Page 2 - ii; Installation is Easy
69-2206EF—01 ii Installation is Easy Label wires and remove your old thermostat Install and wire your new thermostat Set your new thermostat to match your heating/cooling system – This thermostat works with virtually all System Types – It is preset for the most common system We are here to help. Cal...
Page 4 - Remove Old Thermostat; Old thermostat
69-2206EF—01 2 Remove old thermostat but leave wallplate with wires attached. 2 Remove Old Thermostat M28099 Is there a sealed tube containing mercury? If so, see back cover for proper disposal instructions. Leave wallplate in place Old thermostat Cover
Page 5 - Label Wires with Tags; Wire Labels
69-2206EF—01 Label the wires using the supplied wire labels as you disconnect them. 3 Label Wires with Tags Wire Labels M28100 M28093
Page 6 - Wallplate
69-2206EF—01 Remove wallplate from the new thermostat and mount onto wall. M28073 4 Separate Wallplate from New Thermostat Wallplate
Page 7 - Mount Wallplate
69-2206EF—01 Mount the new wallplate using the included screws and anchors. 5 Mount Wallplate M28094 Drill 3/16-in. holes for drywallDrill 3/32-in. holes for plaster
Page 8 - Rc; Connect Wires; Have a Heat Pump system?
69-2206EF—01 6 Simply match wire labels. Remove metal jumper if you have both R and Rc wires. M28070 W2 Y2 C G Y W RC R LABELED WIRES SCREW CONVENTIONAL INSERT WIRES THEN TIGHTEN SCREWS WIRE HOLE Y G R W CONVENTIONAL 6 Connect Wires Labels don’t match? See page 21. Have a Heat Pump system? See pages...
Page 9 - Install Batteries
69-2206EF—01 Install two AA alkaline batteries and remove tab. M28101 Back of thermostat 7 Install Batteries M27518 Remove tab.
Page 10 - Install thermostat onto the wallplate on the wall.; Install Thermostat onto Wallplate
69-2206EF—01 Install thermostat onto the wallplate on the wall. 8 Install Thermostat onto Wallplate M27519
Page 11 - Turn the power back on to the heating/cooling system.; Turn Power Back On
9 69-2206EF—01 Turn the power back on to the heating/cooling system. 9 Turn Power Back On M28098
Page 12 - Set Time and Date
69-2206EF—01 10 10 Set Time and Date Press s or t to set month, then press NEXT. Press s or t to set day, then press NEXT. Press s or t to set year, then press DONE. Press s or t to set time, then press DONE to save and exit. Go Back Next Done 6 15 2006 M27520 Done M27521 10:10 Month Year Day
Page 13 - on next page to match your thermostat to your sys-
11 69-2206EF—01 If your system type is: q Single Stage Heat and Cool Congratulations, you’re done! If your system type is: q Multistage Heat and Cool q Heat Pump* without Backup Heat q Heat Pump* with Backup Heat q Heat Only q Cool Only Continue with advanced installation on next page to match your ...
Page 14 - Advanced Installation
Advanced Installation System setup ......................................................................13Wiring ..................................................................................21Troubleshooting ..................................................................24Customer assistanc...
Page 15 - About your new thermostat; System setup
RTH600 1 69-2206EF—01 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING Step 1 Press System & Fan. Step 2 Press and hold the center key until the screen changes (approximately 5 seconds). System setup 20 0120 System & Fan Schedule Clock & More M27522 20 0120 System Fan D...
Page 16 - Advanced Installation Guide; s t; NEXT; Changing settings
Advanced Installation Guide 69-2206EF—01 1 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING 20 0120 Go Back Next Done M27524 Function Setting Press s t to change setting. NOTE: Some functions in the following pages may not appear due to previous selections made. Press NEXT to advan...
Page 17 - If you set the time and date as shown on; to function 0170 and go to; Function; Year Setting
RTH600 1 69-2206EF—01 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING NOTE: If you set the time and date as shown on page 10, press NEXT to function 0170 and go to page 16. See page 14 to navigate between functions. Function Settings & Options 0120 Year Setting (first two digi...
Page 18 - Select System
Advanced Installation Guide 69-2206EF—01 16 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING See page 14 to navigate between functions. Function Settings & Options 0170 Select System Type Press s / t to select your system type: 1 Heat/cool: Gas, oil or electric heating with cen...
Page 21 - Changeover
RTH600 19 69-2206EF—01 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING See page 14 to navigate between functions. Function Settings & Options 0300 Manual/Auto Changeover Press s / t to select manual or automatic changeover: 0 Manual changeover (Heat/Cool/ Off). 1 Automatic cha...
Page 22 - Press; DONE; to save and exit setup.
Advanced Installation Guide 69-2206EF—01 20 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING See page 14 to navigate between functions. Function Settings & Options 0500 Furnace Filter Change Reminder Press s / t to set the desired reminder interval: 0 Off (no reminder) 1 Remind...
