Honeywell L91F - Manual

Honeywell L91F

Honeywell L91F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

Honeywell

PROPORTIONING

PRESSURETROLCONTROLLERS

PROPORTIONING PRESSURETROL CONTROLLERS ARE

SERIES 90 MODULATING PRESSURE CONTROLLERS THAT

PROVIDE DIRECT CONTROL OF MODULATING MOTORS OR

VALVES USED ON AUTOMATIC BURNERS OR STEAM HEAT-

ING SYSTEMS.

l

Models available for pressure systems up to 300 psi

l

These controllers may be

used with steam, air, noncombust-

ible gases, or other fluids noncorrosive

to

the brass or

bronze (300 psi models) bellows.

l

Wiper on the controller potentiometer moves in response to

pressure changes.

l

D has 2 potentiometers for unison control of 2 motors.

l

has a fixed resistor and a manually-adjusted trim

potentiometer in series with the controller potentiometer; for

special applications in electronic bridge circuits.

l

and F models have an adjustable proportioning

(throttling) range to allow selection of desired pressure control

range.

l

Adjustments are made by screws on top of case.

l

Large, easily-read scaleplates are marked in both customary

(or/in.*, psi, or in. Hg) and metric

or mm Hg) units.

l

Steel case has clear plastic cover so that pressure settings

and potentiometer action can be observed.

l

Fitting with

NPT threads provides rapid installation.

l

Controller can also be surface mounted by screws through

holes (knockouts) in back of case.

SPECIFICATIONS 1

TABLE I-MODELS AVAILABLE

to 300

0 to 15 psi

5 to 150 psi

0.03 to 1.03

0.07

to

2.07

0 to 103

0.03 to 1.03

23176CF

9

Yes
Yes
Yes

30 to 110 psi

1.5 to 12 psi

13 to 52 psi

0.09 to 0.36
0.21 to 0.76

10 to 63

0.09 to 0.36

2413

25 172

225 1551

are marked in both customary

psi, or in. Hg) and Metric

or mm Hg) units.

available with or without steam trap (siphon loop).

‘Includes steam trap (siphon loop).

available with

in. BSP-TR internal threads (British Standard Pipe Threads) for mounting.

models have

resistor and one manually-adjustable trim potentiometer in series with thecontroller potentiometer. Varidus combinations of resistance

values and locations of the fixed resistor and trim potentiometer are available. See Table II.

of active winding is

in.

mm] for Part No.

and in.

mm] for Part No. 23176CF.

Table II for potentiometer part number.

D.A. Form Number 65-0059

@Honeywell Inc. 1966

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Honeywell Models