Honeywell 3500 - Manual
Honeywell 3500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Ethernet Cable Kit for UDC 2500/3200/3500
Document Number: 51-52-33-143
Effective: 2/07
Supersedes: 8/13/04
Summary
This kit lets you connect an Ethernet cable from your UDC controller to a hub or PC.
Contents
1 Ethernet RJ45 Cable, 2 Tie Wraps
Table 1 UDC2500 or UDC3200 procedure
Step Action
1
Figure 1 UDC2500/3200 terminal connections
If you have:
MDI-compliant hub with straight-through cable or
PC with crossover cable
then make these connections:
UDC Terminal
UDC Signal Name Wire
Color
RJ45 Socket Pin #
Hub/PC Signal Name
Position 14
Shield
Black/Bare
Shield
Shield
Position 15
RX-
Orange
6
TX-
Position 16
RX+
White/Orange
3
TX+
Position 17
TX-
Brown
2
RX-
Position 18
TX+
White/Brown
1
RX+
2
If you have PC with straight-through cable then make these connections:
UDC Terminal
UDC Signal Name Wire
Color
RJ45 Socket Pin #
PC Signal Name
Position 14
Shield
Black/Bare
Shield
Shield
Position 15
RX-
Brown
2
TX-
Position 16
RX+
White/Brown
1
TX+
Position 17
TX-
Orange
6
RX-
Position 18
TX+
White/Orange
3
RX+
3
Secure cable to controller by attaching tie wraps through the holes in the controller flange.
Page 1 of 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
