Page 3 - FCC Compliance Statement; INFORMATION TO THE USER:
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 3 10/11 FCC Compliance Statement INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGI...
Page 4 - National Power Deviation Standards; AUSTRALIA / NEW ZEALAND; GERMANY
________________________________________________________________________________________________________ 4 National Power Deviation Standards AUSTRALIA / NEW ZEALAND COMPONENTS COMPLY WITH THE RELEVANT PORTIONS OF IEC 60950 OR THE APPLICABLE COMPONENT STANDARD OR THE RELEVANT AUSTRALIAN / NEW ZEALAN...
Page 5 - UNITED KINGDOM; Rack Mount Instructions
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 5 10/11 SEV 6533-2.1991, PLUG TYPE 11, L+N 250 V,10 A SEV 6534-2.1991, PLUG TYPE 12, L+N+PE 250 V,10 A IN GENERAL, EN 60309 APPLIES FOR PLUGS F...
Page 7 - Optical and Acoustical Statements; VISIBLE LED STATEMENT; ACOUSTIC NOISE STATEMENT
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 7 10/11 Optical and Acoustical Statements VISIBLE LED STATEMENT The LEDs on this DVR unit are classified as “Class 1 LED Product” in accordance...
Page 8 - Important Safeguards
________________________________________________________________________________________________________ 8 Important Safeguards 1. Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instruction 2. Power Sources – This product...
Page 9 - Damage Requiring Service –; Notes on Handling
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 9 10/11 15. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following c...
Page 11 - WARNING; C A U T I O N; RISK OF ELECTRIC SHOCK; Explanation of Graphical Symbols
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 11 10/11 WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT ...
Page 12 - Contents
Contents ________________________________________________________________________________________________________ 12 Contents 1 Contents ..................................................................................................................................................... 12 2 Introduc...
Page 18 - Introduction; Product Description
Introduction ________________________________________________________________________________________________________ 18 Introduction Product Description The Honeywell Fusion DVR is a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including ...
Page 19 - Features
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 19 10/11 Features Honeywell’s Fusion DVRs include the following features: • Optimized and designed for Microsoft ® Windows 7 Embedded ® • Up to...
Page 20 - Controls and Connections; Front Panel Controls and LEDS
Controls and Connections ________________________________________________________________________________________________________ 20 Controls and Connections Front Panel Controls and LEDS The front panel of the DVR unit contains the devices that will be commonly used for data removal, retrieval, and...
Page 21 - Rear Panel Connectors
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 21 10/11 Rear Panel Connectors The rear panel of the recorder contains the connectors used to attach cameras, sensors, and relays to the record...
Page 23 - Card Configurations
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 23 10/11 Card Configurations 120R IPS 16 Channel 240 IPS 8/16 Channel 240 IPS 32 Channel 480 IPS 16 Channel
Page 25 - 40 IPS 8 Channel H-Series Model
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 25 10/11 240 IPS 8 Channel H-Series Model RCA video out PTZ Audio cable adapter 480 IPS 16 Channel H-Series Model RCA video out PTZ Audio cable...
Page 26 - Getting Started; Identifying Included Components
Controls and Connections ________________________________________________________________________________________________________ 26 Getting Started Identifying Included Components Honeywell’s Fusion DVRs come with a mouse, keyboard, selected software and cables. Identify the following components to...
Page 27 - Keyboard Setup
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 27 10/11 Keyboard Setup To attach the keyboard to the recorder, plug the end of the Keyboard into a USB port located on the back of the machine...
Page 28 - Monitor Setup; Power Setup
Controls and Connections ________________________________________________________________________________________________________ 28 Monitor Setup The recorder has the following connections available to attach a monitor. HDMI Output To TV / Digital Monitor DVI -I Output To TV / Digital Monitor DVI t...
Page 29 - Making Connections; Connecting a Video Source; Channel
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 29 10/11 Making Connections Connecting a Video Source There are different types of Video Sources that can be plugged into the recorder includin...
