Honeywell 1991I - Manual - manualsarea.com

Page 2 - Getting Started; When the

1 Agency Model: 1991i Note: Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the ...

Page 3 - PSS-BatteryMaintenance

2 Before you attempt to use, charge or replace the battery in the device, carefully read all labels, markings and product documentation provided in the box or online at sps.honeywell.com . To learn more about Battery Maintenance for Portable Devices, go to honeywell.com/PSS-BatteryMaintenance . Avan...

Page 4 - Connecting the Base

3 Connecting the Base USB: Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster.

Page 9 - Keyboard Country

8 Keyboard Country Scan the appropriate country code below to program the key-board layout for your country or language. By default, national character replacements are used for the following characters: #$@[\]^‘{|}~. Refer to the ISO 646 Character Replacements chart in your User Guide to view the c...

Page 10 - Locked Link

9 Note: For a complete list of country codes, see the User Guide for your product . Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad-vertently placed into the base. If you do place a different scan-ner into the base...

Page 11 - Override Locked Scanner; barcode with a new; Unlinking the Scanner; Unlink Scanner; barcode to unlink a scanner.

10 To use a different scanner, you need to unlink the original scan-ner by scanning the Unlink Scanner barcode. Override Locked Scanner If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner barcode with a new scanner, and place that scanner in the...

Page 12 - Trigger; The following barcodes will allow you to use the scanner in; Manual Trigger - Normal Mode; (need to press the trigger to; Presentation mode; (the scanner is activated when it; Streaming PresentationTM

11 Trigger The following barcodes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a barcode). Note: Presentation Mode continuously draws power, so use of the external power supply is r...

Page 13 - Suffix; If you want a carriage return after the barcode, scan the; Add CR; barcode. To add a tab after the barcode, scan the; Add Tab; barcode to; Add Code ID Prefix to all Symbologies; Note: For a complete list of Code IDs, see the User Guide for your

12 Suffix If you want a carriage return after the barcode, scan the Add CR Suffix barcode. To add a tab after the barcode, scan the Add Tab Suffix barcode. Otherwise, scan the Remove Suffix barcode to remove the suffixes. Add Code ID Prefix to all Symbologies Scan the following barcode if you wish t...

Page 14 - Function Code Transmit

13 Function Code Transmit When this selection is enabled and function codes are con-tained within the scanned data, the scanner transmits the func-tion code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in keyboard wedge mode, the scan code is c...

Honeywell 1991I - Manual

Table of Contents:

Other Manuals for Honeywell 1991I

Summary

Other Honeywell Models