Page 2 - Table Of Contents
- 2 - Table Of Contents QUICK REFERENCE .................................................................................................................... 3 INTRODUCTION ........................................................................................................................... 6 SY...
Page 3 - Quick Reference; TO ARM THE SYSTEM; TO ARM THE SYSTEM IN INSTANT MODE, AND STAY INSIDE; TO RESET SMOKE DETECTOR
- 3 - Quick Reference TO ARM THE SYSTEM 1. Check to make sure the system is ready. (The Green READY light is lit.) 2. Enter your 4-digit (or 6-digit) user code. The ARMED / light will light. 3. Exit through a door designated by your installer as an exit/entry door. NOTE: If you DO NOT EXIT during th...
Page 5 - Other LED display combinations:; LEDs indicate the system is in Walk
- 5 - Quick Reference (Cont’d) The following table provides a summary listing of LED indications when using a LED keypad. INDICATOR ON SLOW PULSE (approx. 600mS ON – 600mS OFF) FAST BLINK (approx. 150mS ON – 150mS OFF) SLOW BLINK (approx. 100mS ON – 900mS OFF) ARM / Armed Comm. Fail Alarm – AC/LB / ...
Page 6 - Introduction; or; or; CODE
- 6 - Introduction Congratulations on your decision to protect your home or business with the OMNI® security system. You have chosen a reliable, state-of-the-art security system that is remarkably easy to operate. Your system has been professionally installed by your local Security Company whose rep...
Page 7 - System Reference; ZONE DESCRIPTIONS; Zone 4 Main entrance to building.; Zone Description Zone Description; Exit time is the same for all designated entry/exit doors.
- 7 - System Reference ZONE DESCRIPTIONS In the following table, enter a description of the area of protection for each zone. Example: Zone 1 Windows on North side of building. Zone 4 Main entrance to building. Zone Description Zone Description 1 25* 2 26* 3 27* 4 28* 5 29* 6 30* 7 31* 8 32* 9* 33* ...
Page 8 - KEYS DESCRIPTION; These key combinations may also be programmed for other system; PAGER ALERT
- 8 - System Reference (cont) SEND-HELP ALERT All keypads are equipped with emergency-pair keys. In order to activate the alert, both keys must be pressed at the same time. The type of keypad you have installed dictates which keys you press. Your installer will show you how to activate these emergen...
Page 9 - USER CODE ASSIGNMENTS; User Assigned
- 9 - System Reference (cont) USER CODE ASSIGNMENTS In the following table, enter the names of the individuals assigned to each user number. User Assigned To… User Assigned To… 1 33* 2 34* 3 35* 4 36* 5 37* 6 38* 7 39* 8 40* 9 41* 10 42* 11 43* 12 44* 13 45* 14 46* 15 47* 16* 48* 17* 49* 18* 50* 19*...
Page 10 - Arming the System; IS THE SYSTEM READY?; TO ARM THE SYSTEM AND LEAVE; LED lit
- 10 - Arming the System IS THE SYSTEM READY? You can arm and disarm the burglar portion of your security system. Before you can arm the system, it must be “ready.” If you have a protected door open, or someone is moving in view of a motion detector, the system will not display the “ READY ” message...
Page 11 - WHEN THE SYSTEM IS NOT READY; See; TO ARM THE SYSTEM AND STAY INSIDE; LEDs lit
- 11 - Arming the System (cont) WHEN THE SYSTEM IS NOT READY If the system is not ready to be armed, the READY/ ✔ light will be off and the display will show which zone or zones are not ready. The following conditions will be indicated by the zone lights (LED keypad) or described on the display: Fas...
Page 12 - TO ARM THE SYSTEM IN INSTANT MODE AND STAY INSIDE
- 12 - Arming the System (cont) TO ARM THE SYSTEM IN INSTANT MODE In INSTANT mode, all alarm sensors, including doors that normally have a delay to allow you to disarm the system, will report an alarm immediately if activated. Check to make sure the system is READY/ ✔ . When it is ready, press: INST...
Page 13 - TO BYPASS A ZONE; NOT; Zone number displayed; TO UNBYPASS A ZONE
- 13 - Arming the System (cont) TO BYPASS A ZONE The Bypass function excludes a zone of protection from the security system until it is unbypassed (either by using the unbypass procedure or when you disarm the system). Bypassing can only be done while the system is disarmed. NOTE: 24-hour zones may ...
Page 14 - Disarming the System
- 14 - Disarming the System When you disarm the system, you disarm only the burglar portion of your system; any smoke or heat detectors and panic keys will remain armed. You must enter through a designated entry door and disarm the system within the time allowed. You can have different amounts of ti...
