Heat & Glo 2137-900 - Manual

Heat & Glo 2137-900

Heat & Glo 2137-900 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
Page: / 55

Table of Contents:

  • Page 2 – Congratulations; Listing Label Information/Location; Owner’s Manual; Read this manual before installing or operating this appliance.; We recommend that you record the following; Homeowner Reference Information; NA; XXXXXXXX
  • Page 3 – Table of Contents; A. Maintenance Tasks
  • Page 4 – Models; TYPE: Direct Vent Gas Appliance Heater; CPSC 16 CFR Section; This installation must conform with local codes. In the; Listing and Code Approvals; Material which will not ignite and burn. Such materials are; WARNING; NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.
  • Page 5 – MANUFACTURER REQUIREMENTS; T h e f o l l o w i n g r e q u i r e m e n t s r e f e r e n c e va r i o u s
  • Page 6 – A. Design and Installation Considerations; Getting Started; C. Inspect Appliance and Components; • Read all of the instructions before starting the insta-; CAUTION; Any such action may cause a fi re hazard.
  • Page 7 – B. Mantel Projections; Framing and Clearances; A. Selecting Appliance Location
  • Page 8 – CLEARANCES TO COMBUSTIBLES; C. Constructing the Appliance Chase
  • Page 9 – A. Vent Termination Minimum Clearances; • Do not pack air space with insulation or other; Termination Locations; Measure horizontal clearances from this surface.
  • Page 10 – public; Covered Alcove Applications; NOT
  • Page 11 – • Vent this appliance directly outside.; ALL vent confi guration specifi cations MUST be followed.; Vent Information and Diagrams; C. Measuring Standards; Pipe measurements are shown using the effective length; Horizontal
  • Page 12 – Elbow only; Minimum; back to back
  • Page 13 – Three Elbows
  • Page 14 – One Elbow; Use the vertical termination baffl e for these applications:
  • Page 16 – A. Pipe Clearances to Combustibles; B. Wall Penetration Framing; Combustible Wall Penetration; • The opening must be framed on all four sides using the; Non-Combustible Wall Penetration
  • Page 17 – C. Vertical Penetration Framing; A ceiling fi restop; MUST; be used between; ATTIC ABOVE
  • Page 18 – D. Install Attic Insulation Shield; Flat Ceiling Installation; Vaulted Ceiling Installation
  • Page 19 – glasses during installation.; Appliance Preparation; An elbow heat shield is attached to the Soho24B.; Do not; ELBOW HEAT SHIELD; ROPE RING
  • Page 20 – B. Installation of Non-combustible Facing; Non-combustible material may be damaged if dropped.
  • Page 21 – C. Securing and Leveling the Appliance; • Do NOT notch into the framing around the appliance spacers.
  • Page 22 – Installing Vent Pipe; A. Assemble Vent Sections
  • Page 23 – B. Assemble Slip Sections; Pilot hole; • Apply a bead of silicone sealant inside the female outer; C. Secure the Vent Sections
  • Page 24 – D. Disassemble Vent Sections; E. Install Decorative Ceiling Components
  • Page 25 – F. Install Metal Roof Flashing; G. Assemble and Install Storm Collar; CAULK
  • Page 26 – H. Install Vertical Termination Cap; • Slide the decorative wall thimble over the last section of; Heat shields may not be fi eld constructed.; J. Heat Shield Requirements for Horizontal; • DO NOT remove the heat shields attached to the
  • Page 27 – Note; K. Install Horizontal Termination Cap
  • Page 28 – Gas Information; • If substituting for these components, please consult; Refer to; Reference Section 16; for location of gas line; Pressure
  • Page 29 – HIGH ALTITUDE INSTALLATIONS; • Ensure that gas line does not come in contact with outer
  • Page 30 – C. IntelliFire Ignition System Wiring; A. Recommendation for Wire; Electrical Information; B. Connecting to the Appliance; National Electric Code ANSI/NFPA 70-latest
  • Page 31 – D. Junction Box Installation; OUTSIDE; Do NOT wire
  • Page 32 – B. Mantel Projections; M U S T
  • Page 33 – Painting
  • Page 34 – Appliance Setup; A. Remove Shipping Materials; • Using non-listed accessories voids warranty.
  • Page 35 – Stone Placement: Soho24B; D. Positioning Stones; BURNER AREA; PILOT SHIELD
  • Page 37 – Removing Glass Assembly; NG; F. Air Shutter Setting
  • Page 38 – A. Before Lighting Appliance; HOT SURFACES
  • Page 39 – NOT FOR USE; Final inspection by
  • Page 40 – Initial Break-in Procedure; The appliance should be run three to four hours; C. After Appliance is Lit; ISSUE
  • Page 41 – Verify that 110/VAC power is “ON” to junction box.; Troubleshooting; A. IntelliFire Ignition System
  • Page 42 – Verify module is securely grounded to metal chassis of appliance.
  • Page 43 – When cleaning glass door:
  • Page 44 – Recommend addition of screen if one is not present.
  • Page 45 – Appliance Dimensions Table; Reference Materials; A. Appliance Dimension Diagram
  • Page 46 – SL Series Components; Cap Shield; B. Vent Components Diagrams
  • Page 48 – ASSEMBLY
  • Page 51 – ITEM; #11 IPI Valve Assembly
  • Page 52 – No longer available
  • Page 54 – This warranty is void if:; QRWOLPLWHGWRLPSURSHUFKLPQH\RUYHQWLQJLQVWDOODWLRQ; LIMITATIONS OF LIABILITY:; DWLRQRIJODVV
  • Page 55 – For the location of your nearest Heat & Glo dealer,; DO NOT DISCARD THIS MANUAL; • Leave this manual with; E. Contact Information
Loading the manual