Page 30 - Connecting Sensors
Making Connections ________________________________________________________________________________________________________ 30 Connecting Sensors Each recorder has up to 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms, door and w...
Page 31 - Looping Outputs; Looping Output Termination
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 31 10/11 Looping Outputs The 8/16 Channel recorders have up to 16 looping outputs. Depending on the destination of the looping outputs, each on...
Page 32 - Connecting a PTZ Camera; Attaching the 4-Pin Adapter; Optional Components
Making Connections ________________________________________________________________________________________________________ 32 Connecting a PTZ Camera Setting up a PTZ Camera is simple. The recorder comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge...
Page 33 - Turning On the Recorder; Turning Off the Recorder
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 33 10/11 Turning On the Recorder Once the cables and adapters have been properly connected it is time to turn on the power. To turn on the powe...
Page 34 - DVR Basics; Setting the Time and Date
DVR Basics ________________________________________________________________________________________________________ 34 DVR Basics Setting the Time and Date 1. Exit to Windows by clicking Exit on the Live View screen and selecting Restart in Windows Mode . (See the Live View screen section later in t...
Page 35 - Accessing the DVR Utility; Importing DVR Settings
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 35 10/11 Accessing the DVR Utility Exporting DVR Settings Exporting DVR settings can help configure multiple DVRs quickly or reconfigure a unit...
Page 36 - Changing Video Format; Live View screen
DVR Basics ________________________________________________________________________________________________________ 36 Changing Video Format 1. Exit to Windows by clicking Exit on the Live View screen then and select Restart in Windows Mode . (See the Live View screen section later in this chapter) ...
Page 37 - Live Camera Options
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 37 10/11 Live Camera Options Right-click a camera on the Live View screen to display these options: • Full Screen • Instant Recording • Search ...
Page 38 - Camera View; Recording Status Indicator; Special Recording
DVR Basics ________________________________________________________________________________________________________ 38 Camera View Recording Status Indicator The camera status for each camera is displayed in the upper right corner on the Video Display Area. The following are the different states for...
Page 39 - Screen Division Buttons; Dual Monitor Camera Display Menu
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 39 10/11 Screen Division Buttons Note When viewing live video from Network Cameras, only 4CH will display at one time.. Quad View Displays came...
Page 40 - Custom Live View Divisions
DVR Basics ________________________________________________________________________________________________________ 40 Custom Live View Divisions Customize your Live View screen by changing the order of the cameras. Each screen division can be individually customized but a camera can only be display...
Page 41 - Setup Options; Setup Overview
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 41 10/11 Setup Options Setup Overview The Setup options allow optimization of the DVR by adjusting things like camera names, recording schedule...
Page 42 - Setup Screen
Setup Options ________________________________________________________________________________________________________ 42 Setup Screen Camera Setup Assign names to each camera, adjust color and brightness. Network Video Register and add network video devices, and adjust basic settings. Motion Create...
Page 43 - Camera Setup; Set Up New Camera
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 43 10/11 Camera Setup Set Up New Camera 1. Attach camera to the rear of the DVR chassis. 2. Click Setup on the Live View screen. 3. Click Camer...
Page 44 - Network Video; Connecting a Network Device; Connecting Manually
Setup Options ________________________________________________________________________________________________________ 44 Network Video Connecting a Network Device Note Refer to the EQUIP Series Network IP camera user guide for detailed information on setting up that camera using the Honeywell IP Ut...
Page 45 - Connecting with Camera Finder; Assigning a Network Device to a Channel
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 45 10/11 Connecting with Camera Finder 1. From the Live View screen, click Setup . 2. Click the Network Video tab. 3. Click the Add/Remove Devi...
Page 46 - Assigning Audio Channels to a Network Device
Setup Options ________________________________________________________________________________________________________ 46 Assigning Audio Channels to a Network Device 1. From the Live View screen, click Setup . 2. Click Network Video. 3. Click the Audio Setup tab. 4. Click an available audio channel...
