Honeywell Burner Q179B- User Manual
Honeywell Burner Q179B– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ORDERING INFORMATION
- Page 4 – INSTALLATION; When Installing this Product...; WIRING; CAUTION
- Page 5 – CHECKOUT; Pilot Turndown Test
PRODUCT DATA
60-2032-4
®U.S Registered Trademark
Copyright © 2005 Honeywell Inc. All Rights Reserved
Q179A,B Gas Pilot Burner Assemblies
GENERAL
Q179A,B Gas Pilot Burner Assemblies use the flame
rectification principle to prove the flame. Q179A,B are used in
conjunction with a suitable electronic flame safeguard control
on industrial or commercial gas and gas pilot ignited oil
burners.
• Q179A is a gas pilot assembly with a flame electrode
(rod) and ignition electrode, making it suitable for
applications requiring an interrupted or intermittent
electrically ignited gas pilot burner.
• Q179A1183 is an “I” port burner with an ignition
electrode (spark) only.
• Q179B has only the flame electrode and is suitable for
use in continuous pilot applications.
• Primary aerated type burner is equipped with stainless
steel fins that provide the proper flame rod area to
ground area ratio for maximum flame signal and flame
stabilization.
• Stainless steel electrode(s) are mounted in ceramic
insulators, which permit electrode adjustment.
• Rajah connectors facilitate disconnecting.
• Bracket permits side or end mounting.
Contents
General .............................................................................
Features ...........................................................................
Ordering Information ........................................................
Specifications ...................................................................
Installation ........................................................................
Checkout ..........................................................................
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Q179A,B GAS PILOT BURNER ASSEMBLIES 60-2032—4 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number, or specify: 1. Order numbr 2. Burner tip 3. Thermo...
Q179A,B GAS PILOT BURNER ASSEMBLIES 60-2032—4 4 a On some ground areas, one or more prongs were intentionally removed at the factory. b Orifice 0.025 in. (0.635 mm) diameter. c Orifice 0.0130 in. (0.330 mm) diameter (order separately). d Orifice 0.028 in. (0.711 mm) diameter. INSTALLATION When Insta...
Q179A,B GAS PILOT BURNER ASSEMBLIES 5 60-2032—4 Use high tension wire, of a type found acceptable by a nationally recognized testing agency, for the wiring to the ignition electrode (Q179A). High tension wires should be rated electrically equivalent to type GTO-10 and should have temperature and hum...
