Honeywell CT60 L0N - Manual

Page 2 - Memory Card Specifications

Introduction This document is only for Dolphin CT60 models marked as certified for use in hazardous environments. Dolphin CT60 models intended for use in hazardous locations are identifiable by specific labeling on the back of the device. Out of the Box Make sure that your shipping box contains thes...

Page 3 - Equipment for Use in Hazardous Locations

Equipment for Use in Hazardous Locations Routine operator inspections should occur to check for possible device damage before using the mobile computer in areas known to be hazardous. Caution: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or ...

Page 4 - Mobile Computer Features

Scan Buttons Microphone Power Button Battery Status /  Notification LED Good Read LED Speaker Touch Panel Volume Buttons Navigation Panel Mobile Computer Features

Page 8 - Install a Secondary microSIM Card (SIM 2)

3 4 1 5 2 Install a Secondary microSIM Card (SIM 2) Note: Feature available on CT60L1N Models only. Note: Always power off the computer and remove the battery before attempting to install or remove a card.

Page 9 - Install the Battery

1 2 3 Install the Battery The CT60 mobile computer ships with a Li-ion battery, manu-factured for Honeywell International Inc. Before you attempt to use, charge, or replace the battery in the mobile computer, carefully read all the information under “ Equipment for Use in Hazardous Locations ”. Ensu...

Page 10 - Charge the Mobile Computer; hours

Charge the Mobile Computer The CT60 mobile computer ships with a partially charged  battery. Charge the battery with a CT50 Series charging device for a minimum of 4 hours . Using the computer while charging the battery increases the time required to reach a full charge. CT60 mobile computers are d...

Page 11 - Sleep Mode

Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is  complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turne...

Page 12 - About the Home Screen

Notification /  Status Bar Search Bar  Touch to initiate a voice search or command. Home Screen Panel Touch to access all apps. Favorites Tray About the Home Screen To learn how to customize the Home screen, see the user guide.

Page 13 - Navigation and Function Buttons

Button Description Back Return to the previous screen. Recent Apps View and switch between recently used apps. Home Return to the Home screen. Search Start a search on the computer or the Internet. Volume Raise or lower the volume of the speaker. Scan Press right or left scan button to trigger the s...

Page 14 - Demos; Sync Data

About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. T...

Page 15 - Transfer files; Restart the Mobile Computer; Power

1. Connect the CT60 to your computer using a USB charge/communication accessory. 2. On the CT60, swipe down from the top of the screen to access the notifications panel. 3. Touch the Android System USB Connection notification twice, to open the options menu. 4. Select either Transfer files or Transf...

Honeywell CT60 L0N - Manual

Table of Contents:

Other Manuals for Honeywell CT60 L0N

Summary

Other Honeywell Models