Page 23 - Wiring—conventional system
RTH600 21 69-2206EF—01 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING Alternate wiring (conventional systems) If labels do not match terminals, connect wires as shown here (see notes, below). Remove metal jumper connecting R and Rc only if you must connect both R and Rc wires. If...
Page 24 - Connect wires: Heat Pump; Wiring—heat pump
Advanced Installation Guide 69-2206EF—01 22 About your new thermostat SETUP WIRING ASSIST ANCE TROUBLESHOOTING Connect wires: Heat Pump 1. Match each labeled wire with same letter on new thermostat. 2. Use a screwdriver to loosen screws, insert wires into hole, then tighten screws. 3. If E and Aux d...
Page 26 - Troubleshooting; If you have difficulty with your thermostat, please try; Display is blank
Advanced Installation Guide 69-2206EF—01 2 Troubleshooting SETUP WIRING ASSIST ANCE TROUBLESHOOTING If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank Make sure fresh AA alkaline batteries are properl...
Page 27 - SYSTEM
RTH600 2 69-2206EF—01 Troubleshooting SETUP WIRING ASSIST ANCE TROUBLESHOOTING Heating or cool-ing system does not respond Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature.Press SYSTEM to set system to Cool. Make sure the temperature is set lowe...
Page 28 - For assistance with this product, please visit; Customer assistance
Advanced Installation Guide 69-2206EF—01 26 SETUP WIRING ASSIST ANCE TROUBLESHOOTING For assistance with this product, please visit http://DIYthermostats.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 . Customer assistance
Page 29 - -year limited warranty
2 69-2206EF—01 Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be ...
Page 30 - Automation and Control Solutions; Do not place your old
Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://DIYthermostats.honeywell.com ® U.S. Registered Trademark. US Patent No. 6,595,430; 7,114,554; 7,274,972; 7,225,054 and other patents pending. © 2008 Honeywell International Inc. 69-2206EF— 01 M.S. 06-08 Automation a...
Page 31 - Thermostat programmable; Guide d’installation rapide
Série RTH7600 Thermostat programmable 69-2206EF-01 Guide d’installation rapide
Page 32 - L’installation est facile !; Nous sommes à votre
69-2206EF—01 ii L’installation est facile ! Étiquetage des fils et retrait de l’ancien thermostat Installation et raccordement du nouveau thermostat Configuration du nouveau thermostat pour correspondre à votre système de chauffage/ climatisation – Ce thermostat fonctionne avec pratiquement tous les...
Page 34 - Retirer l’ancien thermostat; Ancien thermostat
69-2206EF—01 2 Retirer l’ancien thermostat, mais laisser en place la plaque murale et les fils sans les détacher. 2 Retirer l’ancien thermostat M28099 Y a-t-il une ampoule contenant du mercure? Si c’est le cas, se reporter aux consignes figurant sur la couverture avant de ce livret pour connaître le...
Page 35 - Étiqueter les fils; Étiquettes de fils
69-2206EF—01 Étiqueter les fils à l’aide des étiquettes fournies à mesure que les fils sont débranchés. 3 Étiqueter les fils Étiquettes de fils M28100 M28093
Page 36 - Plaque de montage
69-2206EF—01 Retirer la plaque murale du nouveau thermostat et l’installer au mur. M28073 4 Séparer la plaque murale du nouveau thermostat Plaque de montage
Page 37 - Installer la plaque
69-2206EF—01 Installer la nouvelle plaque murale à l’aide des vis et des chevilles d’ancrage fournies. 5 Installer la plaque M28094 Percer des trous de 3/16 po si le mur est en placoplâtrePercer des trous de 3/32 po si le mur est en plâtre
Page 38 - Raccorder les fils; Les étiquettes ne correspondent pas?
69-2206EF—01 6 Il suffit ensuite de faire correspondre les fils avec les étiquettes. Retirer le cavalier en métal s’il y a à la fois les fils « R » et « Rc ». MF28070 W2 Y2 C G Y W RC R FILS ÉTIQUETÉS VIS CLASSIQUE INSÉRER LES FILS, PUIS SERRER LES VIS OUVERTURE POUR LES FILS Y G R W CLASSIQUE 6 Rac...
Page 39 - Dos du thermostat; Installer les piles
69-2206EF—01 Installer 2 piles alcalines AA à l’arrière du thermostat et retirer l’onglet. M28101 Dos du thermostat 7 Installer les piles M27518 Retirer l’onglet.
Page 40 - Installer le thermostat sur la plaque murale fixée au mur.; Fixer le thermostat à la plaque
69-2206EF—01 Installer le thermostat sur la plaque murale fixée au mur. 8 Fixer le thermostat à la plaque murale M27519
Page 42 - Régler l’heure et date
69-2206EF—01 10 10 Régler l’heure et date Appuyer sur s ou t pour régler le mois, puis appuyer sur NEXT. Appuyer sur s ou t pour régler la date, puis appuyer sur NEXT. Appuyer sur s ou t pour régler l’année, puis appuyer sur DONE. Appuyer sur s ou t pour régler l’heure puis appuyer sur DONE pour sau...
