Honeywell IS220 - Manual

2 Case Dimensions Figure 1. Case Dimensions Specifications subject to change without notice. Maintenance Smudges and dirt on the unit’s window can interfere with the unit’s performance. If the horizontal or vertical output windows require cleaning, use only a mild glass cleaner containing no ammonia...

3 Scanner Components Figure 2. Scanner Components No. Description  Hardened Glass Window (Laser Aperture)  Black Metal Housing  15-pin, Male D-Sub Connector for Communication/Power Cable Connection  Two, PEM B-M5-2 Mounting Holes Provided  Red and Green LED  Diagnostic Indicator Display (Two-D...

5 Indicators Audible Indicators When the IS220 is in operation, it provides audible feedback. These sounds indicate the status of the scan engine. One Beep The scan engine will beep once when it first receives power, the red LED will flash and the scanner will beep once. The red LED will remain on f...

7 Diagnostic Indicator Display There is a two-digit error code display located on the center printed circuit board (see illustration below). The following is a list of possible error codes and their meanings. Some errors will require immediate scanner maintenance. Error Code Description 01 Reserved ...

9 Depth of Field Figure 6. Depth of Field Specifications subject to change without notice.

11 Troubleshooting Guide The following guide is for reference purposes only. Contact a customer service representative to preserve the limited warranty terms. SYMPTOMS POSSIBLE CAUSE(S) SOLUTION No LEDs, No beep or No motor spin. No power is being supplied to the scanner. Check the transformer, outl...

15 Design Specifications Operational Light Source: Two, Visible Laser Diodes @ 650 nm Laser Power: 1 mW per VLD Scan Pattern: 10 fields of 4 parallel lines (for ladder and picket fence) Number of Scan Lines: 40 Scan Speed: 4000 scan lines per second +/- 5% Depth of Scan Field, Near: 115 mm (4.5"...

16 Environmental Temperature: Operating = 0°C to 40°C (32°F to 104°F) Storage = -40°C to 60°C (-40°F to 140°F) Humidity: 5% to 95% relative humidity , non-condensing Contaminants: Sealed to resist airborne particulate contaminants Ventilation: None required Specifications subject to change without n...

17 Upgrading the Flash ROM Firmware The IS220 is part of Honeywell’s line of scanners with flash upgradeable firmware. The upgrade process requires, a new firmware file supplied to the customer by a customer service representative and MetroSet2 software  . A personal computer running Windows 95 or ...

19 Default Settings Communication Parameters Many functions of the scanner can be "configured" - that is, enabled or disabled. The scanner is shipped from the factory configured to a set of default conditions. The default parameter of the scanner has an asterisk ( * ) in the charts on the fo...

25 Scanner and Cable Terminations Scanner Pinout Connections Standard 15-pin, Male D-Sub Pin Function 1 Shield GND 2 TXD 3 RXD 4 DTR 5 GND 6 DSR 7 CTS 8 RTS 9 External LED 10 +5V 11 +5V 12 GND 13 GND 14 Earth Ground 15 External Beeper Cable Connector Configurations 52-52548 and 52-52547 Communicatio...

27 Limited Warranty Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materials and workmanship and to conform to HII’s published specifications applicable to the products purchased at the time of shipment. This warranty does not c...

29 Laser and Product Safety Cautions Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Under no circumstances should the customer attempt to service the laser scanner. Never attempt to look at the laser...

30 Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipmen...

31 Index A Accessories ........................................................... 1 Application ............................................................. 7 Audible Indicators .......................................... 11–13 B Beeper ....................................................... 5, 19–...

33 Customer Support Technical Assistance If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support office: North America/Canada Telephone: (800) 782-4263 E-mail: [email protected] Latin America Telephone: (803) 835-8000 T...

34 Product Service and Repair Honeywell International Inc. provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning ...