Page 5 - Features; General Information; STAY and AWAY arming modes:
– 5 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features General Information This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, ...
Page 6 - Remote Phone Control Feature; Speaker Phone Operation:; Speaker Phone Feature; LynxSIA Plus False Alarm Prevention Features; Burglary Abort Window:
– 6 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features • Two-way voice: Allows the central station to listen, talk to or conduct two-way conversations with individuals on the premises Refer to the Two-Way Voice section for detailed information. • Phone Control: Provides a rem...
Page 7 - General Operation; Zones; Fire Alarm System; UL; Burglary Protection; NO DELAY; Bypassing Protection Zones; AWAY; Arming the System; Security Codes; Alarms; CODE; Disarming the System
– 7 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation Zones Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the mast...
Page 8 - LynxSIA Plus False Alarm Prevention Feature; Two-Way Voice Feature; individuals at the premises.; Listen
– 8 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation LynxSIA Plus False Alarm Prevention Feature Note that in cases of alarm, the LynxSIA Plus may disarm as soon as the security code is entered, or you can still enter CODE + OFF . If your system is connected to a c...
Page 9 - = Boxes represent the entering of your 4-digit user code.; (switch back and forth between two calls using call waiting)
– 9 – QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS NOTE: = Boxes represent the entering of your 4-digit user code. SECURITY FUNCTIONS Checking system status: --------------------- STATUS To arm in STAY mode: -------------...
Page 11 - About the Master Keypad; General
– 11 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Master Keypad General IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE f...
Page 12 - Master Keypad Definitions
– 12 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Master Keypad Definitions 1000-300-013-V0 ARMED READY BYPASS NO DELAY RECORD TEST FUNCTION STATUS VOLUME PLAY CODE LIGHTS ON LIGHTS OFF CHIME ESCAPE ADD DELETE SELECT 1 3 2 4 5 6 9 1 2 0 OFF AWAY STAY AUX 9 3 6 8 7 4 5 17 19 21 1...
Page 14 - About the Display and Indicators; Display Definitions; Trouble Messages; Disarmed Ready to Arm:; Record Press Off to Stop:
– 14 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Display and Indicators Display Definitions (for other displays, see Trouble Messages ) Alarm: Displayed when the system is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency ...
Page 15 - LED Meanings; ARMED; OFF = System disarmed; READY
– 15 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Display and Indicators LED Meanings ARMED LED: ON = System armed (Red) OFF = System disarmed Blinking = System armed, but a fault exists Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode is a...
Page 16 - Checking System Status; BYPASSING PROTECTION; Press the; STATUS; Key; STATUS; † (second depression must be made within 10 seconds of the first); System Can Be Armed
– 16 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Checking System Status General Information Before arming your system, all protected doors, windows, and other protection zones must be closed or bypassed (see the BYPASSING PROTECTION section). Pressing th...
Page 17 - Arming in Stay Mode; armed STAY–exit now; Restarting Exit Delay While System Armed; by pressing the; allowing someone to enter or exit.; Exit Delay Restart/Reset; Press; STAY; Arming In Away Mode; armed AWAY–exit now
– 17 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Arming in Stay Mode Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. The green RE...
Page 18 - Auto Stay Feature; Armed STAY Instant –exit now; To arm with NO DELAY:; Quick Arming; arm; the; disarm; To arm with NO DELAY if Quick Arm is active:
– 18 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Auto Stay Feature If this feature is enabled by installer, the LynxSIA Plus, when armed AWAY from the control’s keypad or a Wireless Keypad, switches to the STAY mode if the Exit Time exp...
Page 19 - Exit Delay; Exit delay; Exit Alarm Active; zone is faulted within two minutes after the end of the exit delay.; Entry Delay; Entry Delays; key when arming. This can; LynxSIA Plus Exit/Entry Delay Times
– 19 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Entry/Exit Delays Exit Delay Exit delay begins immediately after arming the system, and gives you time to leave through the designated exit door without setting off an alarm. A slow beeping will sound thro...
Page 20 - Use the; Summary of; To disarm the system and silence burglary alarms:; key is not required. The entry beeps or; Memory of Alarm
– 20 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Disarming the System NOTE: The control will provide a long confirmation ding when it is disarmed using an RF Key Fob. Use the OFF key to disarm the system and to silence alarm and trouble sounds. See the S...
Page 21 - BYPASS; Forced Bypass; Displaying Bypassed Zones
– 21 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Bypassing Protection Zones Bypassing Individual Zones Use the BYPASS key when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause...
Page 22 - Panic Keys / Chime Mode; Chime Mode
– 22 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Panic Keys / Chime Mode Panic Keys Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer...
Page 23 - Paging Feature; Automatic Paging; The Pager Code takes the following form:; Manual Paging; AUX; AUX Function
– 23 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Paging Feature Automatic Paging If the Paging feature has been programmed for your system, your pager will respond to certain conditions as they occur in your system by displaying a message that indicates the type of condition that h...
Page 24 - “Follow Me” Announcement Feature; System Announcements
– 24 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS “Follow Me” Announcement Feature “Follow Me” Reminder and System Announcements If the “Follow Me” Announcement feature has been programmed your system will automatically dial a telephone number and deliver a voice message. The two di...
