Page 2 - ii; ISSUE DATE; Initial Release
Rev. 1.01 ii 900.0800 19-Jun-06 ISSUE DATE REVISIONS 900.0394 1.0 February 2006 Initial Release 900.0800 1.0 June 2006 Correct power supply part # and voltage 1.01 June 2006 Correct RS232 wiring
Page 3 - FCC COMPLIANCE STATEMENT; INFORMATION TO THE USER:; This equipment has been tested and found to comply
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is opera...
Page 4 - IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS – All safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS – All warnings on the unit and in the operating instr...
Page 6 - CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,; C A U T I O N; RISK OF ELECTRIC SHOCK; WARNING; TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock...
Page 7 - vii; TABLE OF CONTENTS
Rev. 1.01 vii 900.0800 19-Jun-06 TABLE OF CONTENTS SECTION 1: INTRODUCTON ................................................................................................................... 1 1.1 PRODUCT DESCRIPTION .......................................................................................
Page 8 - viii; TABLE OF CONTENTS, CONTINUED
Rev. 1.01 viii 900.0800 19-Jun-06 TABLE OF CONTENTS, CONTINUED 5.2.8 List VectorScan Contents .............................................................................................. 32 5.2.9 Program a Tour...........................................................................................
Page 9 - ix
LIST OF FIGURES, CONTINUED Figure 6. HEGS5000 Icon Overlay ................................................................................................................. 19 Figure 7. MUX Mode English Text Version .......................................................................................
Page 11 - INTRODUCTON; DESCRIPTION
SECTION 1: INTRODUCTON 1.1 PRODUCT DESCRIPTION The HEGS5000 is a controller designed to provide simple operation of the Honeywell KD6/HD6 series domes, VCRs, and multiplexers: 16 multiplexers, 16 VCRs and 256 domes can be controlled via the HEGS5000’s two serial ports. All functions of the individua...
Page 13 - INSTALLATION AND EQUIPMENT SETUP; Description; Used for controlling Honeywell KD6/HD6 series domes.
SECTION 2: INSTALLATION AND EQUIPMENT SETUP 2.1 CONNECTIONS A terminal block is provided for connection between the HEGS5000 controller and peripheral equipment. A coiled cable is provided for connection between the HEGS5000 and the terminal block. Plug one end of the coiled cable into the connector...
Page 14 - DIAGRAMS; VCR
2.2 INSTALLATION DIAGRAMS Input Input Cam 16 Cam 1 Output Output Spot Spot Monitor Main Monitor Main RS-485 PSU 12 VDC 2A RS-232 HEGS5000 System Controller VCR KX1610CN Multiplexer 2 - RX (data in)5 - Ground 2 - RX (data in)5 - Ground RS-232 RS-232 +12VDC GND RS-232 (TX) RS-232 (RX) RS-485 (D+) RS-4...
Page 15 - Figure 2: Connection Diagram 1
2.2 INSTALLATION DIAGRAMS, CONTINUED +12VDC GND RS-232 (TX) RS-232 (RX) RS-485 (D+) RS-485 (D-) KD6 / KD6Z Dome -32 KD6 / KD6Z Dome - 1 5 5 1 1 9 9 6 6 6 6 9 9 1 1 5 5 DB-9 Female rear view of connector DB-9 Male rear view of connector DB-9 Male rear view of connector DB-9 Female rear view of connec...
Page 16 - Figure 3: Connection Diagram 2
2.2 INSTALLATION DIAGRAMS, CONTINUED +1 2 V D C +12V DC GN D GN D R S -2 3 2 (T X ) R S -2 3 2 (T X ) R S -2 3 2 (R X ) RS -2 32 ( RX ) RS-232 VCR cable connections RS-232 MUX cable connections R S -4 8 5 (D + ) RS -4 85 ( D+) R S -4 8 5 (D -) RS -485 ( D- ) 1 5 6 9 9 6 RS-232 to VCR RS-232 to MUX T...