Page 47 - Camera Configuration; Enable/Disable Live Video; Displaying More Columns
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 47 10/11 Camera Configuration The Camera Configuration tab displays information on all cameras (analog and network) connected to the Fusion rec...
Page 48 - Accessing the Configuration Menu; Motion Setup; Regular Interval Recording
Setup Options ________________________________________________________________________________________________________ 48 Accessing the Configuration Menu Use the Fusion interface to access basic network device menu functions. 1. From the Live View screen, click Setup . 2. Click Network Video . 3. C...
Page 50 - General Setup
Setup Options ________________________________________________________________________________________________________ 50 General Setup Function Beep on Login Fail Enables the DVR to beep continuously in response to a failed login attempt. Only an authorized login will stop the beeping. Sequence Set...
Page 51 - Enabling Intensive Recording
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 51 10/11 Voice Warning The recorder allows users to play a sound file when either a Motion event or Sensor event occurs. This file can be a cus...
Page 52 - Video Loss Alarm; Volume
Setup Options ________________________________________________________________________________________________________ 52 Video Loss Alarm The DVR supports a Video Loss Alarm function which allows an Alarm Event to occur when a camera loses its signal. The lost signal can be due to camera power fail...
Page 54 - Auto Sequence Setting; Create Custom Auto Sequence
Setup Options ________________________________________________________________________________________________________ 54 Auto Sequence Setting Auto Sequencing is available either in the Live View screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is used to display on a ...
Page 55 - Frame Setup
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 55 10/11 Frame Setup The Frame Setup menu allows configuration of the IPS, resolution, quality, and sensitivity of camera channels. When config...
Page 56 - Standard Models
Setup Options ________________________________________________________________________________________________________ 56 Standard Models Note Using H.264 software compression significantly increases the processing load on the Fusion recorder. If maximum analog IPS is desired in addition to IP video...
Page 58 - Maximum IPS Table; 2 Channel Frame Allocation
Setup Options ________________________________________________________________________________________________________ 58 Maximum IPS Table IPS Breakdown for Each Resolution (NTSC) Resolution CCTV 480 IPS Models 240 IPS Models H-Series Models 360x240 1CIF 480 IPS 240 IPS 480 IPS 720x240* 2CIF 240 IP...
Page 59 - Schedule Setup
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 59 10/11 Schedule Setup Creating a customized schedule is important to maximize the efficiency of the DVR. The Fusion DVR offers numerous optio...
Page 60 - Default Schedules; Day of the Week; The schedule will be as follows:
Setup Options ________________________________________________________________________________________________________ 60 Default Schedules Default Schedule 1 All cameras are set to: 8AM-5PM. Continuous recording 5PM-8AM Motion recording Default Schedule 2 All cameras are set to: Motion recording 24...
Page 64 - Scheduling Sensors and Relays (By Example); The schedule example will be as follows:
Setup Options ________________________________________________________________________________________________________ 64 Scheduling Sensors and Relays (By Example) It is easy to add advanced recording functionality using Sensor Inputs and Relay Outputs. SENSOR - Sensor Inputs can be programmed to i...
Page 68 - Verifying a Recording Schedule
Setup Options ________________________________________________________________________________________________________ 68 Verifying a Recording Schedule 1. Select a single day of the week using the selection check box to the left of the specified day. 2. Identify the schedule (or schedules) that hav...
Page 69 - Sensor Setup; Configure Sensor Response
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 69 10/11 Sensor Setup The Sensor setup window allows you to enable, disable and configure Sensors and Relays (Control Outputs). Configure Senso...
Page 72 - Administration
Setup Options ________________________________________________________________________________________________________ 72 Web Function HTTP Port Used to transfer the DVR Interface via the Internet to the Web Viewer. Default 80. Internet Port Used for Data communication between the DVR and the Web Vi...
Page 73 - Disk Management
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 73 10/11 Disk Management The Disk Management window is a native Windows function. This window displays the partition scheme and health status o...
Page 74 - Setting up DDNS; Enable DDNS
Setup Options ________________________________________________________________________________________________________ 74 Setting up DDNS Dynamic Domain Name System (DDNS) is a service that provides a static address to simplify remote connection to the recorder. This service is most useful for insta...
