDIAMATE’swetted parts and o...
Page 135 - SA Series; UL Approval; SR Series
133 www.honeywell.com/sensing PRESSURE SENSORS SA Series The harsh duty SA pressure transducer has a water resistant, stainless steelcase for complete protection from harsh environments. Internal hermeticsealing is used to provide measurement from absolute pressures (psia) orpressures referenced to ...
Page 136 - ML Series; ST Series
134 www.honeywell.com/sensing PRESSURE SENSORS ML Series The Model ML pressure transducers combines the latest in ASIC technologywith our proven stainless steel design. This digitally compensated transduceroffers an unparalleled value and performance combination making it the idealpressure sensing s...
Page 137 - 9 Vacuum Gauge Series - Flush Mount with Flange; Cell with Body Ring, 10 Vdc Excitation
135 www.honeywell.com/sensing PRESSURE SENSORS VENT HOLE (GAUGE UNITS ONLY) -OUT +OUT -IN +IN CERAMIC SHOWN (COMP. UNITS ONLY) Ø 16,98 (0.668) CKT CAVITY A 1 30,0 (1.22) 17,78 (0.70) 11,43 (0.45) .000 9,9 (0.39) 50,0 (2.0) NOMEX INSULATED STRIP CABLE W/ 2,54 (0.10) PIN SPACING (24 AWG EQUIV.) 4X 3,2...
Page 138 - cabl
136 www.honeywell.com/sensing PRESSURE SENSORS 13mm Series 1/8 in - 27 NPT50,0 mm (2.0 in) Nomex ribbon cable MEASUREMENT TYPE PRESSURE RANGE OUTPUT TYPE REFERENCE Absolute 0 psi to 5,000 psi 148 mV to 152 mV 13C5000PA4K Uncompensated SeriesPin Connector MEASUREMENT TYPE PRESSURE RANGE OUTPUT TYPE R...
Page 139 - SPT Series
137 www.honeywell.com/sensing PRESSURE SENSORS SPT Series The SPT stainless steel devices are designed for pressure applications thatinvolve measurement of hostile media in harsh environments and willaccommodate any media that will not adversely attack 304 or 316 stainlesssteel wetted parts. The SPT...
Page 140 - F1 Series; Tube stub ends; OPTIONAL
138 www.honeywell.com/sensing PRESSURE SENSORS F1 Series All F1 pressure transducers are manufactured in our Class 10 clean roomenvironment. Our flow-through pressure transducers are specificallydesigned for the semiconductor industry. Their long life, coupled with long-term stability, can greatly r...
Page 141 - S1 Series; Fitting Options
139 www.honeywell.com/sensing PRESSURE SENSORS OPTIONS VF 1/4 in Female Face SealBendix Male Connector MEASUREMENT TYPE PRESSURE RANGE REFERENCE Compound -14.7 psig to 100 psig S14VFV100CB VM 1/4 in Male Face SealBendix Male Connector MEASUREMENT TYPE PRESSURE RANGE REFERENCE Compound -14.7 psig to ...
Page 142 - TLD Series; Single Port/Output Signal 4 mA to 20 mA; Flow-through display orientation and transducer location
140 www.honeywell.com/sensing PRESSURE SENSORS TLD Series OPTIONS Flow-through/Output Signal 4 mA to 20 mA MEASUREMENT TYPE PRESSURE RANGE CONNECTIONS REFERENCE Compound -14.7 psig to 100 psig 1/4 in. OD 0.035 in. wall, 1/4 in long tube stub TLDF4CVT4V100CP Compound -14.7 psig to 100 psig 1/4 in. fe...
Page 143 - Single port display orientation and transducer location
141 www.honeywell.com/sensing PRESSURE SENSORS 6,4 0.25 4,570.18 47,01.85 11,20.44 24,10.95 75,22.96 56,92.24 11,20.44 24,10.95 81,53.21 38,11.50 z s 38,11.50 100,9 3.97 42,71.68 CABLE2 COND1,8 m (6 ft) CABLE2 COND1,8 m (6 ft) z s 38,11.50 38,11.50 35,91.42 26,11.03 Single port display orientation a...
Page 144 - Bonded Element Series
142 www.honeywell.com/sensing PRESSURE SENSORS COMMON V out +V 0,95 [0.04] 0.43 [0.015] GT 150 SERIES - 3 PIN 1,37 [0.05] 7/16-20UNF GLAND PER MS33656(3-904 O-RING SEALNOT PROVIDED) STAINLESS STEEL OR PLATED CRS HOUSING COMMON V out +V 0,95 [0.04] 0,60 [0.02] 1,37 [0.05] 1/4-18NPT PLATED CRS HOUSING...
Page 146 - SENSING AND CONTROL PRODUCTS
2 www.honeywell.com/sensing INTRODUCTION Relays General-purpose power relays and relay sockets designed for a wide range of applications that require stability and reliability. Resolvers Absolute position sensors which provides high angular accuracy, high resolution and repeatability under severe en...
Page 147 - Sales and Service; ASIA PACIFIC; Inside back cover
3 www.honeywell.com/sensing Sales and Service Honeywell serves its customers through a worldwide network of sales offices,representatives and distributors. For application assistance, currentspecifications, pricing or name of the nearest Authorised Distributor or SalesRepresentative, contact your lo...
Page 148 - Sensing and Control; YOUR HONEYWELL CONTACT:
Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defectivematerial and faulty workmanship. Contact your local sales office for warrantyinformation. If warranted goods are returned to Honeywell during that periodof coverage, Honeywell will repair or replace without charge ...
