Honeywell 69-1496 - Manual
Honeywell 69-1496 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Settings; Setting FAN and SYSTEM Switches
- Page 4 – Both heating and cooling are off.; IMPORTANT
- Page 5 – Displaying Temperature Setting; indicator; To display the temperature setting on the digital; display, press either the
- Page 6 – Changing Temperature Setting; To lower the temperature setting, press the
- Page 7 – Troubleshooting Guide; CAUTION; Heating or cooling does not come on.; Check power to the heating or cooling equipment.
- Page 8 – Check for air movement at the register.; Temperature setting is too warm or cool; Adjust the temperature by pressing either the
- Page 9 – For service, contact your local heating and cooling contractor:
1
69-1496
OWNER’S GUIDE
Electronic
Thermostat
69-1496
M14752
FAN
SYSTEM
Auto On
Cool Off Heat
Set
Room
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 69-1496 Settings Setting FAN and SYSTEM Switches Fan and system settings are controlled by using FAN andSYSTEM switches located on the bottom of the thermostatcase. First set the FAN switch:Auto: Normal setting for most homes. In cooling, thefan goes off and on with the cooling equipment.In heatin...
4 69-1496 Then set the SYSTEM switch:Cool: Normal setting for months when your homeneeds cooling (air conditioning). Digital displayshows a snowflake when cooling is on. Off: Both heating and cooling are off. Heat: Normal setting for months when your homeneeds heating. Digital display shows a flamew...
5 69-1496 Displaying Temperature Setting NOTE: Your temperature setting can be set anywherefrom 40 ° to 99 ° F (5 ° to 37 ° C). The temperature setting and the room temperature areshown separately on the digital display. The ▼ indicator points to Set when the temperature setting is displayedand to R...