1

Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12

Owner’s Manual

Installation and Operation

Model: Soho24B

DO NOT DISCARD THIS MANUAL

NOTICE

• Leave this manual with

party responsible for use
and operation.

DO NO

T

DISCARD

• Important operating

a n d m a i n t e n a n c e
instructions included.

• Read, understand and follow

these instructions for safe
installation and operation.

•

DO NOT

store or use gasoline or other fl am-

mable vapors and liquids in the vicinity of this
or any other appliance.

• What to do if you smell gas

-

DO NOT

try to light any appliance.

-

DO NOT

touch any electrical switch.

DO

NOT

use any phone in your building.

- Immediately call your gas supplier from a

neighbor’s phone. Follow the gas suppli-
er’s instructions.

- If you cannot reach your gas supplier, call

the fi re department.

• Installation and service must be performed

by a qualifi ed installer, service agency, or the
gas supplier.

WARNING: If the information in these

instructions is not followed exactly, a fi re
or explosion may result causing property
damage, personal injury, or death.

This appliance may be installed as an OEM installation in
manufactured home (USA only) or mobile home and must be
installed in accordance with the manufacturer’s instructions
and the manufactured home construction and safety standard,

Title 24 CFR, Part 3280

or

Standard for Installation in Mobile

Homes, CAN/CSA Z240MH, in Canada.

This appliance is only for use with the type(s) of gas indicated
on the rating plate.

Installation and service of this appliance should be
performed by qualifi ed personnel. Hearth & Home
Technologies suggests NFI certifi ed or factory trained
professionals, or technicians supervised by an NFI
certifi ed professional.

In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas fi tter.

See Table of Contents for location of additional Commonwealth
of Massachusetts requirements.

This appliance has been supplied with an integral barrier
to prevent direct contact with the fi xed glass panel. DO
NOT operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.

HOT SURFACES

!

Glass and other surfaces are hot during
operation AND cool down.

Hot glass will cause burns.

•

DO NOT

touch glass until it is cooled

• NEVER allow children to touch glass
• Keep children away

• CAREFULLY SUPERVISE children in same room as

fi replace.

• Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other fl ammable
materials.

• Keep clothing, furniture, draperies and other fl ammable

materials away.

WARNING

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Congratulations; Listing Label Information/Location; Owner’s Manual; Read this manual before installing or operating this appliance.; We recommend that you record the following; Homeowner Reference Information; NA; XXXXXXXX

Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on appliance: _______________...

Page 3 - Table of Contents; A. Maintenance Tasks

3 Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12  = Contains updated information. Table of Contents 1 Listing and Code Approvals A. Appliance Certifi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4B. Glass Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 4 - Models; TYPE: Direct Vent Gas Appliance Heater; CPSC 16 CFR Section; This installation must conform with local codes. In the; Listing and Code Approvals; Material which will not ignite and burn. Such materials are; WARNING; NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.

Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12 4 Models U.S. (0-2000 ft.) or Canada (2000-4500 ft.) Maximum Input BTU/h Minimum Input BTU/h Orifi ce Size (DMS) Soho24 (NG) US 14,000 N/A 50 CAN 12,600 N/A 51 Soho24LP US 13,000 N/A 59 CAN 11,700 N/A 60 MODELS: Soho24B LABORATORY: Underwriters Labor...

Other Heat & Glo Models

All Heat & Glo Other