Page 3 - Table of Contents
Table of Contents INTRODUCTION ............................................... 2 Contact Info.................................................... 2Machine Description ...................................... 2Manual Accuracy ........................................... 2Identification ....................
Page 4 - Contact Info; Manual Accuracy; INTRODUCTION; Machine Description
-2- Model G1033/X/Z (Mfd. Since 04/19) We stand behind our machines! If you have ques-tions or need help, contact us with the information below. Before contacting, make sure you get the serial number and manufacture date from the machine ID label. This will help us help you faster. Grizzly Technical...
Page 5 - Identification
Model G1033/X/Z (Mfd. Since 04/19) -3- Identification Become familiar with the names and locations of the controls and features shown below to better understand the instructions in this manual. To reduce your risk of serious injury, read this entire manual BEFORE using machine. Return Rollers Table ...
Page 6 - Components
-4- Model G1033/X/Z (Mfd. Since 04/19) Controls & Components G. Return Rollers: Assist sliding workpiece back to operator following planing operation. H. Dust Hood: Connects to a dust-collection system to extract shavings and dust during operation. C. Feed Rate Control Knob: Selects 28 FPM feed ...
Page 7 - Internal Components
Model G1033/X/Z (Mfd. Since 04/19) -5- Internal Components Figure 3. Workpiece path and major planing components (side cutaway view). A. Anti-Kickback Fingers: Provide additional safety for the operator. B. Serrated Infeed Roller: Pulls the workpiece toward the cutterhead. C. Chip Breaker: Breaks of...
Page 8 - Model Number
-6- Model G1033/X/Z (Mfd. Since 04/19) Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G1033, G1033X, G1033Z PLANERS Model Number G1033 G1033X G1033Z Product Dimensions Weight 702 lbs. 775 lbs 702 lbs. Width (side-to-side) x Depth (front-to-back) x He...
Page 10 - NOTICE; Safety Instructions for Machinery
-8- Model G1033/X/Z (Mfd. Since 04/19) ELECTRICAL EQUIPMENT INJURY RISKS. You can be shocked, burned, or killed by touching live electrical components or improperly grounded machinery. To reduce this risk, only allow qualified service personnel to do electrical installation or repair work, and alway...
Page 12 - Additional Safety for Planers
-10- Model G1033/X/Z (Mfd. Since 04/19) Amputation, serious cuts, entanglement, or death can occur from contact with rotating cutterhead or other moving parts! Flying chips can cause eye injuries or blindness. Workpieces or knives thrown by cutterhead can strike nearby operator or bystanders with de...
Page 13 - SECTION 2: POWER SUPPLY; Availability
Model G1033/X/Z (Mfd. Since 04/19) -11- SECTION 2: POWER SUPPLY Availability Before installing the machine, consider the avail-ability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minim...
Page 15 - Needed for Setup; Unpacking
Model G1033/X/Z (Mfd. Since 04/19) -13- SECTION 3: SETUP Needed for Setup SUFFOCATION HAZARD! Keep children and pets away from plastic bags or packing materials shipped with this machine. This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become fam...
Page 16 - Inventory
-14- Model G1033/X/Z (Mfd. Since 04/19) Inventory B D C E Figure 5. Box inventory. LOW HIGH F G H I J K L M R S T U W V Figure 6. Tools and hardware. Figure 8. Tools and hardware (G1033X only). O N P Q Figure 7. Tools and hardware (G1033 & G1033Z only). NOTICE If you cannot find an item on this ...
Page 17 - Cleanup
Model G1033/X/Z (Mfd. Since 04/19) -15- T23692—Orange Power DegreaserA great product for removing the waxy ship-ping grease from the non-painted parts of the machine during clean up. The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that prevents corrosion during ...
Page 18 - Site Considerations; Weight Load
-16- Model G1033/X/Z (Mfd. Since 04/19) Site Considerations Figure 10. Minimum working clearances. Weight Load Refer to the Machine Data Sheet for the weight of your machine. Make sure that the surface upon which the machine is placed will bear the weight of the machine, additional equipment that ma...
Page 19 - Assembly
Model G1033/X/Z (Mfd. Since 04/19) -17- Lifting & Placing Assembly The machine must be fully assembled before it can be operated. Before beginning the assembly process, refer to Needed for Setup and gather all listed items. To ensure the assembly process goes smoothly, first clean any parts that...
