Honeywell 8812309S - User Manual

3 NOTE: Deadbolt Latch Set is shipped with the backset set at 2-3/8” (60mm) Measure the backset (backset is distance between edge of the door and the center of Lock). 1. TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET a. Hold latch with numbers facing forward and thumb pressing on the...

4 3. INSTALLING THE DEADBOLT LATCH SET (need phillips head screwdriver) a. Insert Deadbolt Latch Set into door edge hole with the word “UP” and the arrow on the extension plate facing UP. Cross shaped spindle connector will be at the bottom of the Deadbolt Latch Set (Figure 3a). b. Make sure the fac...

5 6. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR a. Gently move the switch to “L” for Left Handed Door (Figure 6a). b. Gently move the Switch to “R” for Right Handed Door (Figure 6b). 7. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS a. The Interior Knob goes in the Horizo...

6 Right handed door view Figure 9a-f Rubber Gasket Control Wire Tailpiece (Vertical) Latch Hole Figure 8a Figure 8c C 3/4”(19mm) screw(Optional Instalation) Mounting Plate 7/8”(22mm) screws Control Wire B Figure 10a 9. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR a. From the side marked “This side aga...

7 Vertical Tailpiece Figure 12a A 5/16” (8mm) screws 1”(25mm) screw D Figure 11a Match Color NOTE: Tailpiece must be positioned vertically 11. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY a. Use care to attach the Control Wire male plug to the Interior Assembly female socket connector. b. Carefu...

8 13. INSTALLING BATTERIES a. Slide battery cover up and remove. b. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the direction noted +/- on the Compartment. The Lock will beep 2 times, the keypad will illuminate blue, and the Honeywell button will flash green twice to ...

9 PRIMARY APP ICONS Messages User Unlock Users Save Records Menu Dropdown Edit Settings eKey Passcode KEYPAD SYMBOLS USER TYPES Administrative User - Able to send & delete eKeys & Passcodes, change AP , and remove connected lock(s) Authorized User - Able to send eKeys & Passcodes, can de...

10 IMPORTANT: Your Bluetooth must be enabled and you must be within range of the lock. 1. Press any key on Lock to activate the Lock. (Digital keys are lit when activated). 2. Click the “+” icon on the start screen. 3. Select which type of lock you would like to add 4. Click on available lock 5. Fol...

11 UNLOCK DOOR WITH THE APP 1. Open App, choose Lock and Touch App to Unlock 2. Open App & Touch 2 Keys to Unlock LOCK DOOR WITH THE APP 1. Open the App 2. Click on the connected safe you wish to lock 3. Press and hold the lock button until the safe has locked. AUTO LOCK If enabled in “Lock Sett...

12 1. Go to the Main menu by pressing the * icon at the top left corner of the screen. 2. Select “System Settings” 3. Select below settings as desired. PATTERN PASSWORD Create a pattern to unlock the App. Provides extra security BEEP ON UNLOCKING Mute or enable a sound when the door is unlocked VIBR...

13 1. Go to the Main menu by pressing the * icon at the top left corner of the screen. 2. Select “Account Management” 3. Select below settings as desired. PROFILE PICTURE 1. Click on the picture at the top of the page 2. Change the picture associated with the account by clicking the icon NICKNAME 1....

15 MANAGE USERS Ensure that WiFi is connected and working in order to manage Users associated with a connected lock FREEZE A USERS’ EKEY 1. Select the lock with the eKey you want to Freeze 2. Select the in the bottom menu 3. Select the User you would like to Freeze 4. Select “Freeze” 5. Confirm that...

17 MANAGE USERS RESET PASSCODES When you reset eKeys, all eKeys will be removed from the lock. 1. Select the lock the Passcode is associated with 2. Select the in the bottom menu 3. Select “Passcode” from the top tab 4. Select the Dropdown icon 5. Choose “Reset Passcode” from the top selections 6. I...

18 EXTERIOR ASSEMBLY OVERVIEW Indicator light Green • Indicates successful programming step• Indicates unlocking is successful Red • Indicates failed programming step• Indicates locking is successfu l The electronic lock requires four (4) High Quality AA Alkaline batteries. When all 4 batteries are ...

19 The Physical Keypad is used to lock and unlock the door, and program functions If you have connected the lock to the Honeywell Lock Application, the default Passcode “1234” will no longer work; and you will have to use the AP from the App, which should be changed after connecting (see Lock Settin...

20 6. CUSTOMIZE PASSCODES RECEIVED FROM THE APP a. Input the AP b. - Green light and beep c. 1d. e. Input RP f. g. NP h. i. Repeat NP j. - Green light and beep In order to change a Passcode, the Passcode must have been sent from the App, and used by the Receiver. 8. VACATION MODE a. Input the AP b. ...

21 Issue Solution -Latch Working Backwards. -Lock unlocks when lock button is pushed or locks when unlock button or code is pushed. Direction switch is set to incorrect setting • Remove the Interior Assembly and move the switch to the opposite direction. • Check that your switch is set in the correc...

24 EMAIL: [email protected] WEBSITE: www.honeywellsafes.com ADDRESS: Consumer Assistance Dept. LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA TELEPHONE: US/Canada 1-800-860-1677 Ext. 1801 (Toll Free) Mexico 01-800-288-2872 After English voice recording stops you must then ...

25 Regulatory Compliance This product complies with standards established by following regulatory bodies: - Federal Communications Commission (FCC) FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inte...

26 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. www.honeywellsafes.com Manufactured by:LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 M8812309S 8...