Page 25 - ESCAPE to quit” and “Phn Follow Me Phone#” will be displayed.; After you have entered the last digit press; ADD; Master user code; ADD; without entering any digits.
– 25 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS “Follow Me” Announcement Feature NOTES: (1) The “Follow Me” announcement will be terminated if any new report needs to be sent or if any key is pressed on the Lynx Plus Series keypad or a wireless (RF) keypad. The [ ✻ ] key on a wire...
Page 26 - Device Descriptions; See your installer for device numbers assigned for your system.; Device Description
– 26 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Using Powerline Carrier Device Commands (Lights On/Lights Off Keys) General Information Powerline Carrier devices (e.g. X10 brand devices) are programmable switches that can be used to perform many different functions. Your system ma...
Page 27 - Message Recording/Playback/Volume Control; Recording a Message; To stop recording before the end of 85 seconds:; Message Playback; To play back a message:; Deleting Messages; To delete all messages:; While the messages are being announced:
– 27 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Message Recording/Playback/Volume Control The Lynx Plus Series Message Center allows you to record, play and delete messages. The maximum message duration is 85 seconds. NOTES: (1) The Record/playback functions can only be performed ...
Page 28 - You; To adjust message playback/system announcement volume:; when; To restore announcement sounding:
– 28 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Message Recording/Playback/Volume Control Adjusting the Volume The volume level of message playback, system announcements, and status beeps can be changed. You can also mute system announcements if desired. See NOTE below if using a ...
Page 29 - Pager Feature; Defining the AUX Function; Performing the AUX function
– 29 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS AUX Function General Information The AUX key may have been programmed to either perform a predefined function or to send a preset message to a pager/“Follow Me” system phone number (see the Pager Feature section for pager operation o...
Page 30 - The system must be disarmed.; The system will enter the Voice Prompt Calendar Setting mode.; any time to repeat a voice prompt.; Hour; (The current hour will be displayed with the A or P indication.); Minute
– 30 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Clock/Calendar Your system can display the current time (see your installer). The date is not displayed, but has an internal function. The system must be disarmed. To set the time and date: + FUNCTION + [63] Master user code or Insta...
Page 31 - Month
– 31 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Clock/Calendar 4. The system will announce, “Enter two-digit month, press ADD to accept, ESCAPE to quit”. 1 Month Month (The current month will display.) Enter the 2-digit month designation (i.e., 01-12). Press [ADD] to accept the en...
Page 32 - Scheduling User Interface; To access the Scheduling User Interface enter:; x n; Schedule Number; Selections
– 32 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Scheduling User Interface To access the Scheduling User Interface enter: + FUNCTION + [64] Master user code or Installer Code The system will initially display “Set Schedule” followed by the programming prompts as shown below. Note t...
Page 33 - xid; Event Identifier
– 33 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Scheduling User Interface xid Event Identifier Event Identifier Enter a 1-digit schedule action. (x = event identifier) NOTES: 1. See Table 1 for an explanation of each entry of the event identifier. 2. If “Follow me” reminder teleph...
Page 34 - xxbd; Begin Day
– 34 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Scheduling User Interface xxbd Begin day 01-17 Begin Day Enter a two-digit begin day (xx = begin day) Notes: 1. Entries 01 – 07 will be automatically deleted from the schedule after it occurs. Entries 09-17 will run continuously, unt...
Page 35 - xxAe; End Day
– 35 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Scheduling User Interface xxAe End hour AM End Time (AM/PM) Enter a selection for AM or PM. (xx = end hour) Selections 0 = AM 1 = PM [*] = Accept entry and continue [#] = Return to previous prompt E:xx End time(min) End Time (minute)...
Page 36 - xxdn; Table 1 - Event Identifier Entries; Event; No event scheduled (or schedule is temporarily disabled); = Latch Key Report
– 36 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Scheduling User Interface xxdn Device # 1-16 Device Number Enter a two-digit device number (xx = device number) Selections 01-16 [*] = Accept entry and continue [#] = Return to previous prompt Table 1 - Event Identifier Entries Event...
Page 37 - modem tone will be generated before the end of the session.; Using Remote Phone Control Feature; ENTER CODE
– 37 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Remote Phone Control Feature The Lynx Plus Series is equipped with a remote interactive phone capability that permits access to the security system from any off-site touch-tone telephone using all user codes. If this feature has been...
Page 38 - NOTES
– 38 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Remote Phone Control Feature Enter: (within eight seconds) Your user code Upon entering remote phone control mode the Lynx will announce “System, enter code”. Remote Phone Control Commands To remotely disarm system: + [1] Your user c...
Page 39 - Using the Speaker Phone Feature
– 39 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Speaker Phone Feature If this feature has been programmed the Lynx Plus Series is capable of operating as a speaker phone. During speaker phone operation the system will provide the following functions: • All function/event processin...
Page 40 - Lynx Plus Series Speaker Phone Functions; To answer a call using the Speaker Phone:; Entering
– 40 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Speaker Phone Feature Lynx Plus Series Speaker Phone Functions To place a call using the Speaker Phone: [#] + AUX and dial the desired phone number. To answer a call using the Speaker Phone: [#] + AUX To flash (switch between two cal...