Page 22 - Test Run; STOP Button; Recommended
-20- Model G1033/X/Z (Mfd. Since 04/19) Test Run Once assembly is complete, test run the machine to ensure it is properly connected to power and safety components are functioning correctly. If you find an unusual problem during the test run, immediately stop the machine, disconnect it from power, an...
Page 23 - SECTION 4: OPERATIONS; Operation Overview
Model G1033/X/Z (Mfd. Since 04/19) -21- SECTION 4: OPERATIONS Operation Overview The purpose of this overview is to provide the nov-ice machine operator with a basic understanding of how the machine is used during operation, so the machine controls/components discussed later in this manual are easie...
Page 24 - Wood Types
-22- Model G1033/X/Z (Mfd. Since 04/19) Workpiece Inspection Some workpieces are not safe to use or may require modification before they are. Before cut- ting, inspect all workpieces for the following: • Material Type: This machine is only intend-ed for workpieces of natural wood fiber Attempting to...
Page 25 - Chipped Grain
Model G1033/X/Z (Mfd. Since 04/19) -23- Planing Tips Cutting Problems • Inspect your lumber for twisting or cupping, and surface one face on a jointer if necessary before planing workpiece. • Scrape off all glue when planing glued-up panels. Dried glue can quickly dull knives/inserts. • DO NOT plane...
Page 26 - Depth of Cut; Chip Marks or Indentations
-24- Model G1033/X/Z (Mfd. Since 04/19) Depth of Cut Pitch & Glue Build-up Problem: Glue and resin buildup on the rollers and cutterhead will cause overheating by decreas-ing cutting sharpness while increasing drag in the feed mechanism. The result can include scorched lumber, uneven knife/inser...
Page 27 - Bed Roller Height
Model G1033/X/Z (Mfd. Since 04/19) -25- Bed Roller Height Items Needed Qty Hex Wrench 3mm .............................................. 1Open-End Wrench 14mm .................................. 1Rotacator (optional, Page 30) ........................... 1 Bed Roller Height Range ..............0.002&#...
Page 31 - Cutterhead Inserts
Model G1033/X/Z (Mfd. Since 04/19) -29- Rotating /Replacing Cutterhead Inserts (G1033X) Figure 30. Insert rotating sequence. Items Needed Qty Phillips Screwdriver #2 ...................................... 1Wrench or Socket 10mm ................................... 1Torque Wrench ........................
Page 32 - SECTION 5: ACCESSORIES; order online at
-30- Model G1033/X/Z (Mfd. Since 04/19) SECTION 5: ACCESSORIES ACCESSORIES order online at www.grizzly.com or call 1-800-523-4777 Installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories ...
Page 34 - SECTION 6: MAINTENANCE; Schedule
-32- Model G1033/X/Z (Mfd. Since 04/19) SECTION 6: MAINTENANCE To reduce risk of shock or accidental startup, always disconnect machine from power before adjustments, maintenance, or service. Schedule For optimum performance from your machine, follow this maintenance schedule and refer to any specif...
Page 35 - Table Height Chain & Sprockets
Model G1033/X/Z (Mfd. Since 04/19) -33- Feed Roller Bushings Oil Type ................ SB1365 or ISO 68 EquivalentOil Amount .......................................... 2–3 DropsFrequency ................ Every 8 Hours of Operation Table Height Worm Gear Grease Type ......... T26419 or NLGI#2 Equival...
Page 36 - Drive Chain & Sprockets; Gearbox Oil
-34- Model G1033/X/Z (Mfd. Since 04/19) Drive Chain & Sprockets Grease Type ......... T26419 or NLGI#2 EquivalentFrequency ............ Every 160 Hours of Operation Figure 44. Gearbox cover removed to expose drive chains and sprockets for lubrication. Gearbox Oil Oil Type .............. T28042 o...
Page 37 - Troubleshooting
Model G1033/X/Z (Mfd. Since 04/19) -35- SECTION 7: SERVICE Troubleshooting Motor & Electrical Symptom Possible Cause Possible Solution Machine does not start, or power-supply fuse/breaker trips immediately after startup. 1. STOP button depressed/at fault (G1033X). 2. Incorrect power supply volta...
Page 38 - Machine Operation
-36- Model G1033/X/Z (Mfd. Since 04/19) Motor & Electrical (Cont.) Machine Operation Symptom Possible Cause Possible Solution Machine has vibration or noisy operation. 1. Knives dull or misaligned. 2. Motor or component loose. 3. V-belt(s) worn, loose, or slapping cover. 4. Pulley loose. 5. Bed ...