Page 75 - User Management; Add a New User
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 75 10/11 User Management The User Management Console allows the administrator to create, edit, and delete user accounts. Each user account can ...
Page 76 - User Rank; Changing the Administrator Password; Default Administrator Password; Log Management
Setup Options ________________________________________________________________________________________________________ 76 User Rank The User Ranking structure allows the option to assign a privilege system (1-10 where one has the most rights) to users of the recorder Software. For example. Since onl...
Page 77 - Set up Log Management Options
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 77 10/11 Set up Log Management Options 1. From the Administration tab, click Log Management . 2. Select the check box to enable the Log File Ov...
Page 78 - Status Check / Email
Setup Options ________________________________________________________________________________________________________ 78 Status Check / Email General 1. Click Setup on the Live View screen. 2. Click the Administration tab. 3. Click Status Check/Email . 4. Select the Enable Email Alarm check box. 5....
Page 80 - Data Management
Setup Options ________________________________________________________________________________________________________ 80 SMART Alert 1. Set up the General and Users tabs first. (see previous sections) 2. Select the Enable SMART Alarm check box. 3. Define the number hours between SMART checks. 4. Se...
Page 81 - Information
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 81 10/11 Information The Information display allows users to define the site code necessary for connecting to remote software, save comments re...
Page 82 - Activate Instant Recording
Setup Options ________________________________________________________________________________________________________ 82 Instant Recording The Instant Recording feature allows users to manually initiate recording on a specific camera, overriding the current schedule. When Instant Recording is activ...
Page 83 - Search Overview
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 83 10/11 Search Search Overview The recorder has several options that allow the user to easily search through, and find, a particular section o...
Page 84 - Play Controls; Hour / Minute Controls
Search ________________________________________________________________________________________________________ 84 Play Controls Back Frame Moves video back one frame. Rewind Rewinds video. Play Plays video. Forward Frame Moves video forward one frame. Stop Stops video playback Hour / Minute Control...
Page 86 - Performing a Basic Search
Search ________________________________________________________________________________________________________ 86 Time Sync The Time Sync option synchronizes a single channel of video to playback in real time. Ordinarily the video may playback slower or faster depending on several factors, includin...
Page 89 - Bookmarks; Modify Bookmarks
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 89 10/11 Bookmarks Use bookmarks to mark a video clip during a search. Export bookmarked data using the Clip Backup feature. 1. Perform a searc...
Page 91 - Performing an Index Search
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 91 10/11 Index Search Using the Index Search can greatly decrease the amount of time spent searching through saved video. The Index Search allo...
Page 92 - Preview Search
Search ________________________________________________________________________________________________________ 92 Preview Search Preview Search can be used in a number of circumstances to quickly find an exact moment where an event, such as a theft, occurred. The Preview Search gives a 24 Hour visu...
Page 93 - Performing a Preview Search; Object Search
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 93 10/11 Performing a Preview Search 1. Select a single camera by either turning off all cameras but one or double-clicking a displayed image. ...
Page 94 - Performing an Object Search
Search ________________________________________________________________________________________________________ 94 Performing an Object Search 1. Perform a Basic Search. See the instructions on Performing a Basic Search. 2. Select a single camera, either by turning off all cameras but one or by doub...
Page 95 - Status Search; Performing a Status Search
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 95 10/11 Status Search The Status Search option displays video in graph format. (16 Channel Model Show) Performing a Status Search 1. Click Sta...
Page 96 - Motion Search; Performing a Motion Search
Search ________________________________________________________________________________________________________ 96 Motion Search The Motion Search provides a dynamic display of the levels of motion in recorded video. Adjust the level of motion to only play clips of video at or above that level. Tip ...
Page 97 - Audio Playback
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 97 10/11 Audio Playback Audio is played back at 48,000Hz. To play audio with the video: 1. Select a single camera by turning off all cameras bu...