Page 41 - Remote Services
– 41 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Remote Services Your security system may be capable of providing a series of web-based services that allow you to communicate with your security system remotely in a number of ways. These services provide the ability to: • Access to ...
Page 42 - Should you become aware of a fire emergency
– 42 – FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM (If Installed) General Information UL UL UL UL Lynx Plus Series is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC or LYNXRCHKIT-SHA) is installed. General Your fire a...
Page 43 - National Fire Protection Association’s
– 43 – FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM National Fire Protection Association’s Smoke Detector Recommendations UL UL UL UL Lynx Plus Series is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC OR LYNXRCHKIT-SHA...
Page 44 - Emergency Evacuation; so that they can be heard by all occupants.
– 44 – FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM Emergency Evacuation UL UL UL UL Lynx Plus Series is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC OR LYNXRCHKIT-SHA) is installed. Establish and regularly practice ...
Page 45 - This code can be used to arm the system, but cannot disarm the system; unless; To Add/Delete a User or Change a User's Code; Changing the Master User Code
– 45 – SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Security Codes General Information For additional security you (the Master User Code) can assign secondary user codes to individual users enabling them to perform specific system functions. These secondary users are identifie...
Page 46 - Testing the System (to be conducted weekly); Entering Test Mode; The; All LCD segments will light for 3 seconds.; Exit Test Mode; When testing is completed, exit the TEST mode by entering:; for the last 10 minutes of test mode.
– 46 – SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Testing the System (to be conducted weekly) Entering Test Mode The TEST key puts your system into the Test mode, which allows each protection point to be checked for proper operation. The keypad sounds a single beep every 45 ...
Page 47 - Typical Trouble Condition Displays
– 47 – SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Trouble Messages Typical Trouble Condition Displays To silence the beeping sound for fault conditions, press any key. Fault Indicates that a problem exists with the zone(s) displayed, accompanied by rapid beeping. First, dete...
Page 48 - Maintaining your system; Routine Care; Do not spray water or; Testing the System; Low Battery Conditions in Wireless Sensors; Changing the Lynx Plus Series System Battery
– 48 – SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Maintaining your system Routine Care • Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected doors or windows. • Keep dust from accumulating on the keypad and a...
Page 50 - Additional Announcements:; Fire Alarm + zone voice descriptor
– 50 – SUMMARY SUMMARY SUMMARY SUMMARY O O O OF AUDIBLE NOTIFICATION F AUDIBLE NOTIFICATION F AUDIBLE NOTIFICATION F AUDIBLE NOTIFICATION Additional Announcements: Pressing STATUS key once will announce the following primary messages, depending on the system’s status at the time: Disarmed–Ready to A...
Page 52 - electric inspection authority, or electrician, as appropriate.; Ringer Equivalence Number Notice:; Ringer Equivalence Number
– 52 – Federal Communications Commission (FCC) Part 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the front cover of this equipment is a label that contains the FCC registration number and Ringer Equivalence Number (REN). You must provide this info...
Page 53 - IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS; has been disconnected from the phone
– 53 – IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS In the event of telephone operational problems, disconnect the control by removing the plug from the RJ31X (CA38A in Canada) telephone wall jack. We recommend that your certified installer demonstrate disconnecting the phones on installation of t...
Page 54 - SERVICING INFORMATION; Your local Honeywell dealer is:
– 54 – SERVICING INFORMATION Your local Honeywell dealer is the person best qualified to service your alarm system. Arranging some kind of regular service program with him is advisable. Your local Honeywell dealer is: Name: Address: Phone:
Page 55 - OWNER'S INSURANCE PREMIUM CREDIT REQUEST
– 55 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeowner's insurance carrier for possible premium credit. A. GENERAL INFORMATION: Insured's Name and Address: Insurance Company: Policy No.: Lynx Plus Series _________________________________________...
Page 56 - E. SMOKE DETECTOR LOCATIONS
– 56 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS Furnace Room Kitchen Bedrooms Attic Basement Living Room Dining Room Hall F. BURGLARY DETECTING DEVICE LOCATIONS: Front Door Basement Door Rear Door All Exterior Doors 1st Floor Windows All Windows Interior Locations...
Page 57 - THE LIMITATIONS OF THIS ALARM SYSTEM
– 57 – WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a va...
Page 61 - INDEX
– 61 – INDEX 90 .................................................................... 47 A AC .................................................................... 14 Adjusting the volume...................................... 28 Alarm .......................................................... 7, 14 Al...
Page 63 - ONE YEAR LIMITED WARRANTY
– 63 – ONE YEAR LIMITED WARRANTY Honeywell International Inc., acting through its Security & Communications business ("Seller"), 2 Corporate Center Drive, Melville, New York 11747, warrants its security equipment (the "product") to be free from defects in materials and workmanshi...
Page 64 - Corporate Center Drive, Suite 100
2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2009 Honeywell International Inc. www.honeywell.com/security Ê800-03858V1uŠ 800-03858V1 12/09 Rev. A