Page 42 - Using a Rotacator
-40- Model G1033/X/Z (Mfd. Since 04/19) Using a Rotacator Items Needed Qty Phillips Screwdriver #2 ...................................... 1Hex Wrenches 3mm, 5mm ..........................1 Ea. Wrench or Socket 10mm .............................1 Ea.Rotacator (see Page 30) ..............................
Page 43 - Using Wood Blocks
Model G1033/X/Z (Mfd. Since 04/19) -41- Using Wood Blocks Items Needed Qty Phillips Screwdriver #2 ...................................... 1Hex Wrench 3mm, 5mm .................................... 1 Wrench or Socket 10mm ................................... 12x4 6' Long ..................................
Page 45 - Adjusting Feed-Roller
Model G1033/X/Z (Mfd. Since 04/19) -43- Positioning Chip Deflector Items Needed: Qty Wrench or Socket 10mm ................................... 1Hex Wrench 5mm .............................................. 1 Chip Deflector Gap SettingIf Planer Used w/Dust Collector ...................... 1 ⁄ 4 '' If...
Page 46 - Kickback Fingers
-44- Model G1033/X/Z (Mfd. Since 04/19) Calibrating Table Height Scale Although correctly set at the factory, the table height scale can be adjusted for accuracy if it becomes necessary. Items Needed Qty Phillips Screwdriver #2 ...................................... 1Scrap Piece of Stock ..............
Page 47 - Checking Pulley
Model G1033/X/Z (Mfd. Since 04/19) -45- Tensioning Table Height Chain The table height chain is located under the table. It transfers movement from the handwheel to the columns that control table height. The chain drive can be adjusted to remove slack if the chain stretches over time or is loosened ...
Page 48 - Table Parallelism Inspection
-46- Model G1033/X/Z (Mfd. Since 04/19) Adjusting Table Parallelism Figure 65. Front-to-back parallelism of table and cutterhead. How the table sits in relation to the head cast-ing from front-to-back is also important (see Figure 65). Because the feed rollers, pressure bar, and chip breaker are adj...
Page 50 - Wiring Safety Instructions
-48- Model G1033/X/Z (Mfd. Since 04/19) SHOCK HAZARD. Working on wiring that is con-nected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine bef...
Page 52 - G1033 Electrical Components
-50- Model G1033/X/Z (Mfd. Since 04/19) READ ELECTRICAL SAFETY ON PAGE 48! G1033 Electrical Components Figure 68. G1033 motor junction box. Figure 69. G1033 start capacitor. Figure 67. G1033 magnetic switch with cover removed.
Page 54 - G1033X Electrical Components
-52- Model G1033/X/Z (Mfd. Since 04/19) READ ELECTRICAL SAFETY ON PAGE 48! G1033X Electrical Components Figure 71. G1033X control panel wiring. Figure 70. G1033X magnetic switch with cover removed. Figure 73. G1033X motor junction box. Figure 72. G1033X capacitors.
Page 56 - G1033Z Electrical Components
-54- Model G1033/X/Z (Mfd. Since 04/19) READ ELECTRICAL SAFETY ON PAGE 48! G1033Z Electrical Components Figure 75. G1033Z motor junction box. Figure 76. G1033Z capacitors. Figure 74. G1033Z magnetic switch with cover removed.
Page 69 - G1033X Stand & Motor Parts List
Model G1033/X/Z (Mfd. Since 04/19) -67- BUY PARTS ONLINE AT GRIZZLY.COM ! Scan QR code to visit our Parts Store. G1033X Stand & Motor Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 19 P1033X019 FLANGE SCREW M6-1 X 12 169V6-3 P1033X169V6-3 MOTOR FAN 39V2 P1033X039V2 MAGNETIC SWITCH SDE ...
Page 71 - G1033X Table & Base Parts List
Model G1033/X/Z (Mfd. Since 04/19) -69- BUY PARTS ONLINE AT GRIZZLY.COM ! Scan QR code to visit our Parts Store. G1033X Table & Base Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 107 P1033X107 EXTENSION WING 150 P1033X150 PHLP HD SCR M5-.8 X 10 108 P1033X108 HEX BOLT M8-1.25 X 25 151 ...
Page 73 - WARRANTY CARD
C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...