Page 17 - SETUP; The multiplexer should be set up as follows:; Setup
Rev. 1.01 7 900.0800 19-Jun-06 2.3 EQUIPMENT SETUP 2.3.1 KD6/HD6 Setup The KD6/HD6 Dome must be set to Honeywell Diamond protocol. The address of the KD6/HD6 dome must be set to match the address set for that camera number in the HEGS5000. That is, the KD6/HD6 camera defined as camera 1 in the HEGS5...
Page 19 - MODES OF OPERATION; KDZ series domes have been discontinued.; CONFIGURATION; Booting in 5s
SECTION 3: MODES OF OPERATION 3.1 MODES OF OPERATION There are two modes of operation when using the HEGS5000 as a standalone controller: 1. HEGS5000 = Standalone = PTZ control (KD6/HD6 and KDZ series) only. Note: KDZ series domes have been discontinued. 2. HEGS5001 = MUX Mode = MUX/VCR control capa...
Page 20 - Enter; Master
3.2 MODE CONFIGURATION, CONTINUED 3. Press or keys to scroll through the available options. • Standalone (control KD6/HD6 PTZs only) • Mux Mode (control multiplexers, VCRs, and KD6/HD6 PTZs) • System Mode (must be used with HSX3208L switcher) • Stdalone/Mux Fw. (upload new firmware to the HEGS50...
Page 21 - Password; Description Operator; Display
3.3.1 Default Password Master Default Password is 1994. Operator Default Password is 1111. Master mode has access to all menus. Operator mode allows access to all menus except those in which changes to system setup are involved. The table below shows which menus and functions are available for each ...
Page 22 - Out
3.3.4 Log Out To log off the controller, perform the following steps. 1. Press the Run Menu ( Run 1. ___ 3. ___ ) key until Logout is displayed on the LCD display. 2. Press Enter ( ) . Yes is displayed on the LCD display. 3. Press Enter ( ) to select Yes or press Menu ESC ( 1. ____2. ____3. ____ ) t...
Page 23 - SYSTEM SETUP; SETTING UP THE CONTROLLER; Sys; Mux’s
SECTION 4: SYSTEM SETUP 4.1 SETTING UP THE CONTROLLER The components controlled by the HEGS5000 are defined in the SYSTEM MENU. This menu is available only when logged in as a Master User. • The SYSTEM MENU is in tree structure. • Several tools, including the LEFT ( ) and RIGHT ( ) keys, Enter k...
Page 29 - STANDALONE MODE; Figure 5. HEGS5000 English Text Overlay; The; Monitor; ) is not used in the standalone mode except as a; Menu
SECTION 5: STANDALONE MODE HEGS5000 5.1 OPERATION When the HEGS5000 Controller is in Standalone Mode, a user can control and program KD6/HD6 PTZ cameras. The KD6/HD6 PTZ cameras must be defined in the HEGS5000 as defined in Section 2.3.1 and 4.3. There are two overlays, English text version and Icon...
Page 30 - Control
5.1.1 Camera (KD6/HD6) Selection To select a camera for control: 1. Enter the camera number (1-256) using the numeric keypad. 2. Press the Camera ( ) key. 5.1.2 Manual Control Table 1. Manual Control Function Description Pan/Tilt Use the joystick to control (pan and tilt) the camera. Move the joysti...
Page 31 - Press the; Freeze; Video
Table 1. Manual Control, Continued Function Description Freeze Video ( ) Press the Freeze Video ( ) key to freeze or unfreeze the current video scene. When the video is frozen, an asterisk is displayed in the bottom left corner of the display and the camera remains on the current scene until the ope...
Page 34 - UltraDome HD6i; Use the; Menu Esc; ) key to exit the menus on the
5.2.1 Dome Setup Menu, Continued The on-screen menu is displayed on the monitor where the KD6/HD6 video is viewed. 518584-2980 Rev X 1 Language ...............English 2 Display Options 3 Control Options 4 Diagnostic Options 5 Camera Options 6 Function Programming ESC TO EXIT UltraDome HD6i To access...
