Page 2 - Trademarks
Copyright © 2006 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. ...
Page 5 - BT
1 I NTRODUCTION MS9535 Voyager BT ® laser bar code scanner is a new member of Metrologic’s Voyager series. Besides featuring the patented technologies of an automatic trigger and CodeGate, the Voyager BT has incorporated the latest Bluetooth ® wireless technology. This technology gives the customer ...
Page 6 - Scanner and Accessories; Description
2 I NTRODUCTION Scanner and Accessories B ASIC K IT Part # Description MS9535-5 or MS9535-5M Voyager BT Scanner or Voyager BT Scanner with Memory 70-79004 x MS9535 VoyagerBT Wireless Hand Held Laser Scanner Installation and User’s Guide* 00-02544 x MetroSelect Single-Line Configuration Guide* 70-735...
Page 8 - Scanner Components
4 I NTRODUCTION Scanner Components Figure 1. Scanner Components Item # Description 1 Blue LED (see pages 23) 2 White LED (see pages 23) 3 Amber LED (see pages 23) 4 CodeGate Button 5 Output Window, Laser Aperture 6 Speaker (see page 22) 7 Wrist Strap 8 Charging Contacts /Rubber Feet Do not short cir...
Page 9 - Receiver/Charger Cradle Components
5 I NTRODUCTION Receiver/Charger Cradle Components Figure 2 Cradle Components Item # Description 1 Recesses for Wall Mount Hardware 2 Power and Communication Connectors 3 Cable Strain Relief Channel 4 Charging Contacts Do not short circuit the charging contacts on the scanner! A short circuit can oc...
Page 10 - NTRODUCTION; Caution and Serial Number Labels; Figure 3
6 I NTRODUCTION Caution and Serial Number Labels The scanner and cradle have labels that provide important information including; the model number, date of manufacture, serial number, safety and regulatory information. Figure 3 provides examples of these labels and their locations. Figure 3. Label S...
Page 11 - Establish communication between the scanner and cradle.; Establishing Bluetooth
7 C RADLE I NSTALLATION TO THE H OST D EVICE RS232 and Light Pen 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Connect the 9-pin D-type Female connector of the RS232 cable to the proper COM port of the host device....
Page 12 - Keyboard Wedge
8 C RADLE I NSTALLATION TO THE H OST D EVICE Keyboard Wedge 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Disconnect the keyboard from host. 4. Connect the “Y” ends of the communication cable to the keyboard and ke...
Page 13 - Stand Alone Keyboard
9 C RADLE I NSTALLATION TO THE H OST D EVICE Stand Alone Keyboard 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Connect the 6-pin Mini-DIN male connector of the keyboard cable to keyboard port on the host device. 4...
Page 14 - IBM
10 C RADLE I NSTALLATION TO THE H OST D EVICE IBM 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Connect the IBM SDL connector to the IBM port on the host device. 4. Plug the power supply into the power jack on the ...
Page 15 - Low Speed USB; Important Notes for Voyager; USB Interface Scanners
11 C RADLE I NSTALLATION TO THE H OST D EVICE Low Speed USB Important Notes for Voyager BT USB Interface Scanners In order for the Voyager BT to scan and charge properly both the power supply and the USB communication cable must be attached before the host device is turned on. When the scanner is in...
Page 17 - Full Speed USB (Powered by External Power Supply); Establishing Bluetooth Communication
13 C RADLE I NSTALLATION TO THE H OST D EVICE Full Speed USB (Powered by External Power Supply) 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the charger cradle. 3. Connect the USB A type connector to the USB port on the host dev...
Page 18 - Full Speed USB (Powered by the Host Device)
14 C RADLE I NSTALLATION TO THE H OST D EVICE Full Speed USB (Powered by the Host Device) 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the charger cradle. 3. Connect the female DC power jack of the USB cable to the center power ...
Page 19 - Between the Scanner and the Cradle; Dynamic Pair Function; paired; To established communication between the scanner and cradle:
15 E STABLISHING B LUETOOTH C OMMUNICATION Between the Scanner and the Cradle Bluetooth communication between the scanner and cradle must be established before the VoyagerBT can be used for normal operation. Dynamic Pair Function Dynamic Pair Function refers to when a scanner has been paired or link...
Page 20 - When the MS9535 Acts as a Client to Other Bluetooth Devices; 00CA7FFFF99), scan the address bar code to establish
16 E STABLISHING B LUETOOTH C OMMUNICATION When the MS9535 Acts as a Client to Other Bluetooth Devices The MS9535 scanner can also link to other Bluetooth compatible devices such as a desktop computer, laptop computer, or printer. As a default, the MS9535 will act as the client to another Bluetooth ...
