Heat & Glo SL-750TRS-IPI-D - Manual
Heat & Glo SL-750TRS-IPI-D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installers Guide; DO NOT; Owners Guide; ALERTED; SAFETY AND WARNING INFORMATION
- Page 3 – TABLE OF CONTENTS
- Page 4 – Service Parts; Part number list on following page.; Log Set Assembly
- Page 6 – Beginning Manufacturing Date:; Standing Pilot Ignition
- Page 8 – supply serial and model numbers to ensure correct service parts.; ACCESSORIES
- Page 11 – Intermittent Pilot Ignition
- Page 12 – Appliance Certification; The Heat & Glo appliance models discussed in this; Certification; Underwriters Laboratories; High Altitude Installations
- Page 13 – The following requirements reference various; Requirements for the Commonwealth of
- Page 14 – Getting Started; Introducing the Heat & Glo Gas Appliances; Pre-install Preparation; Do not install any
- Page 15 – GASS LINE
- Page 18 – Installing the Appliance; Step 1. Locating the Appliance; Vertical Sections; Constructing the Appliance Chase
- Page 19 – Framing Dimensions; Step 2. Framing the Appliance
- Page 22 – Step 3. Installing the Vent System; vent collars. This pipe is tested and; Vent System Termination Kits; Identifying Vent Components; . Detailed installation instructions
- Page 23 – Flex Vent; ELBOWS; For vertical venting; CAP; STRAIGHT OUT HORIZONTAL VENTING; Figure 11. Straight Out Horizontal Venting; elbows for corner installations.
- Page 24 – ELBOW NATURAL GAS
- Page 25 – Figure 14. Venting with Two 90° Elbows; H + H
- Page 26 – Figure 15. Venting with Two 90° Elbows; ELBOWS NATURAL GAS
- Page 27 – Figure 16. Venting with Two 90° Elbows
- Page 28 – Figure 17. Venting with Three 90° elbows; V H H + H
- Page 29 – Figure 18. Venting with three 90° elbows
- Page 30 – Figure 19. Venting with three 90° elbows
- Page 31 – Figure 20. Venting with Four 90° elbows
- Page 32 – DVP Series Venting Only:; Go to Step 4 Install Firestops.
- Page 35 – For Horizontal Terminations -; For DVP Venting Only:; Figure 29. Trapezoid Termination Cap
- Page 36 – = AREA WHERE TERMINAL IS NOT PERMITTED; Figure 30. Vent Termination Minimum Clearances; public; Alcove Applications
- Page 38 – Figure 33. Gas Control Systems; STANDING PILOT; Step 5. The Gas Control Systems; Standing Pilot Ignition and Intellifire Pilot Ignition (IPI).; Standing Pilot Ignition System; THE APPLIANCE JUNCTION BOX IN A IPI SYSTEM.
- Page 39 – Pressure
- Page 40 – Step 8. Wiring the Appliance; This appliance
- Page 41 – Optional Accessories; WARNING; Incorrect wiring will damage millivolt valves.
- Page 42 – Hearth Extensions; require; Figure 39. Sealant Material; FINISH WALL MATERIAL MAY BE; Junction Box Diagram
- Page 43 – Figure 40. Glass Assembly
- Page 44 – Step 11. Before Lighting the Appliance; Step 12. Lighting the Appliance
- Page 45 – Maintaining and Servicing Your Appliance; Appliance Maintenance; Placing Ember Material
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev. J • 5/06
1
Models:
SL-750TRS-IPI-D
SL-550TRS-IPI-D
SL-350TRS-C
Owner’s Manual
Installation and Operation
• Do not store or use gasoline or other flamma-
ble vapors and liquids in the vicinity of this or
any other appliance.
• What to do if you smell gas
- Do not try to light any appliance
- Do not touch any electrical switch. Do not
use any phone in your building.
- Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
- If you cannot reach your gas supplier, call
the fire department.
• Installation and service must be performed by
a qualified installer, service agency, or the gas
supplier.
WARNING: If the information in these
instructions is not followed exactly, a fire
or explosion may result causing proper-
ty damage, personal injury, or death.
This appliance has been supplied with an integral barrier
to prevent direct contact with the fixed glass panel. Do
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
HOT! DO NOT TOUCH
.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
WARNING
• Keep children away.
• CAREFULLY SUPERVISE children in same room as
appliance.
• Alert children and adults to hazards of high
temperatures.
• Do NOT operate with protective barriers open or
removed.
• Keep clothing, furniture, draperies and other
combustibles away.
Glass and other surfaces are hot during
operation and cool down.
DO NOT DISCARD THIS MANUAL
CAUTION
Important operating and
m a i n t e n a n c e i n s t r u c -
tions included.
This appliance may be installed as an OEM installation in
manufactured home (USA only) or mobile home and must
be installed in accordance with the manufacturer’s instruc-
tions and the manufactured home construction and safety
standard,
Title 24 CFR, Part 3280
or
Standard for Installa-
tion in Mobile Homes, CAN/CSA Z240MH.
This appliance is only for use with the type(s) of gas indi-
cated on the rating plate.
Installation and service of this appliance should be
performed by qualified personnel. Hearth & Home
Technologies suggests NFI certified or factory-trained
professionals, or technicians supervised
by an NFI certified professional.
•
•
•
DO NO
DO NO
DO NO
DO NO
DO NO
TTTTT
DISCARD
DISCARD
DISCARD
DISCARD
DISCARD
Read, understand and follow
t h e s e i n s t r u c t i o n s f o r s a f e
installation and operation.
Leave this manual with
party responsible for
use and operation.
In the Commonwealth of Massachusetts:
• installation must be performed by a licensed plumber or
gas fitter;
See Table of Contents for location of additional
Commonwealth of Massachusetts requirements.
Í
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev. J • 5/06 2 These units MUST use one of the vent systems described in the Installing the Appliance section ofthe Installers Guide . NO OTHER vent systems or components MAY BE USED. This gas appliance and vent assembly MUST be vented di...
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev. J • 5/06 3 TABLE OF CONTENTS Safety and Warning Information ......................................................... 2 Service Parts Lists ................................................................................. 4 Section 1:...
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev. J • 5/06 4 (NG, LP) Exploded Parts Diagram Service Parts SL-350TRS-C Beginning Manufacturing Date: 4-01 Ending Manufacturing Date: ______ Part number list on following page. 1 3 6 2 3 4 5 7 Log Set Assembly 1 2 8 11 1 0 9 1 4 1 5 1
