Honeywell ML6131- User Manual
Honeywell ML6131– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ORDERING INFORMATION
- Page 3 – INSTALLATION; WARNING; Location; CAUTION
- Page 4 – Preparation; Installation
- Page 5 – Minimum Position Setscrew
- Page 6 – Wiring; Auxiliary Switches
- Page 7 – Auxiliary Potentiometers
- Page 8 – OPERATION; VAV Systems; Parallel Actuators; CHECKOUT
PRODUCT DATA
63- 2498- 2
® U.S. Registered Trademark
Copyright © 2000 Honeywell Inc. • All Rights Reserved
®
ML6131
Direct Coupled Actuator
APPLICATION
The ML6131 Direct Coupled Actuator (DCA) is used to control
dampers in applications such as variable air volume (VAV)
terminal units. It is suitable for use with single pole double
throw (spdt) floating thermostats or two-position control
systems.
FEATURES
•
Mounts directly on damper shaft.
•
6 lb-in. torque.
•
Selectable 45°, 60°, and 90° stroke in either clockwise
(cw) or counterclockwise (ccw) directions.
•
15 second timing model suitable for use with pressure
independent VAV systems.
•
Magnetic coupling typically provides a maximum of
18 lb-in. stall torque eliminating the need for
mechanical stops or limit switch adjustments.
•
Two field-addable auxiliary switches.
•
Field-addable auxiliary feedback potentiometer.
•
Models available with 0° to 30° minimum position
adjustment in cw or ccw directions.
•
Compatible for use with Honeywell W7620 Terminal
Unit Controller.
•
Can be used with the Commercial Zone Damper in the
W7600 Commercial Zone System.
•
Manual declutch on some models.
Contents
Application ........................................................................
Features ...........................................................................
Specifications ...................................................................
Ordering Information ........................................................
Installation ........................................................................
Operation ..........................................................................
Checkout ..........................................................................
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell ML6131
Summary
ML6131 DIRECT COUPLED ACTUATOR 63-2498—2 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further informat...
ML6131 DIRECT COUPLED ACTUATOR 3 63-2498—2 Fig. 1. Approximate dimensions of ML6131 Direct Coupled Actuator in in. (mm). INSTALLATION When Installing this Product... 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2. Check the rat...
ML6131 DIRECT COUPLED ACTUATOR 63-2498—2 4 Preparation Before mounting the actuator onto the shaft, determine the following: 1. Size of the shaft (3/8 in. to 1/2 in.). 2. Direction the shaft rotates to open the device (cw or ccw). See Fig. 3. 3. Degrees of actuator stroke for opening device (45°, 60...