Page 15 - User Codes; TO ADD OR CHANGE A USER CODE; nn; Level; ASSIGNING PARTITIONS TO USERS (OMNI624 and OMNI848 ONLY); user no. = the user that will be assigned access to other partitions
- 15 - User Codes TO ADD OR CHANGE A USER CODE Users can be added or changed directly at the keypad. Your system can have up to 15 (OMNI400 and OMNI600), 32 (OMNI624), or 64 (OMNI848) different user codes, with each assigned to one of four authority levels and to a primary partition (OMNI624 and OMN...
Page 16 - Miscellaneous Commands; TO DELETE A USER CODE; DURESS
- 16 - Miscellaneous Commands TO DELETE A USER CODE To delete a user, press the CODE/ button followed by the 4-digit (or 6-digit) master user code. Enter the user number, then press [#] to delete. For example, to delete user 3, do the following: Master User Code User ID # to delete CODE / 03 [#] NOT...
Page 17 - QUICK BYPASS; QUICK EXIT; To turn Chime on or off: Press; ASSIGN USERS ACCESS TO OTHER PARTITIONS (OMNI624 and OMNI848 ONLY); * Partition 3 is available on the OMNI848 ONLY.
- 17 - Miscellaneous Commands (cont) QUICK BYPASS If you have Quick Bypass programmed for your system, you can bypass zones without entering your user code. The Quick Bypass procedure is: BYPASS / 2-digit Zone No. (e.g., 01 for zone 1) NOTE: Bypassed zones are not protected when the system is armed....
Page 20 - DISPLAY ZONE DIRECTORY (LCD KEYPADS ONLY); KEYPAD BACKLIGHT TIMER
- 20 - Miscellaneous Commands (cont) DISPLAY ZONE DIRECTORY (LCD KEYPADS ONLY) To view a list of the zones in the current partition, press # + 4 . The zones will automatically scroll. USER LOG VIEW (LCD KEYPADS ONLY) To view the system log, press: # + 5 , + 3 + user code.* (*The user code is not req...
Page 22 - Using a Pager
- 22 - Using a Pager If so programmed, the system can send messages to a pager. The messages are displayed as follows: A C C T E X X X where: "ACCT" = the 4-digit central station No. 1 account number set by your system installer. We suggest that you obtain the number from your system install...
Page 23 - TURN PAGER REPORTING ON/OFF FOR THE PARTITION (OMNI624 and 848 ONLY); ASSIGNING PARTITIONS TO USERS
- 23 - Using a Pager (cont) The [#] , [5] , [ 8] command is accessible only while the system is disarmed and the dialer, dialer delay, and bell are not active. In pager phone number programming mode, only the LCD keypad provides visual display of the numbers already programmed or numbers that are be...
Page 24 - Testing the System; SYSTEM TEST; Call the central station to tell them you are finished testing.; BATTERY TEST; Disconnect AC Power from the system.
- 24 - Testing the System SYSTEM TEST It is recommended that you test your system once a week using the following procedure: NOTE: If your system is monitored, contact your central station before you perform this test. 1. Arm your security system. 2. Wait until your exit time is over. Then activate ...
Page 25 - Recommendations On Smoke Detectors
- 25 - Recommendations On Smoke Detectors With regard to the number and placement of smoke/heat detectors, we subscribe to the recommendations contained in the National Fire Protection Association’s (NFPA) Standard #72 noted below. Early warning fire detection is best achieved by the installation of...
Page 26 - Emergency Evacuation; Position your detector or your interior and/or exterior
- 26 - Emergency Evacuation 2nd FLOOR BACK FRONT floor_plan2-V0 BA TH CLOSET BEDR OOM BEDR OOM BEDR OOM 1st FLOOR BA TH KITCHEN BEDR OOM BEDR OOM PORCH BACK DOOR Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protectio...
Page 27 - Glossary; may
- 27 - Glossary AC/ : Small green power on-off light between the center buttons on the keypad. When lit, the system is running on primary power; when not lit, the system is running off the backup battery. ALARM: Sound from keypad or other horn/siren indicates a burglar alarm, fire alarm, or other co...
Page 29 - RADIO FREQUENCY EMISSIONS STATEMENTS; FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15; TELEPHONE/MODEM INTERFACE STATEMENTS; FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68; INDUSTRY CANADA; RINGER EQUIVALENCE NUMBER NOTICE
- 29 - RADIO FREQUENCY EMISSIONS STATEMENTS FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference r...
Page 30 - INDUSTRIE CANADA; TELEPHONE OPERATIONAL PROBLEMS
- 30 - INDUSTRIE CANADA AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences t...
Page 31 - Limitations of This Alarm System
- 31 - Limitations of This Alarm System While this system is an advanced design security system, it does not offer guaranteed protection against burglary, fire, or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reaso...
Page 32 - ONE YEAR LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 165 Eileen Way, Syosset, New York 11791, warrants its security equipment (the "product") to be free from defects in materials and workmanship for one year...
