Honeywell AT72D1683 - Installation Manual

Honeywell AT72D1683 – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – PRODUCT OVERVIEW; Common Enclosure Features; PREPARATION; Included in this Package; Material and Tools Required; PRECAUTIONS
Page 3 – Safety Precautions; WARNING; INSTALLATION SUMMARY; Removing and replacing the enclosure door; Locate and mark mounting holes
Page 4 – Locate and remove enclosure knockouts
Page 5 – MOUNTING AND DIMENSIONS
Page 6 – Install perforated backplate panel (optional,
Page 7 – POWER WIRING; CAUTION; Removing the Wiring Shield
Page 8 – Earth Grounding; Connecting the 120Vac Power Circuit; Re-routing wiring for 120V module
Page 9 – MOUNTING DEVICES ON THE DIN RAIL
Page 10 – GROUNDING DEVICES AND; Grounding wires
Page 11 – REPLACEMENT PARTS
Page 12 – UL LISTING

Loading the manual

INSTALLATION INSTRUCTIONS

Put Bar Code Here

62-0299-01

ENC-H-001 and ENC-H-002

Enclosure Install Guide

Optional backplate panel may be installed if ENC-H-002 is to

house user-supplied ancillary items such as relays or other

devices.

This document covers the mounting and wiring of WEBs™

ENC series enclosures for housing the WEB-201 or WEB-600

series controller and its expansion modules. It assumes you

are an engineer, technician, or service person who is

performing system design or installation. Instructions apply to

the following models:

Contents

Product Overview .............................................................

Preparation .......................................................................

Precautions .......................................................................

Installation Summary ........................................................

Pre-Installation ..................................................................

Mounting and Dimensions ................................................

Power Wiring ....................................................................

Mounting Devices on the DIN Rail ....................................

Grounding Devices and Connecting Power ...................... 10

Replacement Parts ........................................................... 11

NOTE: Separate documents cover the mounting and wiring

of WEB-201 and WEB-600 series controllers (includ-

ing the NPB-PWR-H and NPB-PWR-UN-H power

supply modules), as well as documents for WEB-

201/600 I/O expansion modules. See Related Docu-

mentation, page 2.

All certifications and listing information related to a

WEB-201/600 controller can be found in its mounting

and wiring document.

ENC-H-001

ENC-H-002

Models

Description

ENC-H-001

Small-sized enclosure (12 in. x 18 in. x 4 in.)

with integral DIN-rail, 24Vac, 40VA

transformer,

AC convenience outlet, removable door.

Accommodates a WEB-201/600 controller

and one IO-34-H, or a WEB-201/600,

IO-16-H, and NPB-PWR-H.

ENC-H-002

Large-sized enclosure (12 in. x 28 in. x 4 in.)

with integral DIN-rail, 24Vac, 40VA

transformer,

AC convenience outlet, removable door.

Accommodates a WEB-201/600 controller

and up to four IO-16-H and an NPB-PWR-H,

or other possible combinations.

ENC-H-BPK-1 Perforated backplate panel (8 in. x 11 in.).
ENC-H-BPK-2 Perforated backplate panel (11 in. x 11 in.).

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Honeywell
Model: AT72D1683
Document type: Installation Manual
Language(s): English
Pages: 12
File size: 1.3 MB
Format: PDF

Other Manuals for Honeywell AT72D1683

Summary

Page 2 - PRODUCT OVERVIEW; Common Enclosure Features; PREPARATION; Included in this Package; Material and Tools Required; PRECAUTIONS

ENC-H-001 AND ENC-H-002 ENCLOSURE INSTALL GUIDE 62-0299—01 2 PRODUCT OVERVIEW The ENC series includes two different enclosures used to house WEB-201 or WEB-600 systems: ENC-H-001 Small enclosure is 18-gauge steel, at 12 in. wide x 18 in. tall x 4 in. in.deep enclosure with a single DIN rail. DIN rai...

Page 3 - Safety Precautions; WARNING; INSTALLATION SUMMARY; Removing and replacing the enclosure door; Locate and mark mounting holes

ENC-H-001 AND ENC-H-002 ENCLOSURE INSTALL GUIDE 3 62-0299—01 CAUTION Cautions remind the reader to be careful. They alert readers to situations where there is a chance that the reader might perform an action that cannot be undone, might receive unexpected results, or might lose data. Cautions contai...

Page 4 - Locate and remove enclosure knockouts

ENC-H-001 AND ENC-H-002 ENCLOSURE INSTALL GUIDE 62-0299—01 4 PROCEDURE 3:LOCATE AND MARK ENCLOSURE MOUNTING HOLES. 1. With the enclosure door opened or removed, position the enclosure on the wall where it will be installed. NOTE: See Fig. 2 (ENC-H-001) or Fig. 3 (ENC-H-002) for locations and dimensi...