Page 98 - Setting up a PTZ Camera
Pan / Tilt / Zoom ________________________________________________________________________________________________________ 98 Pan / Tilt / Zoom Pan / Tilt / Zoom Overview The PTZ controls within the recorder allow for powerful control over the cameras. This can be extremely beneficial by increasing ...
Page 99 - Enable the PTZ Settings
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 99 10/11 Enable the PTZ Settings 1. Inside the recorder PTZ Setup, select the PTZ camera using the Camera Channel list. 2. Enable the PTZ funct...
Page 100 - Advanced PTZ Setup; Creating and Viewing Preset Positions
Pan / Tilt / Zoom ________________________________________________________________________________________________________ 100 Advanced PTZ Setup Note Preset and Tour options may vary depending on the camera Creating and Viewing Preset Positions A Preset Position is a user-defined location where the...
Page 101 - Viewing a Preset; Understanding Tours
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 101 10/11 6. Enter a Dwell Time and Speed Setting. This is used for the Tour 2 function (Each preset can have a different Dwell and Speed setti...
Page 103 - PTZ Status on Close; Activating the PTZ Status on Close Option; PTZ Tour Scheduling; Create PTZ Tour Schedule
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 103 10/11 PTZ Status on Close The PTZ Status on Close option defines the default settings for a PTZ camera when the controller is not open. Thi...
Page 104 - Opening and Editing the Honeywell MAXPRO Menu
Pan / Tilt / Zoom ________________________________________________________________________________________________________ 104 PTZ Address Setting Some protocols support software address settings. The RX Addresses and ID settings are compatible with a particular line of receivers that support 2 ID a...
Page 105 - Controlling a PTZ Camera; Using the On-Screen Compass
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 105 10/11 Controlling a PTZ Camera Fusion DVRs provide control of PTZ cameras in two different ways. • Using the Graphical PTZ controller that ...
Page 106 - Using the PTZ Controller; AUX Buttons
Pan / Tilt / Zoom ________________________________________________________________________________________________________ 106 Using the PTZ Controller • Use the Arrow buttons to control the direction of the PTZ camera. • To select a new camera, click the video display of a different camera on the M...
Page 107 - Backing up Video Data; Backup Overview; Nero
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 107 10/11 Backing up Video Data Backup Overview The Backup Center allows you to back up recorded video data from multiple dates and times to on...
Page 108 - General Screen Overview; Performing a General Backup
Backing up Video Data ________________________________________________________________________________________________________ 108 General Screen Overview The General Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, or periods, to a specified s...
Page 109 - Clip Screen Overview; Performing a Clip Backup
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 109 10/11 Clip Screen Overview The Clip Screen is used for backing up video recorded by individual cameras for a selected period of time to a s...
Page 110 - Scheduled Screen Overview; Performing a Scheduled Backup
Backing up Video Data ________________________________________________________________________________________________________ 110 Scheduled Screen Overview The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, on a regular scheduled b...
Page 111 - LAN Overview
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 111 10/11 LAN / ISDN / PSTN Connections LAN Overview The recorder can be easily connected to a Local Area Network (LAN) and uses Microsoft’s ® ...
Page 112 - Connecting to a LAN Using TCP/IP; Configuring TCP/IP Settings
LAN / ISDN / PSTN Connections ________________________________________________________________________________________________________ 112 Connecting to a LAN Using TCP/IP The networking options of the recorder can create and edit all Network settings available on Windows Embedded 7. The recorder co...
Page 113 - LDAP Integration
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 113 10/11 LDAP Integration Features The instructions below are for LDAP Integration with Server Software version 3.6.36 and above. • The record...
Page 114 - Installing LDAP
LDAP Integration ________________________________________________________________________________________________________ 114 Installing LDAP Required Items • Name of LDAP server. • Account in LDAP server that has Domain Admin rights. This user will be used initially to create the OU’s and Groups wi...
Page 116 - Web Viewer; Web Viewer Overview
Web Viewer ________________________________________________________________________________________________________ 116 Web Viewer Web Viewer Overview The web viewer is the ideal way to connect to the DVR for anyone who only needs to view live cameras. It is compatible with Internet Explorer 6.0 and...
