Honeywell 1991I - User Manual

Page 2 - Getting Started; When the

1 Agency Model: 1991iSR and 1991iMR+ Note: Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the ...

Page 3 - Connecting the Base

2 Connecting the Base USB: Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster.

Page 6 - Standard Product Defaults

5 Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established. If the scanner beeps once, the link has b...

Page 7 - USB Serial

6 USB Serial Scan the following code to program the scanner to emulate a regular RS232-based COM Port. Apple® Macintosh computers recognize the scanner as a USB CDC class device and automati-cally use a class driver. Note: No extra configuration (e.g., baud rate) is necessary. USB PC Keyboard Scan t...

Page 8 - Keyboard Country; Belgium

7 Keyboard Country Scan the appropriate country code below to program the key-board layout for your country or language. By default, national character replacements are used for the following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User Guide to view the ch...

Page 9 - Locked Link; Great Britain

8 Note: For a complete list of country codes, see the User Guide for your product . Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad-vertently placed into the base. If you do place a different scan-ner into the base...

Page 10 - Override Locked Scanner; bar code with a new; Unlinking the Scanner; Unlink Scanner; bar code to unlink a scanner.; Override Locked Scanner

9 To use a different scanner, you need to unlink the original scan-ner by scanning the Unlink Scanner bar code. Override Locked Scanner If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner bar code with a new scanner, and place that scanner in th...

Page 11 - Trigger; The following bar codes will allow you to use the scanner in; Manual Trigger - Normal Mode; (need to press the trigger to; Presentation mode; (the scanner is activated when it; Streaming PresentationTM; Manual Trigger - Normal

10 Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a bar code). Note: Presentation Mode continuously draws power, so use of the external power supply is...

Page 12 - Suffix; If you want a carriage return after the bar code, scan the; Add CR; bar code. To add a tab after the bar code, scan the; Add; bar; Add Code ID Prefix to all Symbologies; Note: For a complete list of Code IDs, see the User’Guide for your; Add CR Suffix

11 Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes. Add Code ID Prefix to all Symbologies Scan the following bar code if you ...

Page 13 - Product documentation is available at; Enable

12 Function Code Transmit When this selection is enabled and function codes are con-tained within the scanned data, the scanner transmits the func-tion code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in keyboard wedge mode, the scan code is c...

Page 14 - Granit XP 1991iSR and 1991iXR Industrial Area-Imaging Scanner

Page 1 1991-ML-RS-01 Rev (a) Granit XP 1991iSR and 1991iXR Industrial Area-Imaging Scanner Agency Model: 1991i Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible à www.honeywellaidc.com. La documentation du produit est disponible sur le site w...

Page 17 - Limited Warranty; Resources > Product Warranty; Patents

13 Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty . Patents For patent information, see www.hsmpats.com . Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information conta...

Honeywell 1991I - User Manual

Table of Contents:

Other Manuals for Honeywell 1991I

Summary

Other Honeywell Models