Honeywell Galaxy 2 - Manual

Page 3 - iii; Table of Contents

iii Table of Contents Table of Contents .............................................................. iii Introduction ......................................................................................... 1Controlling Your Alarm System .......................................................... ...

Page 4 - iv

Page 5 - Introduction; An alarm system will only protect against intruders if it is; Set; Refer all servicing to qualified alarm service engineers.

1 Introduction The Galaxy 2 Series is a programmable alarm control panel that will allow you to protect yourhome or business by providing secure and reliable intruder detection.The system can be fully tailored by your installer to operate in the most convenient way foryour lifestyle or working pract...

Page 6 - Controlling Your Alarm System; Users; By entering a PIN code at a keypad and pressing function buttons.; Groups

2 Controlling Your Alarm System Users Each person who uses the system is described as a ‘User’ and can have their own uniqueidentity, in the form of a PIN code, prox tag or wireless keyfob, or a combination of all three.Different users can have a different level of access to the alarm system functio...

Page 7 - Keypads; This scrolls forward in a list or menu and activates a FULL set.; This aborts an operation or escapes back out of a menu option.; Mk7 LCD Keypad

3 Keypads There are two types of keypad available as shown below but both work in a similar manner.The number buttons are for entering PIN codes and for changes options. The function keysdown the side have the following use: A>: This scrolls forward in a list or menu and activates a FULL set. B&l...

Page 8 - Wireless Keyfobs; Setting the System — Full Set

4 Wireless Keyfobs Keyfobs are portable controllers that can be attached to a key ring. They will allow you to Setand Unset the system by a single press of a button and can sometimes be programmed withadditional functions. Because they operate by radio, they can be used anywhere around thepremises p...

Page 9 - Setting the System — Part or Night Set; O p e n Z o n e; key

5 Setting the System — Part or Night Set Part and Night setting are similar to Full setting but leave off certain detectors as agreed withyour installer. Additionally, the system can be programmed by the installer not to give any exittimer tones during the setting period (silent set).To Part or Nigh...

Page 12 - Setting and Unsetting Groups; Setting and Unsetting Without Group Choice; Hot Keys

8 Setting and Unsetting Groups It is possible to split the alarm system into separate areas or ‘Groups’ that can be set and unsetindependently. Different users can be given access to only certain groups, or to all groups.Also, individual users can be given the option of simply setting and unsetting ...

Page 13 - The function of each menu item is described in the following pages.; Menu Access; button. This will display the first menu item after showing

9 Users can then navigate around the menu using the scroll keys, ent key and esc key, or theycan jump to any specific menu item directly by typing the number of the item. An overview ofall the accessible functions is shown below. Not all users will be able to access all of thefunctions. This will de...

Page 15 - Menu 23 - Display Version; I n t r u d e r

11 Menu 22 - View Log This option displays the system event log. The log records all events that occur in the systemand is vital for tracing the chain of events during a break-in or when trying to trace a fault. Onentering the option, the most recent event is displayed on screen in the following for...

Page 16 - Menu 32 - Output Test

12 Menu 31 - Walk Test This menu allows the zones to be manually tested. There are two sub-options to this functionas follows: 1 = Test all Zones This puts all omittable zones into walk test immediately. 2 = Test Selected Zones This allows the user to select specific zones to be put into test. On se...

Page 18 - key. The number is saved by pressing; Just sends alarm activations.; Menu 47 - Remote Access; key followed by; has 5 minutes to enter his own code.

14 7 = Duress The duress function, when enabled, forces a panic signal to be sent to the monitoring stationeach time the user PIN, fob or tag is used. Duress codes should only be used in emergencysituations when there is a threat to life. Menu 44 - Mobile Numbers This option allows the SMS text mess...

Honeywell Galaxy 2 - Manual

Table of Contents:

Summary

Other Honeywell Models