Honeywell HE160- Manual
Honeywell HE160– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Determining Best Location for Humidifier; Selecting Water Supply Location; INSTALLING HUMIDIFIER; WARNING
- Page 3 – CONNECTING PLUMBING
- Page 4 – CAUTION; IMPORTANT
- Page 5 – INSTALLING BYPASS; Seal the duct connections with duct tape.
- Page 6 – WIRING; TESTING HUMIDIFIER OPERATION; Checklist; OUTDOOR
- Page 7 – TROUBLESHOOTING YOUR HUMIDIFIER (TABLE 2); Problem
- Page 8 – Home and Building Control Home and Building Control
® U.S. Registered Trademark
Copyright © 2001 Honeywell •
•All Rights Reserved
INSTALLATION INSTRUCTIONS
69- 1571
HE120, HE160 Humidifier
Installation Kit
WELCOME
To the comfortable world of humidified air. When you use
your Honeywell humidifier, you notice that your skin is not
as dry, and that your scratchy throat and irritated nasal
passages that aggravate allergies and asthma are
steadily improving.
You have also taken the first step in reducing the
zapping
you create when you walk on your carpet and then touch
your TV, computer, metal door knob or your pet. Your
furniture and woodwork are also benefitting from the
difference that humidified air makes.
Congratulations! You have just made a great investment
in improving the comfort of your home.
APPLICATION
This installation kit contains all the parts necessary to
install your new Honeywell HE120 or HE160 Humidifier.
INSTALLATION
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories
(included) and make sure the appropriate tools are
available before beginning the installation.
Required Accessories (Included)
Required Tools
Tools required for installation include:
•
Tin snip.
•
Screwdriver.
•
Adjustable or open-end wrench.
•
Drill, punch or awl.
•
Level.
Table 1. Required Accessories.
Quantity
Accessory
6 ft (1.85M)
Bypass ducting including:
6 in. (155 mm) diameter flexible duct
Starter collar
Summer shut-off damper
Duct tape
20 ft (6.2m)
18 gauge, two-strand thermostat wire
20 ft (6.2m)
1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m)
3/8 in (9.5 mm) ID overflow tubing
1 bag
Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Overflow tube clamps (2 sizes)
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
1
Plug-in transformer
1
Overflow fitting
1
Plastic compression nut
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell HE160
Summary
HE120, HE160 HUMIDIFIER INSTALLATION KIT 69-1571 2 Determining Best Location for Humidifier • Select a location for the humidifier on the supply (warm air stream) or the return plenum. See Fig. 1. • Select a location for the bypass on the opposite plenum. The humidifier is designed to allow bypass d...
HE120, HE160 HUMIDIFIER INSTALLATION KIT 3 69-1571 7. Position the HE120 Humidifier base in the opening, mark the five screw holes, and pre-drill the screw holes. 8. Insert the three 3/4 in. (19 mm) sheet metal screws into the top holes. 9. Hang the humidifier over the screws and secure with the two...
HE120, HE160 HUMIDIFIER INSTALLATION KIT 69-1571 4 CAUTION Chemical Hazard. Can cause personal injury or equipment damage.Do not use any line connected to an air conditioner.Do not use gas line. 3. Use the self-piercing saddle valve (included) to tap into the water supply line at the location select...
