Honeywell Hyperion 1300 g - Manual
Honeywell Hyperion 1300 g – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Note: For additional RS485 interface selections, see the User’s
- Page 5 – Keyboard Country; Scan the; Program Keyboard Country; bar code below, then scan; Save; Country Code
- Page 6 – Trigger; The following bar codes will allow you to use the reader in Manual; Reread Delay; This sets the time period before the scanner can read the; same; bar
- Page 7 – Suffix; If you want a carriage return after the bar code, scan the; Add CR; . To add a tab after the bar code, scan the; Add Tab; bar code to; Add Code ID Prefix to all Symbologies; Note: For a complete list of Code IDs, see the User’s Guide for your
- Page 8 – Data Format Editor Instructions; for Primary Format; to save your entries.
- Page 9 – Programming Chart
- Page 11 – Refer to; User Documentation
Hyperion 1300g
Linear Scanner
Quick Start Guide
HP1300-QS Rev A
12/10
pour le français.
per l'italiano.
für Deutsch.
Ir a
para español.
Para Português, acesse
.
Перейти
на
русскоязычный
сайт
日本語 :
をご覧ください。
简体）
。
한글
로
이동합니다
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Reading Techniques Standard Product Defaults The following bar code resets all standard product default settings. RS485 Interface The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to program the terminal, then power cycle the cash...
Keyboard Country Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from the end of this document, then the Save bar code to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than t...
Trigger The following bar codes will allow you to use the reader in Manual Trigger mode (need to press the trigger to read), Automatic Trigger mode (the beam is always on), or Presentation mode (the reader is activated when it “sees” a bar code). Reread Delay This sets the time period before the sca...