Page 117 - Configuring the Server for Remote Connection; Connecting to a DVR Using Web Viewer; Closing the Web Viewer
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 117 10/11 Configuring the Server for Remote Connection 1. Enter Setup on the DVR. 2. Click the Network Setup tab. 3. Clear the Disable Remote C...
Page 118 - Included Software Setup; Proprietary Viewer Overview
Included Software Setup ________________________________________________________________________________________________________ 118 Included Software Setup Proprietary Viewer Overview The Proprietary Viewer plays back the exported video in its proprietary format. Video saved in this format is extre...
Page 119 - Installing the Proprietary Viewer; Loading Video from DVD-ROM or Hard Drive
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 119 10/11 Installing the Proprietary Viewer 1. Insert the Software Installation CD into the CD-ROM. (Do not install on the DVR.) 2. Select the ...
Page 120 - Digital Verifier Overview; Installing the Digital Verifier
Included Software Setup ________________________________________________________________________________________________________ 120 Digital Verifier Overview .JPG images and .AVI video files that are exported from the Digital Video Recorder are automatically embedded with a digital signature. Digit...
Page 121 - Alarm Monitor Overview; Installing the Alarm Monitor
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 121 10/11 Alarm Monitor Overview The Alarm Monitor software is a utility that streams video across a Local Area Network to a Client PC when an ...
Page 122 - Configuring the Client PC
Included Software Setup ________________________________________________________________________________________________________ 122 Configuring the Client PC All configurations take place in the Alarm Monitor Window on the client PC. For descriptions and locations of the buttons and features of the...
Page 123 - Alarm Monitor Window; Filter Event List
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 123 10/11 Alarm Monitor Window Filter Event List 1. Select a DVR from the Server list under Filter Options. 2. Select the Date to include. 3. S...
Page 124 - Search Alarm Window; View Recorded Video
Included Software Setup ________________________________________________________________________________________________________ 124 Search Alarm Window Export Quality It may be necessary to reduce the overall size of an .AVI file; for example, to email to someone. .AVI file sizes can be reduced by ...
Page 125 - Fusion Remote Software Overview
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 125 10/11 Fusion Remote Software Overview The DVR was specifically designed to be fully operated and maintained remotely. It connects using the...
Page 126 - Installing the Fusion Remote Software
Included Software Setup ________________________________________________________________________________________________________ 126 Remote Client Minimum Requirements • Windows® 7, Vista or XP Operating System • Intel Dual Core • 1 GB RAM • 256 MB+ NVIDIA or ATI Video Card • DirectX 9 or Higher • 2...
Page 127 - Setting up the Server to Accept Incoming Communications
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 127 10/11 Setting up the Server to Accept Incoming Communications In order to access the DVR remotely, the DVR Server must be setup to allow re...
Page 128 - Setting up the Fusion Remote Software; Creating a New Remote Connection
Included Software Setup ________________________________________________________________________________________________________ 128 Setting up the Fusion Remote Software Creating a New Remote Connection 1. Select Start > Programs > Fusion > Fusion Remote. 2. Click New to open the Site Info...
Page 129 - FVMS Overview; FVMS System Requirements
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 129 10/11 FVMS Overview FVMS software is Multi-Site Management Software; a powerful utility that allows 100 or more DVRs to be controlled using...
Page 130 - Connecting to a DVR
Included Software Setup ________________________________________________________________________________________________________ 130 Configuring the Server for Remote Connection 1. Enter Setup on the DVR. 2. Click the Network tab. 3. Clear the Disable Remote Control check box. Note If you are using ...
Page 131 - Health Check; Enable Health Check on the Fusion DVR
Fusion IV DVR User Guide ________________________________________________________________________________________________________ Document 800-05305V1 Rev B 131 10/11 Health Check FVMS Health Check is used to monitor the status of Network, Video, Recording, and HDD storage space on remotely connecte...