Page 43 - à la page suivante pour faire correspondre le; Si votre système est du type
11 69-2206EF—01 Si votre système est du type suivant : q Chauffage et refroidissement à un étage Félicitations, vous avez terminé! Si votre système est du type suivant : q Chauffage et refroidissement, multiétages q Thermopompe* sans chauffage d’appoint q Thermopompe* avec chauffage d’appoint q Chau...
Page 44 - Guide d’installation avancé
Guide d’installation avancé Modification des réglages .................................................13Câblage ...............................................................................21Dépannage .........................................................................24Assistance à la clien...
Page 45 - Étape 1; Modification des réglages
RTH600 1 69-2206EF—01 About your new thermostat RÉGLAGE WIRING ASSIST ANCE TROUBLESHOOTING Étape 1 Appuyer sur System & Fan. Étape 2 Appuyer sur la touche centrale jusqu’à ce que l’affichage change (environ 5 secondes). Modification des réglages 20 0120 System & Fan Schedule Clock & More...
Page 47 - Si l’heure et la date sont réglées; à la fonction 0170 et passer à la page 16.; Fonction; tion de l’année
RTH600 1 69-2206EF—01 RÉGLAGE WIRING ASSIST ANCE TROUBLESHOOTING REMARQUE : Si l’heure et la date sont réglées selon les directives à la page 10, appuyer NEXT à la fonction 0170 et passer à la page 16. Voir page 14 pour naviguer entre les différentes fonctions. Fonction Réglages et options 0120 Prog...
Page 48 - Type de
Guide d’installation avancé 69-2206EF—01 16 RÉGLAGE WIRING ASSIST ANCE TROUBLESHOOTING Modification des réglages Voir page 14 pour naviguer entre les différentes fonctions. Fonction Réglages et options 0170 Type de système Appuyer sur s / t pour choisir votre type de système : 1 Chauff./Clim. : Gaz,...
Page 52 - enregistrer les modifications et quitter le
Guide d’installation avancé 69-2206EF—01 20 RÉGLAGE WIRING ASSIST ANCE TROUBLESHOOTING Modification des réglages Voir page 14 pour naviguer entre les différentes fonctions. Fonction Réglages et options 0500 Rappel de changement du filtre du système de chauffage Appuyer sur s / t pour choisir l’inter...
Page 53 - Câblage—systèmes classiques
RTH600 21 69-2206EF—01 SETUP CÂBLAGE ASSIST ANCE TROUBLESHOOTING Câblage alternatif (systèmes classiques) Si les étiquettes ne correspondent pas aux bornes, les raccorder comme l’indique l’explication ci-dessous (voir les notes ci-dessous). Enlever le cavalier en métal en métal entre R et Rc seuleme...
Page 54 - Raccorder les fils : Thermopompe; Câblage—thermopompe
Guide d’installation avancé 69-2206EF—01 22 SETUP CÂBLAGE ASSIST ANCE TROUBLESHOOTING Raccorder les fils : Thermopompe 1. Faire correspondre chaque fil étiqueté à la même lettre sur le nouveau thermostat. 2. Desserrer les bornes à vis à l’aide d’un tournevis, insérer les fils et serrer les vis. 3. S...
Page 55 - Câblage alternatif (pour thermopompes seulement)
RTH600 2 69-2206EF—01 SETUP CÂBLAGE ASSIST ANCE TROUBLESHOOTING Câblage alternatif (pour thermopompes seulement) Laisser le cavalier en place, en reliant les bornes R et Rc . Si l’ancien thermostat avait des fils de V et de VR , arrêter maintenant et communiquer avec un entrepreneur pour l’aide.Si l...
Page 56 - Assistance à la clientèle; Si vous éprouvez des difficultés, nous vous proposons
Guide d’installation avancé 69-2206EF—01 2 Assistance à la clientèle SETUP WIRING DÉP ANNAGE TROUBLESHOOTING Si vous éprouvez des difficultés, nous vous proposons d’essayer les solutions suivantes. La plupart des problèmes peuvent être corrigés rapidement et facilement. Rien n’apparaît à l’écran Vér...
Page 58 - Dépannage; Pour obtenir de l’aide sur ce produit Honeywell, veuillez; Garantie limitée d’un an
Guide d’installation avancé 69-2206EF—01 26 Dépannage SETUP WIRING ASSIST ANCE ASSIST ANCE Pour obtenir de l’aide sur ce produit Honeywell, veuillez consulter le site http://DIYthermostats.honeywell.com ou vous adresser sans frais aux Services à la clientèle de Honeywell au 1 800 468-1502 . Honeywel...
Page 60 - Solutions de régulation et d’automatisation; AVIS CONCERNANT LE MERCURE :; Si le
Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://DIYthermostats.honeywell.com ® Marque enregistrée aux États-Unis. Brevets US N OS 6,595,430; 7,114,554; 7,274,972; 7,225,054 et autres brevets en instance. © 2008 Honeywell International Inc. 69-2206EF— 01 M.S. 06-0...