Page 2 - Notices and Trademarks; Copyright 2006 by Honeywell; Industrial Measurement and Control; Honeywell
03/06 Process Instrument Explorer Configuration Software User Manual ii Notices and Trademarks Copyright 2006 by Honeywell Revision 7 March 2006 WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office fo...
Page 3 - About This Document; Abstract; World Wide Web; Telephone
03/06 Process Instrument Explorer Configuration Software User Manual iii About This Document Abstract This document provides descriptions and procedures for the installation and operation of Process Instrument Explorer software. Contacts World Wide Web The following lists Honeywell’s World Wide Web ...
Page 4 - Contents
iv Process Instrument Explorer Configuration Software User Manual 03/06 Contents 1 INTRODUCTION ................................................................................................... 1 1.1 Overview ............................................................................................
Page 5 - Tables
03/06 Process Instrument Explorer Configuration Software User Manual v Tables Table 3-1 Operations Icons _____________________________________________________________ 8 Table 3-2 Operations Menu _____________________________________________________________ 9 Table 4-1 Service menu __________________...
Page 6 - Figures
vi Process Instrument Explorer Configuration Software User Manual 03/06 Figures Figure 1-1 Screen capture of Process Instrument Explorer running on a Pocket PC _________________ 1
Page 7 - Introduction; PC; Communication types available on process instruments:
Introduction 03/06 Process Instrument Explorer Configuration Software User Manual 1 1 Introduction 1.1 Overview Process Instrument Explorer (P.I.E.) lets you configure Honeywell process instruments such as controllers and analyzers using a PC (desktop/laptop) or Pocket PC. Figure 1-1 Screen capture ...
Page 9 - Installation; System Requirements
Installation 03/06 Process Instrument Explorer Configuration Software User Manual 3 2 Installation 2.1 System Requirements Hardware PC CPU: Intel x86 processor RAM: 32MB Disk space: 4.2MB For IR Communications: Actisys ACT-IR220L+ http://www.actisys.com For RS-485 Communications: Technman PC5001 or ...
Page 12 - Uninstall Procedure
Installation 6 Process Instrument Explorer Configuration Software User Manual 03/06 2.3 Uninstall Procedure Follow this procedure to uninstall P.I.E. from your PC or Pocket PC. ATTENTION: You must uninstall older versions from your PocketPC before doing an upgrade. Step Action 1 Insert P.I.E. CD int...
Page 13 - Operations
Operations 03/06 Process Instrument Explorer Configuration Software User Manual 7 3 Operations 3.1 Overview The PC and Pocket PC Operations are virtually identical. Any differences will be indicated. Operations choices are: Communications Setup —Before uploading or downloading instrument configurati...
Page 14 - Table 3-1 Operations Icons
Operations 8 Process Instrument Explorer Configuration Software User Manual 03/06 Table 3-1 Operations Icons PC Pocket PC
Page 15 - Table 3-2 Operations Menu
Operations 03/06 Process Instrument Explorer Configuration Software User Manual 9 Table 3-2 Operations Menu PC (click Operations) Pocket PC (tap Menu/Operations)
Page 17 - Attention Infrared users; : Before transferring data between your instrument and
Operations 03/06 Process Instrument Explorer Configuration Software User Manual 11 3.1.2 Upload Upload copies your instrument’s configuration into P.I.E. where it can be saved, edited, and downloaded back to the instrument or other instruments. Attention Infrared users : Before transferring data bet...
Page 22 - Check the following before using infrared communications.; Infrared transmitter (Cable or Pocket PC); The beam checkbox in the Pocket PC must be unchecked. See
Operations 16 Process Instrument Explorer Configuration Software User Manual 03/06 3.1.7 Infrared checklist Check the following before using infrared communications. Infrared transmitter (Cable or Pocket PC) - The Infrared transmitter is pointed directly at the process instrument’s Infrared port. - ...
Page 23 - Q: How can I find the address of my Honeywell instrument?; LAN, you need to obtain available IP addresses from your IT group.; Q: How do I know what SMTP address to use?; configuration and can be obtained from your IT group.
Operations 03/06 Process Instrument Explorer Configuration Software User Manual 17 3.1.8 Ethernet Q&A Q: How can I find the address of my Honeywell instrument? A: The Ethernet address information that has been set in the instrument can be retrieved by using P.I.E. to upload a product configurati...
Page 24 - Services
Services 18 Process Instrument Explorer Configuration Software User Manual 03/06 4 Services 4.1 Overview Services lets you manage your files through the following menus. 4.1.1 Pocket PC Services Menu Transfer Configuration - Lets you copy device configurations saved in the Pocket PC to the PC. Trans...
Page 25 - Enable Descriptive Name Support; – When enabled, Descriptive Name uses 16; Import Database; – Lets you add all or part of another database to your current; Export Database
Services 03/06 Process Instrument Explorer Configuration Software User Manual 19 Enable Descriptive Name Support – When enabled, Descriptive Name uses 16 characters to describe your configuration groups, functions and parameters in more detail than the instrument’s 8-character display. The descripti...
Page 26 - Transfer Configuration; Microsoft Active Sync must be installed on the Pocket PC.
Services 20 Process Instrument Explorer Configuration Software User Manual 03/06 4.2 Export Configuration (PC only) Export Configuration lets you write a configuration file to a .CSV formatted file which can be read into spreadsheet software. Step Action 1 Select Export Configuration from the Servic...
Page 27 - Manage Configuration Files
Services 03/06 Process Instrument Explorer Configuration Software User Manual 21 4.4 Manage Configuration Files Lets you copy, delete, rename and view the properties of saved configuration files. Step Action 1 Select Manage Configuration Files/Manage Files from the Services menu. 2 Select device (in...
Page 28 - Enable Descriptive Name; Enable Descriptive Name Support
Services 22 Process Instrument Explorer Configuration Software User Manual 03/06 4.6 Transfer Descriptive File (PC only) Lets you transfer a new 16-character descriptive file from the desktop/laptop to the Pocket PC. (Descriptive files are provided by Honeywell.) See Enable Descriptive Name Support ...
Page 30 - Export Database
Services 24 Process Instrument Explorer Configuration Software User Manual 03/06 4.10 Export Database Lets you save all or part of the current database so that it may later be imported. Step Action 1 Select the Device Type for configuration(s) you wish to Export (for example, UDC2500). 2 If you wish...
Page 31 - Index
Index 03/06 Process Instrument Explorer Configuration Software User Manual 25 5 Index alarm email, 12, 14 Communications setup, 10 Device Types, 12, 13 Download, 13 email, 12, 14 Enable Descriptive Name Support, 22 Ethernet Q&A, 17 Ethernet & Email, 12, 14 Export Configuration, 20 Export Dat...
Page 32 - Sales and Service
Sales and Service 26 Process Instrument Explorer Configuration Software User Manual 03/06 6 Sales and Service For application assistance, current specifications, pricing, or name of the nearest Authorized Distributor, contact one of the offices below. ARGENTINA Honeywell S.A.I.C. Belgrano 1156 Bueno...
