Honeywell 8832301S - User Manual

Page 2 - INDEX

I. INSTALLATION INSTRUCTIONS Product Overview / Tools Required.......................................................................................................... Page 1 Prepare Door and Jamb..........................................................................................................

Page 3 - PAY CLOSE ATTENTION TO ALERTS; INSTALLATION INSTRUCTIONS; Tools Required for Installation; Tools Required for Installation on Pre-drilled Doors:; PACKAGE CONTENTS

1 PAY CLOSE ATTENTION TO ALERTS INSTALLATION INSTRUCTIONS Tools Required for Installation on Doors That Require Drilling: • Drill• Tape Measure• Pencil• 2-1/8” (54mm) Drill Hole Saw• 1” (25mm) Drill• 1/16” (2mm) Drill• Chisel• Hammer• Phillips Screwdriver DO NOT RETURN TO STORE! If any parts are mis...

Page 4 - MARK THE DOOR FOR DRILLING; PREPARE DOOR AND JAMB

2 NOTE: For installation on doors with pre-drilled holes skip to page 4.1. TEMPLATE a. Cut out template printed on page 20 of this Manual (Figure 1a). b. Fold template and place on door 36” (915mm) from the ground as marked (Figure 1b). 2. MARK THE DOOR FOR DRILLING b. Mark center hole on door edge ...

Page 5 - ADJUSTING AND INSTALLING LATCH; DO NOT OVER TIGHTEN; PULL; Curved part of Latch always faces

3 ADJUSTING AND INSTALLING LATCH 5. INSTALLING THE LATCH (need phillips head screwdriver) a. Make sure the face plate sits flush with the door. Do not force the latch into the mortise flush. Chisel out excess material if necessary for a flush fit (Figure 5a). b. Using two 3/4” (19mm). screws provide...

Page 6 - INSTALLING EXTERIOR ASSEMBLY; NOTE: Lock and unlock using the key to see if

4 NOTE: Tailpiece must be positioned vertically INSTALLING EXTERIOR ASSEMBLY 7. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR a. From the side marked “This side against door”, route the Control Wire through the rectangular slot in the Mounting Plate (Figure 7a). b. Place Mounting Plate against door wit...

Page 7 - NOTE: Lock and unlock using Interior Knob to see if; INSTALLING INTERIOR ASSEMBLY; ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY

5 NOTE: Tailpiece must be positioned vertically NOTE: Lock and unlock using Interior Knob to see if the latch is opening and closing easily. INSTALLING INTERIOR ASSEMBLY 9. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY a. Use care to attach the Control Wire male plug to the Interior Assembly fema...

Page 8 - Installing Batteries; With the Door Open; INSTALLATION OVERVIEW

6 NOTE: Do not touch the Keypad until the blue light turns off. Do not use rechargeable batteries or non-alkaline batteries. INSTALLING INTERIOR ASSEMBLY 11. Installing Batteries a. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the direction noted +/- on the Compartment...

Page 9 - Search “Honeywell Lock” in the App Store or Google Play Store.; NP; HONEYWELL LOCK MOBILE APPLICATION INSTALLATION & USE

7 PRIMARY APP ICONS Messages User Unlock Users Save Records Menu Dropdown Edit Settings eKey Passcode KEYPAD SYMBOLS USER TYPES Administrative User - Able to send & delete eKeys & Passcodes, change AP , and remove connected lock(s) Authorized User - Able to send eKeys & Passcodes, can de...

Page 10 - Select “Name” from the list; ACTIVATE AUTO LOCK; CONNECT TO BLUETOOTH LOCK

8 IMPORTANT: Your Bluetooth must be enabled and you must be within range of the lock. 1. Press any key on Lock to activate the Lock. (Digital keys are lit when activated). 2. Click the “+” icon on the start screen. 3. Select which type of lock you would like to add 4. Click on available lock 5. Foll...

Page 11 - USING APP TO LOCK AND UNLOCK

9 UNLOCK DOOR WITH THE APP 1. Open App, choose Lock and Touch App to Unlock 2. Open App & Touch 2 Keys to Unlock LOCK DOOR WITH THE APP 1. Open the App 2. Click on the connected safe you wish to lock 3. Press and hold the lock button until the safe has locked. AUTO LOCK If enabled in “Lock Setti...