Page 22 - XX; Charging Guidelines and Low Battery Indicators
18 T HE MI9535-5 XX R ECEIVER / C HARGER C RADLE Charging Guidelines and Low Battery Indicators The scanner should be fully charged prior to being placed into service. Metrologic recommends that Bluetooth communication between the scanner and the cradle be established first before charging. To charg...
Page 23 - Safety Precautions for Lithium Batteries
19 T HE MI9535-5 XX R ECEIVER / C HARGER C RADLE Safety Precautions for Lithium Batteries • Do not place batteries in fire or heat the batteries. • Do not store batteries near fire or other high temperature locations. • Do not store or carry batteries together with metal objects. • Do not expose bat...
Page 24 - Communication Protocols; Cradle; xx; charging capabilities only
20 T HE MI9535-5 XX R ECEIVER / C HARGER C RADLE Communication Protocols The MI9535-5 xx cradle works as a receiver and a charger for the MS9535. Receiver Once Bluetooth communication has been established between the scanner and cradle, the cradle will act as a receiver for the barcode data transmit...
Page 25 - Modes of Operation; MetroSelect; MetroSelect Single-Line Configuration Guide (
21 S CANNER O PERATION Modes of Operation Auto-Trigger Mode z Auto Trigger, In-Stand z Auto-triggers while in the stand z Bar code is automatically decoded and transmitted CodeGate Mode z CodeGate, Out-of-Stand z CodeGate activates when removed from the stand z Bar code data is transmitted when the ...
Page 26 - Indicators; Audible; One Beep; successfully; Two Beeps
22 S CANNER O PERATION Indicators Audible When the scanner is in operation, it provides audible feedback. These sounds indicate the status of the scanner . Eight settings are available for the tone of the beeper (normal, 6 alternate tones and no tone). To change the tones, refer to the MetroSelect S...
Page 27 - wake; Steady Amber
23 S CANNER O PERATION Indicators Visual The MS9535 has three LED indicators (blue, white and amber) located on the head of the scanner. When the scanner is in operation, the flashing or stationary activity of the LEDs indicates the status of the scanner and the current scan. Blue, White & Amber...
Page 28 - Alternating Flashing of Blue and White
24 S CANNER O PERATION Indicators Visual Alternating Flashing of Blue and White This indicates the scanner is in configuration mode. Two razzberry tones indicate that an invalid bar code has been scanned while in this mode . If the scanner is in RangeGate active mode, this indicates the SRAM of the ...
Page 30 - Depth of Field by Bar Code Element Width*; Minimum Bar Code Element Width
26 S CANNER O PERATION Depth of Field by Bar Code Element Width* Minimum Bar Code Element Width A B C D E F G H J K mm .13 .15 - - .19 - .25 .33 .53 - mils 5.2 5.7 - - 7.5 - 10 13 21 - Figure 12. Depth of Field by Bar Code Element Width * All specifications are subject to change without notice.
Page 31 - IR Activation Range
27 S CANNER O PERATION IR Activation Range Figure 13. IR Activation Range * All specifications are subject to change without notice.
Page 32 - Cable Removal
28 S CANNER O PERATION Cable Removal Before removing the cable from the scanner, Metrologic recommends that the power on the host device is off and the power supply has been disconnected from the PowerLink cable 1. Locate the small ‘pin-hole’ on the bottom of the cradle near the cable. 2. Bend an or...
Page 33 - Symptoms; A flash ROM upgrade required.
29 T ROUBLESHOOTING G UIDE The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-Metro or 1-800-436-3876 to preserve the limited warranty terms. Symptoms Possible Causes Solution The scanner has no LEDs, beeper or laser while seated in cradle. No power i...
Page 37 - Scanner and Cradle Specifications; Operational
33 D ESIGN S PECIFICATIONS Scanner and Cradle Specifications Operational Light Source: Visible Laser Diode 650 nm ± 10 nm Laser Power: 0.96 mW (peak) Depth of Scan Field: 0 mm – 203 mm (0” – 8”) 0.330 mm (13 mil) bar code at default setting Scan Speed: 72 ± 2 scan lines per second Scan Pattern: Sing...
