Honeywell 00002 - User Manual

PRODUCT DATA

Commercial Touchscreen Thermostat

CONNECTED DEVICE FOR COMMERCIAL BUILDINGS

Trademark Information

TBD

Disclaimer

All images used in this document are for illustrative

purposes only and may not match the actual product.

APPLICATION

TC500A-N/TC500B-NThermostat is an advanced,

configurable, connected device for commercial buildings.

It controls and monitors RTU, AHU, Heat Pump equipment,

and their configurations. This device communicates over

Wi-Fi, Bluetooth, BACnet IP, Sylk, easily integrates with the

building automation system.

The built-in intelligent control algorithms of the device

help to achieve the perfect balance between Energy

Efficiency and Comfort. The device is packaged with

numerous presets suitable for most commercial building

requirements that enable the easy and quick initial setup.

The firmware of the device can be upgraded via Wi-Fi

network. The device has four universal terminals and a

pair of Sylk terminals to connect with sensors or other

accessories. It also has a built-in temperature sensor,

humidity sensor, and proximity sensor.

FEATURES

• The device can be easily commissioned through Deploy

app after connected to Gateway.

• Easily customizable and intuitive UI.

• Supports BACnet system schedule and holiday

configuration.

• Multiple, configurable, levels of user privilege access

for features such as Reminders, Occupancy set points,

Date/Time, Schedules, Calendars of special events,

remote and local Manual Override, remote and local

Occupancy Override, Choice of language and units, and

so on.

• Multiple, configurable, screen lockouts to prevent

unauthorized settings changes.

• High level control algorithms such as Auto Changeover,

Adaptive Intelligent Recovery, Pre-occupancy Purge,

Power up disable time, Freeze protection, and Demand

limit controls are supported.

• Settings to switch Fahrenheit to Celsius and vice-versa.

• Auto display sleep to save energy when there is no user

action for configured time out.

• A LED indicator to show the operational status of the

thermostat when the display goes to sleep mode.

• Real-Time Clock time keeping accuracy with 72 hour

retention during power loss.

Equipment Control Features

• 4H/3C Heat Pump, 3H/3C Conventional and

modulating heat system

• Constant speed Fan, 2-speed Fan, and Variable Speed

Fan

• Packaged Economizer Coordination Output

• Multiple Dehumidification and Humidification options

• Service mode to manually command the outputs to test

the operation of the mechanical equipment

• Auto mode to switch between heating and cooling

according to the current space temperature

• Staging control, PID Tuning, CPH, OAT Lockout, DAT

Lockout, Modulating control

• Demand Limit Control to save energy

• System Switch Options

• Smoke Monitor