Page 35 - PreShot
5.2.2 Program PreShot There are two methods for programming and saving PreShots. The first method quickly saves the current camera scene and assigns a predefined title. For example, PreShot 1 is titled PS1, PreShot 2 is titled PS2, etc. The second method allows the user to program a 24-character tit...
Page 36 - Continued; Character Select
5.2.2 Program PreShot, Continued 6. Press the Enter ( ) key. The following is displayed on the controller’s LCD. Rev. 1.01 26 900.0800 19-Jun-06 Follow the on-screen prompts that appear on the monitor where the KD6/HD6 video is viewed. 7. Enter the PreShot number (0-99) using the numeric keypad and ...
Page 41 - VectorScan Commands; Edit; VectorScan
5.2.5 Programming a VectorScan, Continued 13. Press Enter ( ) when finished adding PreShots. The following commands are displayed on the bottom of the monitor. VectorScan Commands E= Edit Press + or – key until E is displayed on LCD and press Char Select. Reposition the PTZ and/or change the lens se...
Page 42 - VectorScans
5.2.7 List VectorScans To view a list of the programmed VectorScans: 1. Press the Dome Menu ( 1. ___ 3. ___ ) key. 2. Press + or – until VectorScan Menu is displayed on the LCD and press Enter ( ). 3. Press + or – until List is displayed on the LCD and press Enter ( ). The VectorScan list, including...
Page 43 - Tour
5.2.8 List VectorScan Contents, Continued 5. When finished viewing the VectorScan contents, press Enter ( . 6. To exit the menu on the LCD controller, press Dome Menu ( 1. ___ 3. ___ ) or press the Menu Esc ( 1. ____2. ____3. ____ ) key until the LCD display is cleared of all menus. 5.2.9 Program a ...
Page 45 - to Edit Sector; save Sector coordinates
5.2.12 Programming Sector IDs, continued 8. Enter the Sector title (up to 24 characters) a. Press the + or – key until the desired character is displayed on the LCD screen, and then press Character Select ( ABC ). The controller sends the character to the KD6/HD6. b. Continue selecting characters an...
Page 47 - to Edit the Title
5.2.13.1 Programming/Editing/Deleting Privacy Zones, Sony Camera, Continued a. Press the + or – key until the desired character is displayed on the LCD screen, and then press Character Select ( ABC ). The controller sends the character to the KD6/HD6. b. Continue selecting characters and press Chara...
Page 48 - save Privacy coordinates
5.2.13.1 Programming/Editing/Deleting Privacy Zones, Sony Camera, Continued 12. Press + or – until the character for the desired action is displayed on the LCD and then press Character Select ( ABC ). To save Privacy coordinates , press + or – until S is displayed on the LCD and press Character Sele...
Page 52 - To toggle between standard operation and nightshot, press the; continuously until; Nightshot; is displayed and press
5.2.14 Nightshot Mode The nightshot feature is only available on KD6/HD6 models with the following cameras: 843216-1011 Sony Color NTSC w/4.1-73.8mm, IR 843216-1013 Sony Color PAL w/4.1-73.8mm, IR 843216-0984 Hitachi Color NTSC Camera w/3.6- 82.8mm, IR 843216-0985 Hitachi Color PAL Camera w/3.6-82.8...
Page 53 - MUX MODE OPERATION; Figure 7. MUX Mode English Text Version; Figure 8. MUX Mode Icon Version
SECTION 6: MUX MODE OPERATION HEGS5001 6.1 INTRODUCTION In the MUX mode of operation, the HEGS5001 is capable of controlling multiplexers, VCRs, and KD6/HD6 PTZ cameras. Refer to Section 5 for information on controlling the KD6/HD6 PTZ cameras. There are two overlays, English Text version and Icon V...
Page 54 - or; to select the next or previous spot; SPOT MONITOR OPERATION; Camera
6.1 INTRODUCTION, CONTINUED The initial display after a user logs on the controller is shown below. The operator has control of camera 1 and Spot Monitor 1 (multiplexer 1). Tip: Press + and – to select the next or previous camera. Tip: Press Monitor ( ) followed by + or - to select the next or previ...
