Honeywell ML6185- Manual

Honeywell ML6185– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

5

6

7

8

9

10

11

12

Page: / 12 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – SPECIFICATIONS • ORDERING INFORMATION; Specifications
• Page 3 – SPECIFICATIONS
• Page 4 – SPECIFICATIONS • INSTALLATION; Installation; WHEN INSTALLING THIS PRODUCT...; LOCATION; CAUTION; PREPARATION
• Page 5 – Installing the Actuator for Three-Point Mounting; The ML6185 Direct Coupled Actuator is designed with
• Page 7 – INSTALLATION
• Page 8 – WIRING; All wiring must comply with local electrical codes,
• Page 9 – INSTALLATION • OPERATION; Connecting ML6185 Actuators in Parallel; ML6185 Actuators can be stacked on one damper shaft; Operation; The ML6185 Direct Coupled Actuator is designed to be
• Page 10 – OPERATION; FULLY CLOCKWISE SPRING RETURN INDICATOR START POSITIONS
• Page 11 – CHECKOUT; Checkout; IMPORTANT: When power is interrupted, the actuator; DIRECT CHECKOUT

Loading the manual

1

63-2483—2

G.R. • Rev. 4-95 • ©Honeywell Inc. 1995

ML6185

Spring Return

Direct Coupled Actuator

The ML6185 Spring Return Direct Coupled

Rotary Actuator is a floating control motor that can
be used with controls that provide switched or
floating single pole double throw (spdt) control
output to operate dampers in heating, ventilation,
and air conditioning (HVAC) applications.

■

Mounts directly on horizontal 3/8 in., 1/2 in., and
5/8 in. round and square damper shafts by using the
appropriate insert. Most models are shipped with 1/
2 in. insert.

■

Provides 50 lb-in. running and spring return torque.

■

Magnetic coupling eliminates the need for mechani-
cal stops or limit switch adjustments by limiting
stall torque to 130 lb-in. maximum.

■

95

°

stroke provides necessary compression of rub-

ber/neoprene gaskets commonly used on 90

°

low

leakage dampers.

■

88 second synchronous timing can eliminate need
for feedback position indication in closed-loop tem-
perature control applications.

■

Removable splined output hub permits premounting
of the hub on the damper shaft, providing installation
flexibility.

■

Reversible mounting allows actuator to be used for
either clockwise (cw) or counterclockwise (ccw)
spring rotation.

■

Designed for both single-point and three-point mount-
ing, providing installation flexibility.

■

Available with or without a time-out feature. Models
without the time-out feature are designed to be used
with intelligent building management system and/or
controller.

■

Standard models have two 8 mm x 12 mm long set
screws for securing the damper shaft. Actuator
models are available for various shaft sizes that will
allow the damper shaft to operate centered inside the
output hub.

■

Standard one-meter cable with color-coded lead-
wires allows external wire connections with 1/2 in.
conduit connectors.

■

Can mount two or more actuators on one damper
shaft to increase output torque for use on dampers
larger than 16 square feet.

63-2483-2

CONTENTS

Specifications ................................................. 2
Ordering Information ..................................... 2
Installation ..................................................... 4
Operation ....................................................... 9
Checkout ....................................................... 11

Other Manuals for Honeywell ML6185

• User Manual

Other Honeywell Models

• Honeywell DT8050A
  • Installation Manual
  • Manual
  • User Manual
• Honeywell DT8050
  • Manual
  • User Manual
• Honeywell TPFIT25WK
  • User Manual
• Honeywell TPFIT25AWK
  • User Manual
• Honeywell TPFIT32WK
  • User Manual
• Honeywell TPFIT32AWK
  • User Manual
• Honeywell 24DX47
  • User Manual
  • Manual