Page 12 - SYSTEM SETTINGS

10 1. Go to the Main menu by pressing the * icon at the top left corner of the screen. 2. Select “System Settings” 3. Select below settings as desired. PATTERN PASSWORD Create a pattern to unlock the App. Provides extra security BEEP ON UNLOCKING Mute or enable a sound when the door is unlocked VIBR...

Page 13 - ACCOUNT MANAGEMENT

11 1. Go to the Main menu by pressing the * icon at the top left corner of the screen. 2. Select “Account Management” 3. Select below settings as desired. PROFILE PICTURE 1. Click on the picture at the top of the page 2. Change the picture associated with the account by clicking the icon NICKNAME 1....

Page 15 - MANAGE USERS; FREEZE A USERS’ EKEY

13 MANAGE USERS Ensure that WiFi is connected and working in order to manage Users associated with a connected lock FREEZE A USERS’ EKEY 1. Select the lock with the eKey you want to Freeze 2. Select the in the bottom menu 3. Select the User you would like to Freeze 4. Select “Freeze” 5. Confirm that...

Page 17 - RESET PASSCODES

15 MANAGE USERS RESET PASSCODES When you reset eKeys, all eKeys will be removed from the lock. 1. Select the lock the Passcode is associated with 2. Select the in the bottom menu 3. Select “Passcode” from the top tab 4. Select the Dropdown icon 5. Choose “Reset Passcode” from the top selections 6. I...

Page 18 - EXTERIOR ASSEMBLY OVERVIEW; Indicator light; Programming Symbols; Administrator Passcode:; Programming Tips; KEY PAD PROGRAMMING - OPTIONAL

16 EXTERIOR ASSEMBLY OVERVIEW Indicator light Green • Indicates successful programming step• Indicates unlocking is successful Red • Indicates failed programming step• Indicates locking is successfu l The electronic lock requires four (4) High Quality AA Alkaline batteries. When all 4 batteries are ...

Page 19 - RESTORE FACTORY SETTINGS; OR; PROGRAMMING PHYSICAL KEYPAD

17 The Physical Keypad is used to lock and unlock the door, and program functions If you have connected the lock to the Honeywell Lock Application, the default Passcode “1234” will no longer work; and you will have to use the AP from the App, which should be changed after connecting (see Lock Settin...

Page 20 - CUSTOMIZE PASSCODES RECEIVED FROM THE APP; In order to change a Passcode, the Passcode; DISABLE VACATION MODE

18 6. CUSTOMIZE PASSCODES RECEIVED FROM THE APP a. Input the AP b. - Green light and beep c. 1d. e. Input RP f. g. NP h. i. Repeat NP j. - Green light and beep In order to change a Passcode, the Passcode must have been sent from the App, and used by the Receiver. 8. VACATION MODE a. Input the AP b. ...

Page 21 - TROUBLESHOOTING

19 Issue Solution Lock will not function electronically. • Check that all batteries are fresh high quality Alkaline Batteries. • Check for proper polarity (+ -) of all batteries. • Check that the Control Wire is attached to the Interior Assembly. Lock gives error signal when opening or locking and L...

Page 24 - CONSUMER ASSISTANCE

22 EMAIL: [email protected] WEBSITE: www.honeywellsafes.com ADDRESS: Consumer Assistance Dept. LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA TELEPHONE: US/Canada 1-800-860-1677 Ext. 1801 (Toll Free) Mexico 01-800-288-2872 After English voice recording stops you must then ...

Page 25 - Regulatory Compliance; FCC; This device complies with Part 15 of the FCC rules.; FCC COMPLIANCE

23 Regulatory Compliance This product complies with standards established by following regulatory bodies: - Federal Communications Commission (FCC) FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inte...

Page 26 - WARRANTY

24 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. www.honeywellsafes.com Manufactured by:LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 M8812309S 8...

Honeywell 8832301S - User Manual

Table of Contents:

Summary

Other Honeywell Models