Page 38 - Electrical; Environmental
34 D ESIGN S PECIFICATIONS Scanner and Cradle Specifications Electrical Scanner: 5.2VDC ± 0.25V Input Voltage: Cradle: 5.0VDC ± 0.25V Cradle Power: 0.6 W Operating 1.15 W Scanner Power: Sleep 150 mW Operating 230 mA@5VDC Scanner Current: Sleep 30mA@ 5VDC Cradle Current: Cradle: 120 mA @ 5VDC DC Tran...
Page 44 - ROM; MetroSet 2; all; before; Bar Codes; MetroSet
40 U PGRADING THE F LASH ROM F IRMWARE The MetroSet 2 program also allows the user of a Metrologic scanner to quickly upgrade to a new or custom version of software. It requires the use of a personal computer running under Windows 95 or greater and the use of a communication port. The user merely co...
Page 45 - Cradle Pinout Connections
41 C RADLE AND C ABLE T ERMINATIONS Cradle Pinout Connections There are interface and power ports located on the bottom of each MI9535-5 xx cradle. The number of ports and type of connection varies by cradle model and the interface required. The following charts provide the pinout information for th...
Page 46 - Low Speed USB Port
42 C RADLE AND C ABLE T ERMINATIONS Cradle Pinout Connections MI9535-538 Low Speed USB Port 10-Pin, RJ45 Pin Function 1 Ground 2 RS232 Transmit Output 3 RS232 Receive Input 4 RTS Output 5 CTS Input 6 Reserved 7 Reserved 8 Reserved 9 Reserved 10 Shield Ground USB Type B Pin Function 1 VCC 2 D- 3 D+ 4...
Page 47 - Full Speed USB
43 C RADLE AND C ABLE T ERMINATIONS Cradle Pinout Connections MI9535C540 Full Speed USB 10-Pin, RJ45 Pin Function 1 Ground 2 RS232 Transmit Output 3 RS232 Receive Input 4 RTS Output 5 CTS Input 6 D+ 7 USB +5V 8 D- 9 Reserved 10 Shield Ground Figure 20. Cradle MI9535C540
Page 48 - Cable Connector Configurations (Host End); RS232/Light Pen Cable; Pin; USB Cable; Pin Function
44 C RADLE AND C ABLE T ERMINATIONS Cable Connector Configurations (Host End) RS232/Light Pen Cable MLPN 54-54000x-N Pin Function 1 Shield Ground 2 RS232 Transmit Output 3 RS232 Receive Input 4 DTR Input/Light Pen Source 5 Power/Signal Ground 6 Light Pen Data 7 CTS Input 8 RTS Output 9 +5VDC 9-Pin D...
Page 49 - Cable Connector Configurations; Full Speed USB Cable with power; Full Speed USB Cable
45 C RADLE AND C ABLE T ERMINATIONS Cable Connector Configurations Full Speed USB Cable with power from Register MLPN 54-54073x Pin Function 1 +5VDC 2 D- 3 D+ 4 Ground 5 Ground 6 +12V 7 +12V 8 Ground USB A Plus Power Type Connector Full Speed USB Cable with external Power Supply MLPN 54-54200x-N Pin...
Page 51 - Safety; ITE Equipment
47 R EGULATORY C OMPLIANCE Safety ITE Equipment IEC 60950-1, EN 60950-1 Laser Laser Class 1: IEC 60825-1:1993+A1+A2, EN 60825-1:1994+A1+A2 Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Under no circ...
Page 52 - EMC
48 R EGULATORY C OMPLIANCE EMC Emissions FCC Part 15, ICES-003, CISPR 22, EN 55022, EN300 328 V1.6.1, EN301 489-17 V1.2.1 Immunity CISPR 24, EN 55024 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Clas...
Page 53 - Class B Devices; Notice; Remarque
49 R EGULATORY C OMPLIANCE EMC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Class B Devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (...
Page 55 - ATENTS
51 P ATENTS This METROLOGIC product may be covered by, but is not limited to, one or more of the following U.S. Patents: US Patent No. 4,958,984; 5,081,342; 5,260,553; 5,340,971; 5,340,973; 5,424,525; 5,468,951; 5,484,992; 5,525,789; 5,528,024; 5,591,953; 5,616,908; 5,627,359; 5,661,292; 5,777,315; ...
Page 57 - NDEX
53 I NDEX pin-hole........................................ 28 pinout .................................... 41–46 power..................... 3, 18, 19, 33, 34 R range ................... 21, 26, 27, 34, 35 RangeGate ............................ 21, 39 razzberry tone ............. see indicator receive...
Page 60 - Printed in the USA
November 2006 Version 01 Printed in the USA 7 0 -7 9 0 0 4 F
