Page 2 - Welcome; Getting set up and ready is simple.; Before you begin; network password
2 Install your thermostat. Connect your home Wi-Fi network. Register online for remote access. 1 2 3 Welcome Getting set up and ready is simple. Before you begin View the installation video at wifithermostat.com/support You will also need: • Small screw driver• Pen• Thermostat ID card • Your home Wi...
Page 3 - Install your thermostat
3 This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. 1.1 Switch OFF power to your heating/cooling system 1.1...
Page 4 - b If no wire is connected to a
4 C M33823A Terminal designation If you have an older thermostat with a sealed mercury tube, see warning page for proper disposal instructions. 1.2 Remove old thermostat faceplate and leave wires connected 1.2a Take a picture of the wire connections for later reference. 1.2b If no wire is connected ...
Page 5 - Do not label by wire color.; If no tag matches a terminal; Remove wallplate; Sticky tag
5 1.3 Label wires Do not label by wire color. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to old thermostat terminal designations, not by wire color. Note: If no tag matches a terminal designation, write the appropriate letter on a blank sticky tag. No...
Page 6 - thermostat
6 1.5 Mount wallplate for Wi-Fi thermostat Mount your new wallplate using screws and anchors included with the thermostat. If necessary: • Drill 3/16-in holes for drywall • Drill 7/32-in holes for plaster Note: You may be able to use your existing wall anchors. Hold the wallplate up to the existing ...
Page 7 - b Straighten wire and gently slide; R and Rc; EXAMPLE WIRING
7 MCR34540 C K Rc R W- O/B Y G W2- Aux/E Y2 L W Y G R C 1.6 Connect wires Important! C wire is required and is the power source. Without a C wire, your thermostat will not power up. View the Alternate Wiring videos at wifithermostat.com/videos 1.6a Starting with the C Wire, match the sticky tag on t...
Page 8 - User Guide; Aux
8 Labels don’t match or have heat pump system? See User Guide . 1.6c In the image on the right, check the box next to each connection. You will use this checklist in Step 1.9. 1.6d Verify wire is firmly secured by gently pulling on wire. 1.6e Repeat steps a– d for all other wires. 1.6f Push an y exc...
Page 9 - system ON; c Switch power back ON for
9 1.7 Attach thermostat to wallplate Align the thermostat with wallplate and snap into place. Thermostat Wallplate LEVEL HERE M34498 1.8 Switch heating/cooling system ON Important! 1.8a Verify that the C wire is connected at the thermostat and at the heating/cooling system. 1.8b Make sure the heatin...
Page 10 - • Language; Next; b Select Home or Business; Next; THERMOSTAT and follow the
10 Next 1.9 Select setup Before connecting to your Wi-Fi network, you need to set initial thermostat options to define your heating/cooling system: • Language • Home or business Follow prompts on the screen to select appropriate options. 1.9a Touch the language you want the thermostat to display, th...
Page 11 - d Select what your thermostat will; e Select your system type and; the checklist from Step 1.6 when
11 1.9d Select what your thermostat will control and touch Next . 1.9e Select your system type and touch Next The system type determines other selection for completing initial setup. Use the checklist from Step 1.6 when making selections. 1.9f Touch Next after making selections on each screen. 1.9g ...
Page 12 - message “Searching for wireless; I’ll do it later; Connect to your Wi-Fi network
12 2.1 Connect the Wi-Fi network After touching Done on the final screen of the initial set up (Step 1.9g), the thermostat displays an option to connect to your Wi-Fi network. 2.1a Touch Yes to connect the thermostat to your Wi-Fi network. The screen displays the message “Searching for wireless netw...
Page 13 - Done; shows a “Connection Successful”; Rescan
13 2.1b Touch the name of the network you want to use. The thermostat displays a password page. 2.1c Using the keyboard, touch the characters that spell out your home network password. 2.1d Touch Done . The thermostat displays “Connecting to your network. Please wait...” then shows a “Connection Suc...
Page 14 - Find additional information in the; Getting Help; Do not place your old thermostat in the trash if it contains
14 If you get stuck... At any point in the Wi-Fi connection process, restart the thermostat by removing the thermostat from the wallplate, wait for 5 seconds, and snap it back into place. From the home screen, touch MENU > Wi-Fi Setup > Choose a Network . Continue with Step 2.1b. Need more hel...
Page 15 - Register online for remote access; To register your thermostat, follow the; If you touch; before you register
15 Register online for remote access 3 Done Register online for remote access Press for info To register your thermostat, follow the instructions on Step 3.1. Note: The Register Online screen remains active until you complete registration and/or touch Done . Note: If you touch Done before you regist...
Page 16 - View the Wi-Fi Thermostat; Open the Total Connect
16 M31570 M31570 To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Follow the instructions below. View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos 3.1 Open the Total Connect Comfort web site Go to www.mytotalconnectcomfort.com
Page 17 - Login or create an account; If you have an account,; Login; – or –; Create An Account; a Follow the instructions on the; Check your email; for a response; Follow activation instructions
17 3.2 Login or create an account If you have an account, click Login – or – click Create An Account . 3.2a Follow the instructions on the screen. 3.2b Check your email for a response from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your jun...
Page 19 - iTunes; Getting started with voice
19 GET IT ON Download on iTunes Total Connect Comfort free app is available for Apple ® iPhone ® , iPad ® and iPod touch ® devices at iTunes ® or at Google Play ® for all Android™ devices. Getting started with voice For information on how to control your thermostat with voice, see the included “Talk...
Page 20 - Automation and Control Systems; Honeywell International Inc.
Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 wifithermostat.com ® U.S. Registered Trademark.Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2013...