Page 56 - CONTROL; ICON
6.3 MULTIPLEXER CONTROL The HEGS5001 controller sends basic commands to the multiplexer to simulate pressing the buttons on the front panel of the multiplexer. Refer to the Multiplexer User Manual for details on the operation of the multiplexer. ICON KEY DESCRIPTION MUX Press once to send a single m...
Page 59 - DOWNLOADING NEW FIRMWARE TO THE HEGS5000; for correct download cable connections.; the; password (if it has not been changed the default Master password
SECTION 7: DOWNLOADING NEW FIRMWARE TO THE HEGS5000 7.1 INTRODUCTION New firmware for the HEGS5000 and HEGS5001 controllers can be downloaded through the RS-232 port. This is done through a simple windows program called Ultrak Code Server. To download the latest version of the Code Server, visit the...
Page 60 - DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED; Figure 9: Ultrak Code Server Window
7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 5. Press . The controller will clear the memory and, when ready to download, will display the message “ Begin Download.” The HEGS5000 is now waiting for data from the PC. 6. From the START bar on your PC, Select Programs → Ultrak → Ultrak Code ...
Page 61 - Red Dot; Figure 11: Enabling the CommPort
7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 8. Click on the red dot on the right of the dialog box to enable the port. Red Dot Figure 11: Enabling the CommPort If the port is unavailable you will get an “Invalid port number” error message. This is because the port is being used by anothe...
Page 62 - Click on the Transmit Hex File Icon; Figure 14: Send Hex File Window
7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 10. Click on the Transmit Hex File Icon to bring up the Send Hex File window. Note: the hex file is located where you selected to save the Ultrak Code Server during the download process in Section 7.1. Figure 14: Send Hex File Window 11. Double...
Page 63 - transmitted and the progress of the download. “; Download Busy”; appears on the; Figure 16: Sending Hex File Status Window; window will display and the HEGS5000 will; Figure 17. Transfer Complete
7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 12. Select the latest version of the firmware (e.g. 519686-1980_A_HEGS5000-5001.hex) and click OPEN. The Sending Hex File window displays, indicating the file being transmitted and the progress of the download. “ Download Busy” appears on the H...
Page 65 - TROUBLESHOOTING AND MAINTENANCE; To exit the joystick test mode, hold the VectorScan (
SECTION 8: TROUBLESHOOTING AND MAINTENANCE 8.1 TROUBLESHOOTING If problems occur at the initial installation phase, verify the unit is installed correctly and the connectors are seated fully into the interconnecting equipment. Because this unit is just one part of an overall system, it may be necess...
Page 66 - SERVICING THE CONTROLLER; SERVICEABLE PARTS. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.; MAINTENANCE; Periodically perform the following:
Rev. 1.01 56 900.0800 19-Jun-06 8.3 SERVICING THE CONTROLLER If problems still exist after verifying correct installation and the problem has been isolated to the controller, then it must be removed for servicing. THERE ARE NO USER- SERVICEABLE PARTS. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. 8.4...
Page 67 - SPECIFICATIONS; Extruded aluminum
Rev. 1.01 57 900.0800 19-Jun-06 SECTION 9: SPECIFICATIONS Input Voltage 9-12V dc Power 6W Controls Push-button switches with backlit LCD display Rate-proportional 3-axis joystick Pan/Tilt Functions Pan left, pan right, tilt up, tilt down Zoom Lens Functions Zoom in, Zoom out, Focus near, Focus far, ...
Page 68 - Video Systems
Honeywell Video Systems (Head Office) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 www.honeywellvideo.com TEL+1-800-796–2288 Honeywell Video Systems Northern Europe Netwerk 121 1446 TR Purmerend, The Netherlands www.SecurityHouse.nl TEL +31.299.410.200 Honeywell Security Australia Pty Ltd....
