Hamilton Beach 1G901 - Manual

Page 2 - WARNING; Blender Safety; DANGER; Requesting Assistance or Service

w WARNING Electrical Shock Hazard Plug into a grounded outlet.Do not remove ground.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death, fire, or electrical shock. Blender Safety You will be killed or seriously injured if you don’t follow instru...

Page 3 - SAVE THESE INSTRUCTIONS; Blender Operation – Quick Start Guide

Blender Safety • Read all instructions. • Plug into a grounded outlet. • Do not touch surfaces that may be hot. Use handles or knobs provided. • Extreme caution must be used when moving anappliance containing hot oil or other hot liquids. • Do not use appliance for other than intended use. • To prot...

Page 4 - Parts and Features

4 Parts and Features The parts and features for the 1G901/1G908/1G909/1G910/1G918/1G919 Blenders are shown on this page.Become familiar with all parts and features before using your blender. Your blender is designed for blending and mixing beverages. Note: The Blender is not designed to crush ice. I...

Page 5 - Operation; Operating the Blender

3. Plug the blender into anelectric outlet. 4. Place the ingredients to beblended into container. 5. Place the container ontothe base. Make sure itrests securely on the base. 6. Place the cover and fillercap on the container. 7. Set the Hi/Low switch(except model 1G901) tothe desired speed. See “Pro...

Page 6 - Professional Blending Techniques

Professional Blending Techniques Filling the container When filling the container with ingredients, followthese recommendations:• Use sufficient amount of liquid to ensure that the mixture is fluid and free-running at all times. Pourthe liquid into the container FIRST. • Cut solid ingredients into p...

Page 7 - Caring for the Blender; Cleaning Instructions

7 Caring for the Blender Cleaning Instructions General cleaning Do not allow food residue to dry on any part of theblender. Wash and rinse container, cutter unitassembly and base after each use, or whenever itwill not be used again within one hour, as follows: 1. Remove the container from the base, ...

Page 8 - Maintenance

Troubleshooting Guide Replacement Parts Caring for the Blender Problem . . . Solution . . . Blender fails to startor stops while it isrunning and cannotbe restarted • Check to see if unit is securely plugged into an electric outlet. • Check to see if the fuse for the electric outlet has blown or if ...

Hamilton Beach 1G901 - Manual

Table of Contents:

Summary

Other Hamilton Beach Models