Honeywell GMPT401 - User Manual

Personal Tracker

Quick Start Guide

GMTRA-IOS-EN-QS draft

09/16

Out of the Box

The following items are shipped in the box:

• Global Mobile Tracker (GMPT-401)
• USB charge cable (ACC GMPT-401 POGO to USB Cable)
• Power adapter with regional plug adapters
• Product documentation

Modes of Operation

The Personal Tracker has 2 modes of operation:

• Two devices—Tracker + iPhone
• Standalone—Tracker only (limited functionality)

User Documentation

To download the

Personal Tracker User’s Guide

, go to

www.gt.honeywell.com

, click

Support

,

Login into Technical Sup-

port Portal

.

Personal Tracker Application

For the latest Personal Tracker Application, go to

www.gt.honeywell.com

, click

Support

,

Login into Technical Sup-

port Portal

.

Getting to Know the Personal Tracker

SOS Button

System

Indicator

LED

Satellite

Indicator

LED

Tracker Power

Button

Bluetooth

Pairing

Button

Pogo connector

for charging

Lanyard

hole

Antenna

Charging

The tracker can be charged using the USB cable connected to a wall
adapter, PC, portable USB charger, or car charger.

Status Indicators

Status information is shown two ways:

• On the iPhone in the Personal Tracker app
• On the tracker using the LED indicators

On the iPhone

Status indicators are shown on the iPhone when the tracker is con-
nected by Bluetooth to the iPhone and you are using the Personal
Tracker app.

For more detailed status information, touch

Settings

on the bottom

of the screen in the Personal Tracker app and select

Status

.

You can also enable

Stealth Mode

on the

Status

screen. This mode

will turn off any notification sounds (beeps, etc.) and LEDs so you
can use your device discreetly.

On the Tracker

Satellite Indicator

Color

Indication

Green—Blinking

Sending a message and satellite
coverage available.

Bluetooth

Connection

Satellite

Coverage

Tracker
Battery

GPS

System Indicator

Amber—Blinking

No satellite coverage.

Green—On for 3 seconds

Message sent successfully.

Amber—On for 3 seconds

Sending message failed.

Color

Indication

Green—Blinking

Power on, battery 60-100% charged.

Amber—Blinking

Power on, battery 20-60% charged.

Red—Blinking

Power on, battery 0-20% charged.

Blue—Blinking Bluetooth

connected.

Blue—Blinking Slow

In Bluetooth pairing mode (2 min).

Red—Blinking fast

Alert mode is activated, sending SOS
message.

Red—On for 60
seconds

Emergency message successfully
sent.

Red—Blinking Slow

System fault.

Green—Blinking slow
(charging)

Tracker is on, battery is fully charged.

Amber—Blinking slow
(charging)

Tracker is on, battery is charging.

Register the Tracker in ViewPoint

Before registering the Personal Tracker in ViewPoint you must com-
plete the airtime activation form (contact your Account Manager).

To create a user account:

1. Go to

viewpoint.gt.honeywell.com

, click on the

Register

link and

follow the instructions. Wait for the confirmation email.

2. Click on the link in the confirmation email to complete

registration.

Note: If you do not click the link in the email, you will need to request

another activation email by clicking the

Reset Password

button on the Login page..

3. Login using your Username (email address) and Password.

To add the tracker to ViewPoint Fleet:

1. Click

Add Terminal

.

2. Type the tracker IMEI, Serial Number, Fleet Name and other

optional information.

The IMEI and Serial Number are located on the product label
located on the back of the tracker or on the shipping box.

3. When prompted, select your terminal from the drop-down menu

and click

Confirm

.

Note: For more information on how to use ViewPoint with the

tracker, see the ViewPoint User Manual available in
ViewPoint from the Help menu.

Powering the Tracker

To turn the tracker on, press and hold the power button for 2 sec-
onds. The System Indicator LED will flash to show battery status
(see the System Indicator table). To turn the tracker off, press the
power button for 2 seconds.

Bluetooth Connection

To establish a Bluetooth connection between the tracker and
your Apple device:

1. Turn the tracker on (see above).

2. Press the Bluetooth button on the tracker. The tracker is then

discoverable for 2 minutes.

3. Activate Bluetooth on your iPhone.

4. Open the Personal Tracker App. Touch

Settings

,

Bluetooth

.

Select the tracker on the list of available devices (see the label
on the tracker for the MAC address).

5. Enter PIN code 123456. The tracker pairs with the iPhone. When

connected the Bluetooth connection icon shows on the status bar
of the Personal Tracker app.

Tracker Power

Button

Bluetooth Pairing

Button